Graphene-modified carbon/epoxy nanocomposites: Electrical,thermal and mechanical properties

Abstract

A primary limitation of fiber-reinforced polymer composites in aircraft applications is susceptibility to lightning because of poor electrical, thermal and electromagnetic properties. The current methods to mitigate the lightning strike in aircraft have added weight and reduced the performance. Previous graphene-modified epon 828 epoxy matrix study showed that three-roll dispersion is effective, repeatable and potentially scalable to disperse graphene in to epoxy to increase the electrical conductivity. Percolation threshold of graphene was found to be about 1.0 wt.% that enhanced electrical conductivity of epon 828 epoxy matrix from 4.3 × 10⁻¹⁵ to 2.6 × 10⁻⁶ S/m, thermal conductivity doubled and fracture toughness increased by one-third. In the present study, the same graphene/epon 828 is reinforced by carbon fabric by hand lay-up followed by compression molding. The resulting composite laminate was tested for electrical, thermal and mechanical properties and results of this nanocomposite laminates were compared with base composite laminate.

Keywords

Graphene electrical conductivity thermal conductivity mechanical properties

Get full access to this article

View all access options for this article.

References

Shivakumar

Swaminathan

Sharpe

. Carbon/vinyl ester composites for enhanced performance in marine applications. J Reinf Plast Compos 2006; 25: 1101–1116.

Shivakumar K and Panduranga R. Interleaved polymer matrix composites – a review. In: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 8–11, 2013, Boston, Massachusetts, USA, doi.org/10.2514/6.2013-1903.

Szatkowski GN, Dudley LK, Koppen SV, et al. Common practice lightning strike protection characterization technique to quantify damage mechanisms on composite substrates, https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20140002740.pdf (accessed 22 May 2018).

Lonjon

Demont

Dantras

et al.

Electrical conductivity improvement of aeronautical carbon fiber reinforced polyepoxy composites by insertion of carbon nanotubes. J Non Cryst Solids 2012; 358: 1859–1862.

Thostenson

Chou

. Processing-structure-multi-functional property relationship in carbon nanotube/epoxy composites. Carbon 2006; 44: 3022–3029.

Qin

Vautard

Drzal

et al.

Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber–matrix interphase. Compos Part B 2015; 69: 335–341.

Drzal

. Graphene nanoplatelet paper as a light-weight composite with excellent electrical and thermal conductivity and good gas barrier properties. Carbon 2012; 50: 1135–1145.

Kawakami H and Feraboli P. Lightning strike damage resistance and tolerance of scarf-repaired mesh-protected carbon fiber composites. Compos Part A 2011; 42: 1247–1262.

Scarpa

Peng

et al.

Design of a hybrid carbon fibre/carbon nanotube composite for enhanced lightning strike resistance. Aerosp Sci Technol 2015; 47: 367–377.

10.

Gagne

Therriault

. Lightning strike protection of composites. Prog Aerosp Sci 2014; 64: 1–16.

11.

Han

Zhang

Chen

et al.

The combination of carbon nanotube buckypaper and insulating adhesive for lightning strike protection of the carbon fiber/epoxy laminates. Carbon 2015; 94: 101 113.

12.

Gojny

Wichmann

MHG

Fiedler

et al.

Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites. Compos Part A 2005; 36: 1525–1535.

13.

Hossain

Imran

Hosur

et al.

Degradation of mechanical properties of conventional and nanophased carbon/epoxy composites in seawater. J Eng Mater Technol 2011; 133: 1–6.

14.

Hossain

Imran

Hosur et al.

Effect of seawater on thermal behavior of conventional and nanophased carbon/epoxy composite. Mater Res Soc Symp Proc 2011; 1298: 257–262.

15.

Hossain

Chowdhury

MMR

Imran

et al.

Effect of low velocity impact responses on durability of conventional and nanophased CFRP composites exposed to seawater. Polym Degrad Stab 2014; 99: 180–189.

16.

Imran

Lou

Shivakumar

. Enhancement of electrical and thermal conductivity of polypropylene by graphene nanoplatelets. J Appl Polym Sci 2018; 135: 1–11. DOI: 10.1002/APP.45833.

17.

Raza

Westwooda

AVK

Stirling

. Effect of processing technique on the transport and mechanical properties of graphite nanoplatelet/rubbery epoxy composites for thermal interface applications. Mater Chem Phys 2012; 132: 63–73.

18.

Drzal LT and Fukushima H. Exfoliated graphite nanoplatelets (xGnP): a carbon nanotube slternative. In: NSTI-Nanotech 2006, www.nsti.org, ISBN 0-9767985-6-5 vol. 1 (accessed 22 May 2018).

19.

Monti

Rallini

Puglia

et al.

Morphology and electrical properties of graphene–epoxy nanocomposites obtained by different solvent assisted processing methods. Compos Part A 2013; 46: 166–172.

20.

Wajid

Ahmed

HST

Das

et al.

High-Performance pristine graphene/epoxy composites with enhanced mechanical and electrical properties. Macromol Mater Eng 2013; 298: 339–347.

21.

Park

Dob

Askeland

et al.

Electrodeposition of exfoliated graphite nanoplatelets onto carbon fibers and properties of their epoxy composites. Compos Sci Technol 2008; 68: 1734–1741.

22.

Park

Louis

Cheng

et al.

Electromagnetic interference shielding properties of carbon nanotube buckypaper composites. Nanotechnology 2009; 20: 1–7.

23.

Imran KA and Shivakumar KN. Enhancement of electrical conductivity and assessment of thermal and mechanical properties of graphene/epoxy nanocomposites. In: ASC 30th technical conference, Michigan, 28–30 September 2015, paper no. 1530, Michigan State University.

24.

Imran

Shivakumar

. Enhancement of electrical conductivity of epoxy using graphene and determination of their thermo-mechanical properties. J Reinf Plast Compos 2018; 37: 118–133.

25.

Imran KA. Enhancement of electrical conductivity of carbon/epoxy composites by graphene and assessment of thermal and mechanical properties. PhD Thesis, North Carolina A&T State University, NC, USA, 2016.

26.

Daniel

Ishai

. Engineering mechanics of composite materials, 2nd ed. New York: Oxford University Press, 2006, pp. 337–339.

27.

Chen

Yao

. Conductivity of carbon fiber reinforced cement-based composites. Cem Concr Compos 2004; 26: 291–297.

28.

Kalogiannakis

Hemelrijck

Assche

. Measurements of thermal properties of carbon/epoxy and glass/epoxy using modulated temperature differential scanning calorimetry. J Compos Mater 2004; 38: 163–175.

29.

Doleman

Saad

. Thermal characterization of AS4/3501-6 carbon-epoxy composites. Front Heat Mass Transf 2013; 4: 1–8.

30.

Ulu FI. Measurement of multidirectional thermal conductivity of IM7-G/8552 unidirectional composite laminate. Master’s Thesis, North Carolina A&T State University, NC, USA, 2015.

31.

Cho

Chen

Daniel

. Mechanical enhancement of carbon fiber/epoxy composites by graphite nanoplatelet reinforcement. Script Mater 2007; 56: 685–688.

32.

Cho

Daniel

. Reinforcement of carbon/epoxy composites with multi-wall carbon nanotubes and dispersion enhancing block copolymers. Script Mater 2008; 58: 533–536.

33.

Yudhanto

Watanabe

Iwahori

et al.

Compression properties and damage mechanisms of stitched carbon/epoxy composites. Compos Sci Technol 2013; 86: 52–60.

34.

Gliesche

Hubner

Orawetz

. Investigations of in-plane shear properties of ±45-carbon/epoxy composites using tensile testing and optical deformation analysis. Compos Sci Technol 2005; 65: 163–171.

35.

Liang

Wang

. In-plane shear response of unidirectional fiber reinforced and fabric reinforced carbon/epoxy composites. Polym Test 2013; 32: 594–601.

36.

Fenner

Daniel

. Hybrid nanoreinforced carbon/epoxy composites for enhanced damage tolerance and fatigue life. Compos Part A 2014; 65: 47–56.

37.

Karnati SR. A mixed-mode (I-II) fracture criterion for AS4/8552 carbon/epoxy composite laminate. Master’s Thesis, North Carolina A&T State University, NC, USA, 2014.

38.

Kamar

Hossain

Khomenko

et al.

Interlaminar reinforcement of glass fiber/epoxy composites with graphene nanoplatelets. Compos Part A 2015; 70: 82–92.

39.

Hamer

Leibovich

Green

et al.

Mode I and Mode II fracture energy of MWCNT reinforced nanofibrilmats interleaved carbon/epoxy laminates. Compos Sci Technol 2014; 90: 48–56.