The aim of the present study is to investigate the effect of SiC-graphite reinforcement on the properties of pure copper. Copper matrix composites with SiC-graphite reinforcement (0, 2.5,5, 7.5 and 10 wt.%) were prepared by stir casting process. Microstructure, phase, density, hardness and wear rate of prepared samples have been investigated. X-ray diffraction revealed that there is no intermediate phase formation between the reinforcement and matrix as a result of interfacial bonding between them. Microstructure study shows the uniform distribution of SiC-graphite particles in the Cu-matrix. Mechanical and corrosion properties of these Cu matrix MMCs were found to be dependent on the reinforcement content. Hardness was found to decrease with the addition of graphite due to its soft nature. Composite containing 5 wt.% reinforcement has shown minimum wear rate and maximum corrosion resistance. It is expected that the present composite will be useful for thermal management applications especially in heat exchangers.
GuptaPKumarDParkashOet al.Effect of sintering on wear characteristics of Fe-Al2O3 metal matrix composites. Proc Inst Mech Eng Part J: J Eng Tribol2014; 228: 362–368.
GuptaPKumarDParkashOMet al.Structural and mechanical behaviour of 5% Al2O3-reinforced Fe metal matrix composites (MMCs) produced by powder metallurgy (P/M) route. Bull Mater Sci2013; 36: 859–868.
4.
ChenBBiQYangJet al.Tribological properties of solid lubricants (graphite, h-BN) for Cu-based P/M friction composites. Tribol Int2008; 41: 1145–1152.
5.
ZhanYZhangG. The effect of interfacial modifying on the mechanical and wear properties of SiCp/Cu composites. Mater Lett2003; 57: 4583–4591.
6.
IbrahimIAMohamedFALaverniaEJ. Particulate reinforced metal matrix composites – a review. J Mater Sci1991; 26: 1137–1156.
7.
PetersPWHemptenmacherJSchurmannH. The fibre/matrix interface and its influence on mechanical and physical properties of Cu-MMC. Composi Sci Technol2010; 70: 1321–1329.
8.
ChenFYingJWangYet al.Effects of graphene content on the microstructure and properties of copper matrix composites. Carbon2016; 96: 836–842.
9.
PonrajNVAzhagurajanAVettivelSCet al.Study of processing and microstructure of copper composite reinforced with graphene nanosheet by powder metallurgy technique. Powder Metall Metal Ceram2018; 56: 523–534.
10.
XiaoYZhangZYaoPet al.Mechanical and tribological behaviors of copper metal matrix composites for brake pads used in high-speed trains. Tribol Int2018; 119: 585–592.
11.
SinghNMazumderRGuptaPet al.Ceramic matrix composites: processing techniques and recent advancements. J Mater Environ Sci2017; 8: 1654–1660.
12.
GuptaPKumarDParkashOet al.Tribo-evaluation of iron-based metal matrix nanocomposites for heavy duty applications. AIP Conf Proc2017; 1877: 030002–030002.
13.
Rajkumar K and Aravindan S. Mechanical, electrical, and tribological properties of copper–graphite composites. In: Kar KK (ed.) Composite Materials. Berlin, Heidelberg: Springer, 2017, pp.433–455.
14.
JhaPGuptaPKumarDet al.Synthesis and characterization of Fe–ZrO2 metal matrix composites. J Compos Mater2014; 48: 2107–2115.
15.
SinghNParkashOKumarD. Phase evolution, mechanical and corrosion behavior of Fe(100-x) Ni(x) alloys synthesized by powder metallurgy. J Phys Chem Solids2018; 114: 8–20.
16.
Singh N, Parkash O and Kumar D. Wear behavior of ZrO2 particle reinforced (Fe,Ni) matrix composite. In: 7th International conference on fracture, fatigue and wear, July 2018, pp.682–690. Singapore: Springer.
17.
AttarSNagaralMReddappaHet al.A review on particulate reinforced aluminium metal matrix composites. Int J Emerg Technol Innov Res2015; 2: 225–229.
18.
SijoMTJayadevanKR. Analysis of stir cast aluminium silicon carbide metal matrix composite: a comprehensive review. Proc Technol2016; 24: 379–385.
19.
KumarKRKiranKSreebalajiVS. Micro structural characteristics and mechanical behaviour of aluminium matrix composites reinforced with titanium carbide. J Alloys Comp2017; 723: 795–801.
20.
PoddarPGuptaSSahooKL. Magnesium-tin based composites processed through stir casting. J Metall Mater Sci2017; 59: 153–161.
21.
ZhanYZhangG. Friction and wear behavior of copper matrix composites reinforced with SiC and graphite particles. Tribol Lett2004; 17: 91–98.
22.
ZhanYZhangG. The role of graphite particles in the high-temperature wear of copper hybrid composites against steel. Mater Des2006; 27: 79–84.
23.
GuptaPKumarDParkashOet al.Dependence of wear behavior on sintering mechanism for iron-alumina metal matrix nanocomposites. J Mater Chem Phys2018; 220: 441–448.
24.
PonnammaDSadasivuniKKGrohensYet al.Carbon nanotube based elastomer composites – an approach towards multifunctional materials. J Mater Chem Phys C2014; 2: 8446–8485.
SinghNBanerjeeSParkashOet al.Tribological and corrosion behavior of (100-x)(Fe70Ni30)-(x)ZrO2composites synthesized by powder metallurgy. Mater Chem Phys2018; 205: 261–268.
