Effects of environmental exposures on carbon fiber epoxy composites protected by metallic thin films

Abstract

Carbon fiber epoxy composites have a wide range of applications in aerospace, construction, and automotive industries due to their good mechanical properties and lightweight characteristics. Carbon fiber epoxy composite structures are typically intended for service in corrosive and hostile environmental conditions. Therefore, development of coatings which are able to protect carbon fiber epoxy composite laminates against prolonged and harsh environmental conditions such as ultraviolet radiation and moisture deems critical. This paper offers a novel method for environmental protection of fiber-reinforced polymer composites by applying thin metallic films on composites' surface as coating materials. In order to investigate the protective properties of metallic thin films, copper and aluminum coatings were deposited on the surface of carbon fiber epoxy specimens by using direct current magnetron-sputtering technique, and then mechanical properties and surface morphology of specimens were monitored during the course of accelerated environmental exposure. Both metallic coatings showed good adhesion to carbon fiber epoxy samples during environmental aging and provided protection for the specimens' surface against environmental degradation. The correlation between flexural properties and surface morphology of carbon fiber epoxy specimens is also presented.

Keywords

UV radiation moisture environmental degradation carbon fiber epoxy metallic thin films

Get full access to this article

View all access options for this article.

References

Kumar

Singh

Nakamura

. Degradation of carbon fiber-reinforced epoxy composites by ultraviolet radiation and condensation. J Compos Mater 2002; 36: 2713–2733.

Loos

Springer

. Moisture absorption of graphite-epoxy composites immersed in liquids and in humid air volume. J Compos Mater 1979; 13: 131–147.

Wright

. The effect of diffusion of water into epoxy resins and their carbon-fibre reinforced composites. Compos Part A: Appl Sci Manuf 1981; 12: 201–205.

McKague

Reynolds

Halkias

. Swelling and glass transition relations for epoxy matrix material in humid environments. J Appl Polym Sci 1978; 22: 1643–1654.

Weitsman

Elahi

. Effects of fluids on the deformation, strength and durability of polymeric composites – an overview. Mech Time-Dependent Mater 2000; 4: 107–126.

Guo

Weitsman

. A correlation between fluid-induced damage and anomalous fluid sorption in polymeric composites. Compos Sci Tech 2002; 62: 889–908.

Hammami

Al-Ghuilani

. Durability and environmental degradation of glass-vinylester composites. Polym Compos 2004; 25: 609–616.

Ranby

Rabek

. Photodegradation, photo-oxidation and photostabilization of polymers, London: Wiley, 1975.

Yousif

Haddad

. Photodegradation and photostabilization of polymers, especially polystyrene: review, London, United Kingdom: Springer Plus, 2013, pp. 2 .

10.

Signor

Van Landingham

Chin

. Effects of ultraviolet radiation exposure on vinyl ester resins: characterization of chemical, physical and mechanical damage. Polym Degrad Stab 2003; 79: 359–368.

11.

Liau

Tseng

. The effect of long-term ultraviolet light irradiation on polymer matrix composites. Polym Compos 1998; 19: 440–445.

12.

Callister

Rethwisch

. Materials science and engineering – an introduction, London: Wiley, 2013, pp. 713.

13.

Afshar

Alkhader

Korach

, et al. Effect of long-term exposure to marine environments on the flexural properties of carbon fiber vinyl-ester composites. J Compos Struct 2015; 126: 72–77.

14.

Afshar

Liao

Chiang

, et al. Time-dependent changes in mechanical properties of carbon fiber vinyl ester composites exposed to marine environments. J Compos Struct 2016; 144: 80–85.

15.

Almeida

Diamantino

de Sousa

. Marine paints: the particular case of antifouling paints, physical and mechanical damage. Prog Organ Coat 2007; 59: 2–20.

16.

Davies

Evrard

. Accelerated ageing of polyurethanes for marine applications. Polym Degrad Stab 2007; 92: 1455–1464.

17.

Armelin

Oliver

Liesa

, et al. Marine paint formulations: conducting polymers as anti-corrosive additives. Prog Org Coat 2007; 59: 46–52.

18.

Afshar

. Synergistic effects of marine environments and flexural fatigue on carbon fiber–vinyl ester composites protected by gel coat. J Compos Mater 2017; 51: 3711–3717.

19.

Rezzoug

Abdi

Bouhelal

, et al. Metallic coating for carbon fiber reinforced polymer matrix composite substrate. Int J Chem Mol Nucl Mater Metal Eng 2016; 10: 59–64.

20.

Robitaille

Yandouzi

Hind

, et al. Metallic coating of aerospace carbon/epoxy composites by the pulsed gas dynamic spraying process. Surf Coat Technol 2009; 203: 2954–2960.

21.

Cadambi

Ghassemieh

. Hard coatings on elastomers for reduced permeability and increased wear resistance. Plast Rub Compos 2012; 41: 169–174.

22.

Leterrier

. Durability of nanosized oxygen-barrier coatings on polymers. Prog Mater Sci 2003; 48: 1–55.

23.

Chatham

. Oxygen diffusion barrier properties of transparent oxide coatings on polymeric substrates. Surf Coat Technol 1996; 78: 1–9.

24.

Mihut

Lozano

Tidrow

, et al. Electromagnetic interference shielding effectiveness of nanoreinforced polymer composites deposited with conductive metallic thin films. Thin Solid Films 2012; 520: 6547–6550.

25.

Han

Kim

. Electromagnetic interference shielding effectiveness of electroless Cu-plated PET fabrics. Synth Metal 2001; 123: 469–476.

26.

Chung

DDL

. Electromagnetic interference shielding effectiveness of carbon materials. Carbon 2001; 39: 279–285.

27.

Afshar

Mihut

Baqersad

, et al. Study of metallic thin films on epoxy matrix as protective barrier to ultraviolet radiation. Surf Coat Technol 2019; 367: 41–48.

28.

Lee

Hsu

Tuan

. Oxidation behavior of copper at a temperature below 300℃ and the methodology for passivation. Mater Res 2016; 19: 51–56.

29.

Krueger

Pollack

. The initial oxidation of aluminum thin films at room temperature. Surf Sci 1972; 30: 263–279.

30.

Beydon

Bernhart

Segui

. Measurement of metallic coatings adhesion to fibre reinforced plastic materials. Surf Coat Technol 2000; 126: 39–47.

31.

Tomita

Morioka

Iwasa

. Bending fatigue of long carbon fiber-reinforced epoxy composites. Mater Sci Eng 2001; A319–321: 679–682.

32.

Afshar

Mihut

Hill

, et al. Synergistic effects of environmental exposures on polymer matrix with or without metallic coating protection. J Compos Mater 2018; 52: 3773–3784.

33.

ASTM D790: 2017. Standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulating materials.

34.

ASTM G154: 2006. Standard practice for operating fluorescent light apparatus for UV exposure of nonmetallic materials.

35.

ASTM D7264: 2015. Standard test method for flexural properties of polymer matrix composite materials.