‘The micro/nano reinforced particle’ aluminum metal matrix composites (Al-MMCs) are widely used in manufacturing sector due to light-weight, superior strength-to-weight ratio, better fracture toughness, improved fatigue, and tensile property, enhanced corrosion resistance to harsh environment, etc. This article provides an overview of the manufacturing processes and different reinforcing elements used during the synthesis of Al-MMCs. Generally, the reinforced particles like carbides, nitrides, and compounds of oxides are used. Different organic, inorganic, industrial and agricultural waste which can be used for reinforcement in the aluminum matrix is highlighted with their feasible applications. The common mechanical properties (i.e. hardness, tensile and compressive strength, etc.) reported by different researchers are thoroughly discussed with the aim to highlight the amount of reinforcement and improvement occurred during processing. The formation and methodology for mixing condition and sintering behaviour of Al-MMCs are discussed to impart knowledge about the processing circumstances in powder metallurgical route. The affecting conditions during operating and responsible factor for the tribological behaviour are deliberated in a precise manner to recognize the potentiality of reinforcing particles in Al-MMCs. Finally, the different shortcomings and future prospects of the Al-MMCs are given to encourage the future research directions.
WuGZhangQChenG, et al.Properties of high reinforcement-content aluminum matrix composite for electronic packages. J Mater Sci Mater Electron2003; 14: 9–12.
13.
HashinZShtrikmanS. A variational approach to the theory of the elastic behaviour of multiphase materials. J Mech Phys Solids1963; 11: 127–140.
14.
PramodSLBakshiSRMurtyBS. Aluminum-based cast in situ composites: a review. J Mater Eng Perform2015; 24: 2185–2207.
15.
SinghJ. Fabrication characteristics and tribological behavior of Al/SiC/Gr hybrid aluminum matrix composites: a review. Friction2016; 4: 191–207.
16.
LloydDJ. Particle reinforced aluminium and magnesium matrix composites. Int Mater Rev1994; 39: 1–23.
17.
MistryJMGohilPP. An overview of diversified reinforcement on aluminum metal matrix composites: tribological aspects. Proc Inst Mech Eng Part J J Eng Tribol2017; 231: 399–421.
18.
HashmiJLooneyLHashmiMSJ. The prduction of metal matrix composites using the stir casting technique. J Mater Process Technol1999; 92–93: 1–7.
19.
CasatiRVedaniM. Metal matrix composites reinforced by nano-particles – a review. Metals2014; 4: 65–83.
20.
ShinJHChoiHJBaeDH. The structure and properties of 2024 aluminum composites reinforced with TiO2 nanoparticles. Mater Sci Eng A2014; 607: 605–610.
21.
RoyRAgrawalDChengJ, et al.Full sintering of powdered-metal bodies in a microwave field. Nature1999; 399: 668–670.
22.
MegahedMAttiaMAAbdelhameedM, et al.Tribological characterization of hybrid metal matrix composites processed by powder metallurgy. Acta Metall Sin2017; 30: 781–790.
23.
BhoiNKSinghHPratapS, et al.Microwave material processing: a clean, green and sustainable approach. Sustain Eng Prod Manuf Technol2019; 1: 3–23.
24.
ReddyMPUbaidFShakoorRA, et al.Microstructure and mechanical behavior of microwave sintered Cu50Ti50 amorphous alloy reinforced al metal matrix composites. JOM2018; 70: 817–822.
25.
LiangYNMaZYLiSZ, et al.Effect of particle size on wear behaviour of al-garnet composites. J Mater Sci Lett1995; 14: 114–116.
26.
KumarSPandeyRPanwarRS, et al.Effect of particle size on wear of particulate reinforced aluminum alloy composites at elevated temperatures. J Mater Eng Perform2013; 22: 3550–3560.
27.
MaXZhaoYFTianWJ, et al.A novel Al matrix composite reinforced by nano-AlNp network. Sci Rep2016; 6: 1–8.
28.
NamSChangKLeeW, et al.Structural effect of two-dimensional BNNS on grain growth suppressing behaviors in Al-matrix nanocomposites. Sci Rep2018; 8: 1–12.
29.
GuillonOGonzalez-JulianJDargatzB, et al.Field-assisted sintering technology/spark plasma sintering: mechanisms, materials, and technology developments. Adv Eng Mater2014; 16: 830–849.
30.
SinghHJainPKBhoiN, et al.Experimental study pertaining to microwave sintering (MWS) of Al-metal metrix composite – a review. Compos Mater Mater Eng2018; 928: 150–155.
31.
LuoPMcDonaldDTXuW, et al.A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing. Scripta Mater2012; 66: 785–788.
32.
Casati R. Aluminum matrix composites reinforced with alumina nanoparticles. (SpringerBriefs in applied sciences and technology). Springer international publisher, AG Switzerland 2016.
33.
Gupta RK, Murty BS and Birbilis NS. An overview of high-energy ball milled nanocrystalline aluminium alloys. (SpringerBriefs in materials). Springer international publisher, AG Switzerland, 2017.
34.
NawatheSWongWLEGuptaM. Using microwaves to synthesize pure aluminum and metastable Al/Cu nanocomposites with superior properties. J Mater Process Technol2009; 209: 4890–4895.
35.
LiCLiuXYiJ, et al.Effects of sintering parameters on the microstructure and mechanical properties of carbon nanotubes reinforced aluminum matrix composites. J Mater Res2016; 31: 3757–3765.
36.
HansenN. Strengthening of aluminium by three dimensional network of aluminum-oxide particles. Acta Metall1969; 17: 637–642.
37.
ReinertLGreenIGimmlerS, et al.Tribological behavior of self-lubricating carbon nanoparticle reinforced metal matrix composites. Wear2018; 408–409: 72–85.
38.
GhasaliEFaziliAAlizadehM, et al.Evaluation of microstructure and mechanical properties of Al-TiC metal matrix composite prepared by conventional, microwave and spark plasma sintering methods. Materials2017; 10: 1255–1255.
39.
AzarbarmasMEmamyMKaramouzM, et al.The effects of boron additions on the microstructure, hardness and tensile properties of in situ Al-15%Mg2Si composite. Mater Des2011; 32: 5049–5054.
40.
KhorshidiRHonarbakhsh RaoufAEmamyM, et al.The study of Li effect on the microstructure and tensile properties of cast Al-Mg2Si metal matrix composite. J Alloys Compd2011; 509: 9026–9033.
41.
NasiriNEmamyMMalekanA. Microstructural evolution and tensile properties of the in situ Al-15%Mg2Si composite with extra Si contents. Mater Des2012; 37: 215–222.
42.
EmamyMEmamiARTavighiK. The effect of Cu addition and solution heat treatment on the microstructure, hardness and tensile properties of Al–15 % Mg2Si-0.15%Li composite. Mater Sci Eng A2013; 576: 36–44.
43.
InegbeneborAOBoluCABabalolaPO, et al.Aluminum silicon carbide particulate metal matrix composite development via stir casting processing. Silicon2018; 10: 343–347.
44.
EmamyMEmamiARTavighiK. The effect of Cu addition and solution heat treatment on the microstructure, hardness and tensile properties of Al–15%Mg2Si–0.15%Li composite. Mater Sci Eng A2013; 576: 36–44.
45.
ZhangJWangYYangB, et al.Effects of Si content on the microstructure and tensile strength of an in situ Al-Mg2Si composite. J Mater Res1999; 14: 68–74.
46.
QinQDZhaoYGLiuC, et al.Strontium modification and formation of cubic primary Mg2Si crystals in Mg2Si/Al composite. J Alloys Compd2008; 454: 142–146.
47.
HadianREmamyMVarahramN, et al.The effect of Li on the tensile properties of cast Al-Mg2Si metal matrix composite. Mater Sci Eng A2008; 490: 250–257.
48.
RazaghianABahramiAEmamyM. The influence of Li on the tensile properties of extruded in situ Al-15%Mg2Si composite. Mater Sci Eng A2012; 532: 346–353.
49.
TjongSC. Novel nanoparticle-reinforced metal matrix composites with enhanced mechanical properties. Adv Eng Mater2007; 9: 639–652.
50.
DengCFWangDZZhangXX, et al.Processing and properties of carbon nanotubes reinforced aluminum composites. Mater Sci Eng A2007; 444: 138–145.
51.
EsawiAMKMorsiKSayedA, et al.Fabrication and properties of dispersed carbon nanotube-aluminum composites. Mater Sci Eng A2009; 508: 167–173.
52.
BakshiSRLahiriDAgarwalA. Carbon nanotube reinforced metal matrix composites – a review. Int Mater Rev2010; 55: 41–64.
53.
HousaerFBeclinFTouzinM, et al.Interfacial characterization in carbon nanotube reinforced aluminum matrix composites. Mater Charact2015; 110: 94–101.
54.
ZhangZLiuJWuT, et al.Effect of carbon nanotubes on friction and wear of a piston ring and cylinder liner system under dry and lubricated conditions. Friction2017; 5: 147–154.
55.
MajidMMajzoobiGHNoozadGA, et al.Fabrication and mechanical properties of MWCNTs-reinforced aluminum composites by hot extrusion. Rare Met2012; 31: 372–378.
56.
NieJJiaCShiN, et al.Aluminum matrix composites reinforced by molybdenum-coated carbon nanotubes. Int J Miner Metall Mater2011; 18: 695–702.
57.
RashadMPanFSTangAT, et al.Effect of graphene nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method. Prog Nat Sci Int2014; 24: 101–108.
58.
Perez-bustamanteRBolanos-moralesDBonilla-martinezJ, et al.Microstructural and hardness behavior of graphene-nanoplatelets/aluminum composites synthesized by mechanical alloying. J Alloys Compd2014; 615: 578–582.
59.
SharmaPSharmaSKumar GargR, et al.Effect of graphite content on mechanical properties and friction coefficient of reinforced aluminum composites. Powder Metall Met Ceram2017; 56: 264–272.
60.
DasariBLMorshedMNouriJM, et al.Mechanical properties of graphene oxide reinforced aluminium matrix composites. Compos Part B Eng2018; 145: 136–144.
61.
ChenFGuptaNBeheraRK, et al.Graphene-reinforced aluminum matrix composites: a review of synthesis methods and properties. JOM2018; 70: 837–845.
62.
MaTYamauraHKossDA, et al.Dry sliding wear behavior of cast sic-reinforced Al MMCs. Mater Sci Eng A2003; 360: 116–125.
63.
BasavarajappaSChandramohanGMukundK, et al.Dry sliding wear behavior of Al 2219/SiCp-Gr hybrid metal matrix composites. J Mater Eng Perform2006; 15: 668–674.
64.
NagaralMBharathVAuradiV. Effect of Al2O3 Particles on mechanical and wear properties of 6061Al alloy metal matrix composites. Mater Sci Eng2013; 2: 2–5.
65.
ShowBKMondalDKMaityJ. Dry sliding wear behavior of aluminum-based metal matrix composites with single (Al2O3) and hybrid (Al2O3 + SiC) reinforcements. Metallogr Microstruct Anal2014; 3: 11–29.
66.
LakshmipathyJKulendranB. Reciprocating wear behavior of 7075Al/SiC in comparison with. Int J Refract Hard Mater2014; 46: 137–144.
67.
Venkatesh D and Kumeresan G. Mechanical and tribological behaviour of hybrid (SiC & Al2O3) aluminium metal matrix composite. Silicon 2015; 1239–1244.
68.
VedrtnamAKumarA. Fabrication and wear characterization of silicon carbide and copper reinforced Aluminium matrix composite. Mater Discov2017; 9: 16–22.
69.
QuXWangFShiC, et al.In situ synthesis of a gamma-Al2O3 whisker reinforced aluminium matrix composite by cold pressing and sintering. Mater Sci Eng A2018; 709: 223–231.
70.
ReddyMPUbaidFShakoorRA, et al.Effect of reinforcement concentration on the properties of hot extruded Al-Al2O3 composites synthesized through microwave sintering process. Mater Sci Eng A2017; 696: 60–69.
71.
Venkata SivaSBGangulyRISrinivasa RaoG, et al.Quantitative studies on wear behavior of Al-(Al2O3-SiC-C) composite prepared with in situ ceramic composite developed from colliery waste. Proc Inst Mech Eng Part J J Eng Tribol2015; 229: 823–834.
72.
Sita Rama RajuKRama Murthy RajuPRajeshS, et al.An experimental and micrographical investigation on aluminum nano metal matrix composites. J Compos Mater2016; 50: 3627–3641.
73.
DongXShinYC. Multi-scale modeling of thermal conductivity of SiC-reinforced aluminum metal matrix composite. J Compos Mater2017; 51: 3941–3953.
74.
TangXCMengLYZhanJM, et al.Strengthening effects of encapsulating graphene in SiC particle-reinforced Al-matrix composites. Comput Mater Sci2018; 153: 275–281.
75.
AzadiMZolfaghariMRezanezhadS, et al.Effects of SiO2 nano-particles on tribological and mechanical properties of aluminum matrix composites by different dispersion methods. Appl Phys A Mater Sci Process2018; 124: 1–13.
76.
MohammedHReddyMPUbaidF, et al.Structural and mechanical properties of CeO2 reinforced Al matrix nanocomposites. Adv Mater Lett2018; 9: 602–605.
77.
MunchELauneyMEAlsemDH, et al.Tough, bio-inspired hybrid materials. Science2008; 322: 1516–1520.
78.
LiuJKhanUColemanJ, et al.Graphene oxide and graphene nanosheet reinforced aluminium matrix composites: powder synthesis and prepared composite characteristics. Mater Des2016; 94: 87–94.
79.
Shahid RN and Scudino S. Strengthening of Al-Fe3Al composites by the generation of harmonic structures. Sci Rep 2018; 1–12.
80.
MirandaATBolzoniLBarekarN, et al.Processing, structure and thermal conductivity correlation in carbon fibre reinforced aluminium metal matrix composites. Mater Des2018; 156: 329–339.
81.
ZhangZChenDL. Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites. Mater Sci Eng A2008; 483–484: 148–152.
82.
ZhangZChenDL. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength. Scripta Mater2006; 54: 1321–1326.
83.
LiCLMeiQSLiJY, et al.Hall-Petch relations and strengthening of Al-ZnO composites in view of grain size relative to interparticle spacing. Scripta Mater2018; 153: 27–30.
84.
Sanaty-ZadehA. Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall-Petch effect. Mater Sci Eng A2012; 531: 112–118.
85.
HuangS-JPengW-YVisicB, et al.Al alloy metal matrix composites reinforced by WS 2 inorganic nanomaterials. Mater Sci Eng A2018; 709: 290–300.
86.
WangZQuRTScudinoS, et al.Hybrid nanostructured aluminum alloy with super-high strength. NPG Asia Mater2015; 7: 1–8.
87.
ReddyMPShakoorRAParandeG, et al.Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques. Prog Nat Sci Mater Int2017; 27: 606–614.
88.
SridharINarayananKR. Processing and characterization of MWCNT reinforced aluminum matrix composites. J Mater Sci2009; 44: 1750–1756.
89.
Perez-BustamanteRGomez-EsparzaCDEstrada-GuelI, et al.Microstructural and mechanical characterization of Al-MWCNT composites produced by mechanical milling. Mater Sci Eng A2009; 502: 159–163.
90.
OzyurekDTekeliSGuralA, et al.Effect of al2o3 amount on microstructure and wear properties of Al–Al2O3 metal matrix composites prepared using mechanical alloying method. Powder Metall Met Ceram2010; 49: 289–294.
91.
MazaheryAShabaniMO. Mechanical properties of A356 matrix composites reinforced with nano-sic particles. Strength Mater2012; 44: 686–692.
92.
BorgohainCAcharyyaKSarmaS, et al.A new aluminum-based metal matrix composite reinforced with cobalt ferrite magnetic nanoparticle. J Mater Sci2013; 48: 162–171.
93.
AlamSNKumarL. Aluminium based metal matrix composites reinforced with graphite nanoplatelets. Mater Sci Eng A2016; 667: 16–32.
94.
DhanasekaranSSunilrajSRamyaG, et al.SiC and Al2O3 reinforced aluminum metal matrix composites for heavy vehicle clutch applications. Trans Indian Inst Met2016; 69: 699–703.
95.
RaeiMPanjepourMMeratianM. Effect of stirring speed and time on microstructure and mechanical properties of Cast Al–Ti–Zr–B4C composite produced by stir casting. Russ J Non-Ferrous Met2016; 57: 347–360.
96.
MatliPRFareehaUShakoorRA, et al.Fabrication and mechanical properties of extruded Al-SiC nanocomposites. Nano Hybrids Compos2017; 16: 9–12.
97.
LiMGaoHLiangJ, et al.Materials characterization microstructure evolution and properties of graphene nanoplatelets reinforced aluminum matrix composites. Mater Charact2018; 140: 172–178.
98.
MaheshSKakuYKumarA, et al.Effect of deformation on properties of Al/Al-alloy ZrB2 powder metallurgy composite. J Alloys Compd2018; 747: 666–675.
99.
Perez-BustamanteREstrada-GuelIAmezaga-MadridP, et al.Microstructural characterization of Al-MWCNT composites produced by mechanical milling and hot extrusion. J Alloys Compd2010; 495: 399–402.
100.
AbdizadehHAshuriMMoghadamPT, et al.Improvement in physical and mechanical properties of aluminum/zircon composites fabricated by powder metallurgy method. Mater Des2011; 32: 4417–4423.
101.
PadmavathiCUpadhyayaAAgrawalD. Effect of microwave and conventional heating on sintering behavior and properties of Al-Mg-Si-Cu alloy. Mater Chem Phys2011; 130: 449–457.
102.
LiuXLiCEckertJ, et al.Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites. Mater Charact2017; 133: 122–132.
103.
DwivediDK. Surface engineering enhancing life of tribological components, Berlin, Germany: Springer, 2018.
104.
Karl R, Prasad SV and Rohatgi PK. Self-lubricating aluminum metal-matrix composites. Patent 5,534,044, USA 1996.
105.
Straffelini G, Bonollo F, Molinari A, et al. Influence of matrix hardness on the dry sliding behaviour of 20 vol.% Al2O3-particulate-reinforced 6061A1 metal matrix composite. Wear 1997; 211: 192–197.
106.
DeshpandePKLinRY. Wear resistance of WC particle reinforced copper matrix composites and the effect of porosity. Mater Sci Eng A2006; 418: 137–145.
107.
KanayoKApataP. Corrosion and wear behaviour of rice husk ash-Alumina reinforced Al – Mg – Si alloy matrix hybrid composites. J Mater Res2013; 2: 188–194.
108.
García-RodríguezSTorresBMarotoA, et al.Dry sliding wear behavior of globular AZ91 magnesium alloy and AZ91/SiCp composites. Wear2017; 390–391: 1–10.
109.
PoriaSSahooPSutradharG. Tribological characterization of stir-cast aluminium-TiB2 metal matrix composites. Silicon2016; 8: 591–599.
110.
SinglaYKChhibberRBansalH, et al.Wear behavior of aluminum alloy 6061-based composites reinforced with SiC, Al2O3 and red mud: a comparative study. JOM2015; 67: 2160–2169.
111.
NisteVBRatoiMTanakaH, et al.Self-lubricating Al-WS2 composites for efficient and greener tribological parts. Sci Rep2017; 7: 1–14.
112.
ManoharanMGuptaM. Effect of heat treatment and interfacial characteristics on the work hardening behaviour of a SiC reinforced Aluminum metal matrix composites. J Compos Mater1997; 31: 1431–1441.
113.
RavukumarMReddappaHNSureshR. Study on mechanical and tribological characterization of Al2O3/SiCp reinforced aluminum metal matrix composite. Silicon2018; 10: 2535–2545.
114.
HariharasakthisudhanPJoseSManisekarK. Dry sliding wear behaviour of single and dual ceramic reinforcements premixed with Al powder in AA6061 matrix. J Mater Res Technol2019; 8: 275–283.
115.
ShorowordiKMLaouiTHaseebASMA, et al.Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study. J Mater Process Technol2003; 142: 738–743.
116.
MeijuanLKakaMLinJ, et al.Synthesis and mechanical behavior of nanostructured al 5083/n-TiB2 metal matrix composites. Mater Sci Eng A2016; 656: 241–248.
