Experimental investigation of through-thickness resistivity of unidirectional carbon fiber tows

Abstract

In this study, the influence of type of carbon fiber, sizing amount on the fiber surface and the degree of compaction on the through-thickness electrical resistivity of dry unidirectional carbon fiber tows is investigated to validate the conduction pathways and mechanisms proposed by our previously reported micromechanics electrical resistivity model. An automated experimental setup has been developed and implemented, which measures the electrical resistivity and fiber volume fraction of carbon fiber tows under compression in real time. An extensive experimental study is conducted with five types of commercial PAN-based carbon fibers which vary in fiber diameter, number of fibers in a tow including two unsized fibers and three sized fibers with sizing amount of 0.25% and 1.0% by weight. The fiber volume fraction was increased by compacting the fiber tows using a mechanical testing system (Instron, Norwood, MA). The results show that the fiber sizing and fiber volume fraction impact the through-thickness electrical resistivity of carbon fiber tows. Sized fibers demonstrate 1–2 orders of magnitude higher electrical resistivity than the unsized fibers at lower fiber volume fractions (below 45%), while at higher fiber volume fraction (60%–70%), the electrical resistivity of the two fiber systems tends to be of similar magnitude. Fibers with more sizing (1 wt.%) demonstrated 10 times larger through-thickness resistivity than those with less sizing (0.25 wt.%), indicating the significant impact of fiber sizing on electrical resistivity. The results show good agreement with our micromechanics electrical resistivity model.

Keywords

Carbon fiber electrical conduction fiber volume fraction experimental

Get full access to this article

View all access options for this article.

References

Xue

Zhang

, et al. Monitoring the damage evolution of flexural fatigue in unidirectional carbon/carbon composites by electrical resistance change method. Int J Fatigue 2014; 68: 248–252.

Suzuki

Todoroki

Matsuzaki

, et al. Impact-damage visualization in CFRP by resistive heating: development of a new detection method for indentations caused by impact loads. Compos Part A Appl Sci Manuf 2012; 43: 53–64.

Abry Choi Chateauminois , et al. In-situ monitoring of damage in CFRP laminates by means of AC and DC measurement. Compos Sci Technol 2001; 61: 855–864.

Kwok

Hahn

. Resistance heating for self-healing composites. Journal of Composite Materials 2007; 41(13): 1635–1654.

Park JS, Takahashi K, Guo Z, Wang Y, Bolanos E, Hamann-Schaffner C, Murphy E, Wudl F, Hahn HT. Towards development of a self-healing composite using a mendable polymer and resistive heating. Journal of Composite Materials 2008; 42(26): 2869–2881.

Mehdlpour

Trueman

Sebak

, et al. Carbon-fiber composite T-match folded bow-tie antenna for RFID applications. IEEE Antennas Propag Soc AP-S Int Symp 2009; 2: 2–5.

Luo X, Chung DD. Electromagnetic interference shielding using continuous carbon-fiber carbon-matrix and polymer-matrix composites. Composites Part B: Engineering 1999; 30(3): 227–231.

Athanasopoulos N. A study on the effect of Joule-heating during the liquid composite molding (LCM) process and on the curing of CFRP composite laminates. In: 10th international conference on flow processes in composite, Monte Verit Ascona, CH, 11–15 July 2010 A.

Ashrafi M, Devasia S, Tuttle ME. Resistive embedded heating for homogeneous curing of adhesively bonded joints. International Journal of Adhesion and Adhesives 2015; 57: 34–39.

10.

Kawakami H. Lightning strike induced damage mechanisms of carbon fiber composites. PhD Dissertation, University of Washington, 2011.

11.

Wang

Chung

DDL

. Through-thickness piezoresistivity in a carbon fiber polymer-matrix structural composite for electrical-resistance-based through-thickness strain sensing. Carbon N Y 2013; 60: 129–138.

12.

Hussain

Choa

Niihara

. Fabrication process and electrical behavior of novel pressure-sensitive composites. Compos – Part A Appl Sci Manuf 2001; 32: 1689–1696.

13.

Louis

Joshi

Brockmann

. An experimental investigation of through-thickness electrical resistivity of CFRP laminates. Compos Sci Technol 2001; 61: 911–919.

14.

Athanasopoulos

Kostopoulos

. Prediction and experimental validation of the electrical conductivity of dry carbon fiber unidirectional layers. Compos Part B Eng 2011; 42: 1578–1587.

15.

Xia ZH and Curtin WA. Modeling of mechanical damage detection in CFRPs via electrical resistance. Composites Science and Technology 2007; 67(7–8): 1518–29.

16.

Heider

Advani

. A 3D microstructure based resistor network model for the electrical resistivity of unidirectional carbon composites. Compos Struct 2015; 134: 740–749.

17.

Gigliotti

Lafarie-Frenot

M-C

Grandidier

J-C

. Development of experimental and modelling tools for the characterisation of the thermo-electro-mechanical behaviour of composite materials for aircraft applications. Mécanique Ind 2011; 12: 87–101.

18.

Leong

Wang

Chung

DDL

. Effect of through-thickness compression on the microstructure of carbon fiber polymer-matrix composites, as studied by electrical resistance measurement. J Mater Sci 2006; 41: 2877–2884.

19.

Ramirez

Chung

DDL

. Electromechanical, self-sensing and viscoelastic behavior of carbon fiber tows. Carbon N Y 2016; 110: 8–16.

20.

Zantout A and Zhupanska OI. Electrical characterization of carbon fiber polymer matrix composites. In: Proceedings Of The ASME International Mechanical Engineering Congress And Exposition Advances In Aerospace Technology, 2010, pp. 75–84.

21.

Zantout

Zhupanska

. On the electrical resistance of carbon fiber polymer matrix composites. Compos Part A – Appl Sci Manuf 2010; 41: 1719–1727.

22.

Gutowski

TGG

Dillon

. The elastic deformation of lubricated carbon fiber bundles: comparison of theory and experiments. J Compos Mater 1992; 26: 2330–2347.

23.

Park

Hwang

Kim

, et al. Experimental and numerical study of the electrical anisotropy in unidirectional carbon-fiber-reinforced polymer composites. Smart Mater Struct 2007; 16: 57–66.

24.

Abry

Bochard

Chateauminois

, et al. In situ detection of damage in CFRP laminates by electrical resistance measurements. Compos Sci Tech 1999; 59: 925–935.

25.

Hirano

Yamane

Todoroki

. Through-thickness electric conductivity of toughened carbon-fibre-reinforced polymer laminates with resin-rich layers. Compos Sci Technol 2016; 122: 67–72.