Thermoset composites represent a substantial challenge for recycling, even as composite products increase in market interest. The concept of putting all future thermoset composite products into landfills over the next decades is unlikely to continue. This paper examines the three eras in the history of thermoset product recycling, the drivers for increased recycling, and possible future trends. Technology for managing thermoset composite products at end-of-life first focused on retrieving fiber and to a lesser extent resin. Then in a second era, research focused on better utilization of recovered fiber and finally the third era is now keeping more of the original resin–fiber structure to reuse these composites. Drivers are emerging to stimulate thermoset recycling, including States with success in recycling other challenging products (tires, carpets, automobile parts, etc.) setting policy and fees to encourage recycling. The evolution of heat recovery as a thermoset recycling option in Europe is another driver. Additionally, efforts at certification of recycled fiber quality may stimulate greater reuse.
Carpet America Recovery Effort (CARE) Annual Report. Developing market based solutions for the recycling & reuse of post-consumer carpet, Dalton, GA: Carpet America Recovery Effort, 2015, pp. 42–42.
2.
North Carolina Department of Environmental Quality. Annual reporting – local government and solid waste facility reporting, Raleigh, NC, 2014–2015.
PalmerJSavageIGhitaOet al.Sheet moulding compound (SMC) from carbon fibre recyclate. Compos Part A2010; 41: 1232–1237.
6.
PickeringS. Recycling technologies for thermoset composite materials – current status. Compos Part A2006; 37: 1206–1215.
7.
GramannHKrappRBertramV. Disposal and recycling of HSC materials. Ship Sci Technol2009; 3: 93–106.
8.
PimentaSPinhoS. Recycling carbon fiber-reinforced polymers for structural applications: technology review and market outlook. Waste Manage2011; 31: 378–392.
9.
MorinCLoppinet-SeraniACanselFet al.Near- and super critical solvolysis of carbon fibre reinforced polymers (CFRPs) for recycling carbon fibres as a valuable resource: state of the art. J Supercrit Fluids2012; 66: 232–240.
10.
YangPZhouQYuanXet al.Highly efficient solvolysis of epoxy resin using polyethylene glycol/NaOH systems. Polym Degrad Stab2012; 97: 1101–1106.
11.
AsmatuluETwomeyJOvercashM. Recycling of fiber-reinforced composites and direct structural composite recycling concept. J Compos Mater2014; 48: 593–608.
12.
OliveuxGDandyLLeekeG. Current status of recycling of fibre reinforced polymers: review of technologies, reuse and resulting properties. Prog Mater Sci2015; 72: 61–99.
13.
Guitierrez E and Bono T. Review of industrial manufacturing capacity for fibre-reinforced polymers as prospective structural components in shipping containers. Report of the joint Research Centre of the European Commission, http://ipsc.jrc.ec.europa.eu/, ISSN 1831-9424, 28p (2013, accessed 26 June 2017).
Åström AH. Model for end of life treatment of polymer composite materials. Doctoral Thesis, Department of Machine Design, Royal Institute of Technology, Stockholm, 2011.
16.
Molnar A. Recycling advanced composites. Clean Washington Center, Pacific Northwest Economic Region, 2200 Alaskan Way, Suite 460, Seattle, Washington 98121, 1995, p.14.
17.
Palmer J. Mechanical recycling of automotive composites for use as reinforcement in thermoset composites. PhD in Engineering Dissertation, University of Exeter, Exeter, UK, 2009.
18.
PickeringSKellyRKennerleyJet al.A fluidized bed process for the recovery of glass fibres from scrap thermoset composites. Compos Sci Technol2000; 60: 509–523.
Nakagawa M, Shibata K and Kuriya H. Characterization of CFRP using recovered carbon fibers from waste CFRP. In: 2nd international symposium on fiber recycling, Atlanta, Georgia, USA, 11–12 May 2009.
21.
HernanzRSernaJDoddCet al.Chemical recycling of carbon fiber composites using alcohols under subcritical and supercritical conditions. J Supercrit Fluids2008; 46: 83–92.
22.
HydeJLesterEKingmanSet al.Supercritical propanol, a possible route to composite carbon fibre recovery: a viability study. Compos Part A2006; 37: 2171–2175.
Takahashi J, Matsutsuka N, Okazumi T, et al. Mechanical properties of recycled CFRP by injection molding method. In: 16th international conference on composite materials, Kyoto, Japan, 8–13 July 2007.
25.
Suzuki T and Takahashi J. Prediction of energy intensity of carbon fiber reinforced plastics for mass-produced passenger cars. In: 9th Japan international SAMPE symposium, Tokyo, Japan, 29 November–2 December 2005.
26.
OgiKNishikawaTOkanoYet al.Mechanical properties of ABS resin reinforced with recycled CFRP. Adv Compos Mater2007; 16: 181–194.
27.
KouparitsasCKartalisCVarelidisPet al.Recycling of the fibrous fraction of reinforced thermoset composites. Polym Compos2002; 23: 682–689.
28.
KennerleyJKellyRFenwickNet al.The characterization and reuse of glass fibres recycled from scrap composites by the action of a fluidised bed process. Compos Part A1998; 29: 839–845.
29.
TurnerTPickeringSWarriorN. Development of recycled carbon fiber moulding compounds: preparation of waste composites. Compos Part B2011; 42: 517–525.
30.
TorresAMarcoICaballeroBet al.Recycling by pyrolysis of thermoset composites: Characteristics of the liquid and gaseous fuels obtained. Fuel2000; 79: 897–902.
31.
Pimenta S. Toughness and strength of recycled composites and their virgin precursors. PhD Thesis, Imperial College London, London, UK, 2013.
PimentaAPinhoSRobinsonPet al.Mechanical analysis and toughening mechanisms of a multiphase recycled CFRP. Compos Sci Technol2010; 70: 1713–1725.
34.
MeyerLSchulteK. CFRP-recycling following a pyrolysis route: process optimization and potential. J Compos Mater2009; 43: 1121–1132.
35.
Connor M. Characterization of recycled carbon fibers and their formation of composites using injection molding. Master’s Thesis, North Carolina State University, NC, USA, 2008.
36.
Elghazzaoui H. Contribution a l’etude de la degradation des composites carbone/epoxy par sololyse dans l’eau subcritique and supercritique en vue de leur recyclage. PhD Thesis, University de Nantes, Nantes, France, 2012.
37.
BaiYWangZFengL. Chemical recycling of carbon fibers reinforced epoxy resin composites in oxygen in supercritical water. Mater Des2010; 31: 999–1002.
GrecoAMaffezzoliABuccolieroGet al.Thermal and chemical treatments of recycled carbon fibres for improved adhesion to polymeric matrix. J Compos Mater2013; 47: 369–377.
40.
FengNWangXWuD. Surface modification of recycled carbon fiber and its reinforcement effect on nylon 6 composites: mechanical properties, morphology and crystallization behaviours. Curr Appl Phys2013; 13: 2038–2050.
41.
Goodine E. DiscoTex®: highly formable carbon fiber fabric. In: SAMPE conference and exhibition, Seattle, WA,17–20 May 2010.
Howarth J, Jones F and Hayes S. Interface optimization of recycled carbon fibre composites. In: Proceedings of the 18th international conference on composite materials (ICCM-18), Jeju Island, South Korea, 21–26 August, 2011.
44.
Montes-MoranMvan HattumFNunesJet al.A study of the effect of plasma treatment on the interfacial properties of carbon fibre-thermoplastic composites. Carbon2005; 43: 1778–1814.
ChabertEVialJCauchoisJ-Pet al.Multiple welding of long fiber epoxy vitrimer composites. Soft Matter2016; 12: 4838–4845.
48.
Schmidt D and Reynaud E. Plastics engineering department, University of Massachusetts, Lowell, NSF SEP report, Collaborative – achieving a sustainable energy pathway for wind turbine blade manufacturing, grant 1230884, National Science Foundation, Washington, DC 2016.
49.
Twomey J and Overcash M.Wichita State University, NSF SEP: collaborative: achieving a sustainable energy pathway for wind turbine blade manufacturing, grant number: 1230891, annual report, National Science Foundation, Washington, DC, 2016.
Takahashi J, Matsutsuka N, Okazumi T, et al. Mechanical properties of recycled CFRP by injection molding method. In: Proceedings of the 16th international conference on composite materials, Kyoto, Japan, 8–13 July, 2007.
