Preparation and characterization of paraffin/nickel foam composites as neutron-shielding materials

Abstract

Traditional neutron-shielding materials usually have poor mechanical properties and secondary gamma-shielding capability. The new requirements of modern neutron-shielding materials are difficult to satisfy. A paraffin/nickel foam neutron-shielding composite was prepared and characterized in this study. Open-cell nickel foams were fabricated through electrodeposition. Subsequently, the paraffin/nickel foam composite were prepared by filling the open-cell nickel foams with melted paraffin. The intrinsic parameters of nickel foam and the content of neutron absorber (boron carbide) were controlled to optimize the composite. The mechanical properties of the composite were studied through a static compression test. The compressive strength improved to 0.4 times that of the nickel foams. The Am–Be source transmittance experiment showed that the 8 cm thick PFM presented a neutron transmittance of 56.1%, and the 6 cm thick boron carbide/paraffin/nickel foam (PFM-B) presented a neutron transmittance of 37.6%. The paraffin/nickel foam and PFM-B had approximately the same shielding efficiency as paraffin and boron carbide/paraffin, respectively. However, the second gamma ray shielding efficiency of the paraffin/nickel foam and PFM-B was significantly higher than that of paraffin and boron carbide/paraffin. The mechanical properties and secondary gamma ray-shielding capability of the composite can be improved by increasing the relative density of nickel foams.

Keywords

Paraffin boron carbide nickel foams composite neutron shielding

Get full access to this article

View all access options for this article.

References

Hayashi

Tobita

Nakamori

et al.

Advanced neutron shielding material using zirconium borohydride and zirconium hydride. J Nucl Mater 2009; 386–388: 119–121.

Chen

Nambiar

et al.

PMMA/MWCNT nanocomposite for proton radiation shielding applications. Nanotechnology 2016; 27: 10–10.

Jun

Kim

Bae

et al.

Enhancement of dispersion and adhesion of B4C particles in epoxy resin using direct ultrasonic excitation. J Nucl Mater 2011; 416: 293–297.

Kim

Lee

B-C

Uhm

et al.

Enhancement of thermal neutron attenuation of nano-B4C, -BN dispersed neutron shielding polymer nanocomposites. J Nucl Mater 2014; 453: 48–53.

Moon

. Mechanical properties and thermal neutron shielding efficiency of high B amorphous ribbons in the Fe-B-Mo-Cr system. Met Mater – Int 2016; 22: 825–830.

Ozdemir

Akbay

Uzun

et al.

Neutron shielding of EPDM rubber with boric acid: mechanical, thermal properties and neutron absorption tests. Prog Nucl Energy 2016; 89: 102–109.

Morioka

Sakurai

Okuno

et al.

Development of 300℃ heat resistant boron-loaded resin for neutron shielding. J Nucl Mater 2007; 367–370: 1085–1089.

Jin-Ju

Sung-Mo

Min-Ku

et al.

Enhancement in the microstructure and neutron shielding efficiency of sandwich type of 6061Al-B4C composite material via hot isostatic pressing. Nucl Eng Des 2015; 282: 1–7.

Fletcher

Gupta

. Mechanical properties of elastomer nanocomposites for electromagnetic interference shielding applications. J Compos Mater 2014; 48: 1261–1276.

10.

Dixit

Ghosh

. Radiation heat transfer in high porosity open-cell metal foams for cryogenic applications. Appl Thermal Eng 2016; 102: 942–951.

11.

Ibrahim

. Heat generation and corresponding rise in temperature due to absorption of thermal neutrons in several shielding materials. Ann Nucl Energy 2002; 29: 1131–1136.

12.

Ryan

Christiansen

. Hypervelocity impact testing of advanced materials and structures for micrometeoroid and orbital debris shielding. Acta Astronaut 2013; 83: 216–231.

13.

Bhingardive

Sharma

Suwas

et al.

Polyvinylidene fluoride based lightweight and corrosion resistant electromagnetic shielding materials. RSC Adv 2015; 5: 35909–35916.

14.

Yiou

Cantwell

Mines

et al.

Low-velocity impact performance of lattice structure core based sandwich panels. J Compos Mater 2014; 48: 3153–3167.

15.

Chen

Bourham

Rabiei

. Neutrons attenuation on composite metal foams and hybrid open-cell Al foam. Radiat Phys Chem 2015; 109: 27–39.

16.

Chen

Bourham

Rabiei

. Attenuation efficiency of X-ray and comparison to gamma ray and neutrons in composite metal foams. Radiat Phys Chem 2015; 117: 12–22.

17.

Badiche

Forest

Guibert

et al.

Mechanical properties and non-homogeneous deformation of open-cell nickel foams: application of the mechanics of cellular solids and of porous materials. Mater Sci Eng A – Struct Mater Prop Microstruct Process 2000; 289: 276–288.

18.

Xiao

Zhang

. Preparation and thermal characterization of paraffin/metal foam composite phase change material. Appl Energy 2013; 112: 1357–1366.

19.

Devivier

Tagliaferri

Trovalusci

et al.

Mechanical characterization of open cell aluminium foams reinforced by nickel electro-deposition. Mater Des 2015; 86: 272–278.

20.

Tan

Reid

Harrigan

. On the dynamic mechanical properties of open-cell metal foams – a re-assessment of the ‘simple-shock theory’. Int J Solids Struct 2012; 49: 2744–2753.

21.

NSK

Raghavan

et al.

The effect of slurry composition on the microstructure and mechanical properties of open-cell Inconel foams manufactured by the slurry coating technique. Mater Sci Eng A – Struct Mater Prop Microstruct Process 2017; 687: 123–130.

22.

Chai

Tang

et al.

Preparation and properties of flexible flame-retardant neutron shielding material based on methyl vinyl silicone rubber. J Nucl Mater 2015; 464: 210–215.

23.

Szlancsik

Katona

Bobor

et al.

Compressive behaviour of aluminium matrix syntactic foams reinforced by iron hollow spheres. Mater Des 2015; 83: 230–237.

24.

Campbell

Suralvo

Hibbard

et al.

Foamed core microtruss nanocrystalline Ni cellular hybrids. J Compos Mater 2012; 46: 63–70.

25.

Kishimoto

Wang

Tanaka

et al.

Compressive mechanical properties of closed-cell aluminum foam-polymer composites. Compos Pt B – Eng 2014; 64: 43–49.

26.

Belhadj

A-E

Gavrus

Bernard

et al.

Mechanical and numerical analysis concerning compressive properties of tin-lead open-cell foams. J Mater Eng Perform 2015; 24: 4140–4155.

27.

Jung

Pullen

Proud

. Strain-rate effects in Ni/Al composite metal foams from quasi-static to low-velocity impact behaviour. Compos Pt A – Appl Sci Manuf 2016; 85: 1–11.

28.

Campbell

Forte

Hibbard

et al.

Periodic cellular metal/polyurethane foam hybrid materials. J Compos Mater 2009; 43: 207–216.