This study deals with a micromechanical detection of stiffness degradation occurred by the fiber damage in vibrating laminated composite plates. Five unknown parameters are considered to determine the fiber or matrix damage distribution, which is a modified form of the bivariate Gaussian distribution function. The proposed approach is more feasible than the conventional element-based damage detection method from the computational efficiency because it is independent on the number of divided elements. The micromechanical model is embedded in the reconstruction algorithm using the modified Halpin–Tsai formulation. The numerical examples show that the proposed technique is a feasible and practical method, which can prove the location of a damaged region as well as inspect the distribution of deteriorated stiffness of composites for different fiber angles and layup sequences.
ChoiSWKimYParkHS. Multi-objective seismic retrofit method for using FRP jackets in shear-critical reinforced concrete frames. Compos Part B: Eng2014; 56: 207–216.
2.
Williams WB, Michaels TE and Michaels JE. Estimation and application of 2-D scattering matrices for sparse array imaging of simulated damage in composite panels. In: AIP conference proceedings, 2017, vol. 1806, pp. 020014-1–020014-9.
3.
Qi X, Zhao X and Rose JL. Ultrasonic guided wave simulation toolbox development for damage detection in composites. In: AIP conference proceedings, 2009, vol. 1211, pp. 1095–1102.
4.
LucaADSharif-KhodaeiZAliabadiMHet al.Numerical simulation of the Lamb wave propagation in impacted CFRP laminate. Procedia Eng2016; 167: 109–115.
5.
Kim BH, Lee IK and Cho SJ. Estimation of existing prestress level on bonded strand using impact-echo test. In: 6th European workshop on structural health monitoring, Dresden, Germany, 2012.
6.
LeeSYWoohSC. Detection of stiffness reductions in laminated composite plates from their dynamic response using the microgenetic algorithm. Comput Mech2005; 36: 320–330.
7.
LeeSYRusGParkT. Detection of stiffness degradation in laminated composite plates by filtered noisy impact testing. Comput Mech2007; 41: 1–15.
8.
Sharif-KhodaeiZGhajariMAliabadiMH. Impact damage detection in composite plates using a self-diagnostic electro-mechanical impedance based structural health monitoring system. J Multiscale Model2015; 6: 1–20.
9.
ChandrashekharMGanguliR. Damage assessment of composite plate structures with material and measurement uncertainty. Mech Syst Signal Process2016; 75: 75–93.
10.
RusGLeeSYChangSYet al.Optimized damage detection of steel plates from noisy impact test. IJ Numer Meth Eng2006; 68: 707–727.
11.
TrungVDVinhHHHauDTet al.Damage detection in laminated composite plates using modal strain energy and improved differential evolution algorithm. Procedia Eng2016; 142: 182–189.
12.
RusGLeeSYGallegoR. Defect identification in laminated composite structures by BEM from incomplete static data. IJ Solids Struct2005; 42: 1743–1758.
13.
LeeSYParkTVoyiadjisGZ. Detection of stiffness reductions in concrete decks with arbitrary damage shapes using incomplete dynamic measurements. J Eng Mech ASCE2008, 134; pp. 567–577.
14.
ParkTNohMHLeeSYet al.Identification of a distribution of stiffness reduction in reinforced concrete slab bridges subjected to moving loads. J Bridge Eng ASCE2009; 14: 355–365.
15.
NohMHLeeSY. A bivariate Gaussian function approach for inverse cracks identification of forced-vibrating bridge decks. Inverse Prob Sci Eng2012; 21: 1047–1073.
16.
RusGLeeSY. Optimal reconstruction of the damage distribution in bridge decks by measuring the noisy response induced by traffic loads. KSCE J Civil Eng2015; 19: 1832–1844.
17.
Halpin JC and Tsai SW. Effects of environmental factors on composite materials. AFML-TR-67-423, 1969.
18.
ZuoZHHuangXRongJHet al.Multiscale design of composite materials and structures for maximum natural frequencies. Mater Des2013; 51: 1023–1034.
19.
HewittRLMalherbeMC. An approximation for the longitudinal shear modulus of continuous fiber composites. J Compos Mater1970, pp. 280–282.
20.
MatzenmillerALublinerJTaylorRL. Constitutive model for anisotropic damage in fiber-composites. Mech Mater1995; 20: 125–152.
21.
WangZXQiaoPXuJ. Vibration analysis of laminated composite plates with damage using the perturbation method. Compos Part B: Eng2015; 72: 160–174.
22.
LeeSYWoohSC. Waveform-based identification of structural damage using the combined FEM and microgenetic algorithms. J Struct Eng ASCE2005; 131: 1464–1472.
23.
MokaddemAAlamiMDoumiBet al.Prediction by a genetic algorithm of the fiber–matrix interface damage for composite material. Part 1. Study of shear damage in two composites T300/914 and PEEK/APC2. SOM2014; 46: 543–547.
WardCRattanawangcharoenNGheorghiuaC. Impact resonance method for damage detection in carbon-fibre-reinforced polymer–strengthened reinforced concrete beams subjected to fatigue and thermal cycling. Can J Civil Eng2008; 35: 1251–1260.
26.
LeeSYWoohSC. Finite element vibration analysis of composite box structures using the high order plate theory. J Sound Vib2004; 277: 801–814.
