Mechanical properties (impact, hardness and tensile strength) characterization of samples containing homogenous mixtures of Al 6063 matrix and varying amount of silver nanoparticles mixed with calcium carbonate at 2, 4, 6% weight fractions, respectively, produced by method of stir casting were carried out. Measurement of impact energy, hardness and tensile strength of the produced samples at 24℃ (ambient) temperature was done by Charpy impact, Brinell hardness and universal tensile testing machine in accordance to ASTM E23, E384 and E8/E8M-13M, respectively. The magnitude of impact and hardness increased evidently with increase in percentage weight fraction of the AgNPs. The refined samples were examined under an optical microscope. The fracture surfaces of the impact test samples were further examined by scanning electron microscopy. There is an increase in tensile strength, elongation and modulus of elasticity of Al-AgNP composites compared to as-cast aluminium alloy. The use of stir-casting technique influences the homogeneity and microstructure of the composites positively. It is concluded that Al-silver nanocomposites possess better qualities in hardness and strength and can replace conventional aluminium alloy in terms of performance and longer life in industrial application.
KalaiselvanKMuruganNSivaP. Production and characterization of AA6061−B4C stir cast composite. Mater Des2011; 32: 4004−4009.
3.
DaramolaOOAdediranAAFadumiyeAT. Evaluation of the mechanical properties and corrosion behaviour of coconut shell ash reinforced aluminium (6063) alloy composites. Leo Elect J Pract Tech2015; 27: 107–119.
4.
PitchayyapillaiGSeenikannanPBalasundarP, et al.Effect of nano-silver on microstructure, mechanical and tribological properties of cast 6061 aluminium alloy. Trans Nonferrous Met Soc China2017; 27: 2137–2145.
5.
ChenKHFangHCZhangZ, et al.Effect of Yb, Cr and Zr additions on recrystallization and corrosion resistance of Al−Zn−Mg−Cu alloys. Mater Sci Eng A2008; 497: 426−431.
6.
YiMZhi-HaoZJian-ZhongC. Effect of minor Zr and Sc on microstructures and mechanical properties of Al−Mg−Si−Cu−Cr−V alloys. Trans Nonferrous Met Soc China2013; 23: 1882−1889.
7.
IgbaiAANuruzzamaDM. Effect of reinforcement on the mechanical properties of aluminium matrix composites: review. Int J Appl Eng Res2016; 11: 10408–10413.
8.
AlkinRM. The mechanical properties of in-situ composites. JOM1997; 49: 35–39.
9.
AdediranAAAlanemeKKOladeleIO, et al.Processing and structural characterization of Si-based carbothermal derivatives of rice husk. Cogent Eng2018; 5: 1494499.
10.
EsawiAMKMorsiKSayedA, et al.Fabrication and Properties of Dispensed Carbon Nanotubes Aluminium Composites. Mater Sci Eng A2009; 508: 167–173. .
11.
CardosoKRRodriguesCADBottaWJ. Processing of Aluminium alloys Containing Titanium Addition by Mechanical Alloying. Mater Sci Eng A2004; 375–377: 1201–1205.
12.
AuldJH. Structure of metastable precipitate in some Al−Cu−Mg−Ag alloys. Mater Sci Technol1986; 2: 784−787.
13.
SongMChenKHuangL. Effects of Ag addition on mechanical properties and microstructures of Al−8Cu− 0.5Mg. alloy. Trans Nonferr Metals Soc China2006; 16: 766−771.
14.
LiLHuJYangW, et al.Band gap variation of size- and shape-controlled colloidal CdSe quantum rods. Nano Lett2001; 1: 349–351.
15.
SharmaVKYngardRALinY. Silver nanoparticles: green synthesis and their antimicrobial activities. Adv Colloid Interf2009; 145: 83–96.
16.
GurunathanSParkJHHanJW, et al.Comparative assessment of the apoptotic potential of silver nanoparticles synthesized by Bacillus tequilensis and Calocybe indica in MDA-MB-231 human breast cancer cells: targeting p53 for anticancer therapy. Int J Nanomed2015; 10: 4203–4222.
17.
GurunathanSKalishwaralalKVaidyanathanR, et al.Biosynthesis, purification and characterization of silver nanoparticles using Escherichia coli. Colloids Surf B Biointerf2009; 74: 328–335.
18.
LateefAOjoSAAzeezMA, et al.Cobweb as novel biomaterial for the green and eco-friendly synthesis of silver nanoparticles. Appl Nanosci2016; 6: 863–874.
19.
LiWRXieXBShiOS, et al.Antibacterial activity and mechanism of silver nanoparticles on Escherichia coli. Appl Microbiol Biotechnol2010; 85: 1115−1122.
20.
Alaneme KK and Ajayi OJ. Microstructure and mechanical behaviour of stir cast Zn-27Al based composites reinforced with rice husk ash, silicon carbide and graphite. Journal of King Saud University-Engineering 2017; 29: 172–177.
21.
ShabaniMOMazaheryA. Application of GA to optimize the process conditions of Al matrix nano-composites. Compos Part B2013; 45: 185−191.
22.
ShabaniMOMazaheryA. The performance of various artificial neurons interconnections in the modelling and experimental manufacturing of the composites. Mater Tehnol2012; 46: 109−113.
23.
MazaheryAShabaniMO. Microstructural and abrasive wear properties of SiC reinforced aluminum-based composite produced by compocasting. Trans Nonferr Metals Soc China2013; 23: 1905−1914.
24.
SelvakumarNNarayanasamyP. Optimization and effect of weight fraction of MoS2 on the tribological behaviour of Mg−TiC−MoS2 hybrid composites. Tribol Transac2016; 59: 733−747.
25.
RavindranPManisekarKNarayanasamyP, et al.Application of factorial techniques to study the wear behaviour of Al hybrid composites with graphite addition. Mater Des2012; 39: 42−54.
26.
Flore-Compos R, Deaquino-Lara R, Ponce A, et al. Composite of aluminium 7075 alloy with silver nano particles prepared by mechanical milling. In: 3rd international conference on multidisciplinary research, Saltillo, Coach, Mexico, 22–24 May 2009.
27.
LateefAOjoSAElegbedeJA. The emerging roles of arthropods and their metabolites in the green synthesis of metallic nanocomposites. Nanotechnol Rev2015; 5: 601–622.
28.
LateefAAkandeMAOjo SA, et al.Paper wasp nest-mediated biosynthesis of silver nanoparticles for antimicrobial, catalytic, anti-coagulant and thrombolytic applications. 3 Biotech2016; 6: 140.
29.
Nishida Y. Introduction to metal matrix composites: fabrication and recycling. Berlin, Germany: Springer Science & Business Media, 2013.
30.
RazzaqAMMajidDLIshakMR, et al.Effect of fly ash addition on the physical and mechanical properties of AA6063 alloy reinforcement. Metal2017; 7: 477.
31.
SrivastavaAKDasK. Microstructural and mechanical characterization of in situ TiC and (Ti, W) C-reinforced high manganese austenitic steel matrix composites. Mater Sci Eng A2009; 516: 1–6.
32.
Basak A, Pramanik A, Islam MN, et al. Challenges and recent developments on nanoparticle-reinforced metal matrix composites. In: Fillers and reinforcements for advanced nanocomposites. Amsterdam, The Netherlands: Elsevier Science & Technology, 2015, p. 349.
33.
HassanSBAigbodionVS. Effects of egg shell on the microstructures and properties of Al-Cu-Mg/ egg shell particulate composites. J King Saud Univ Eng Sci2015; 27: 49–56.
34.
AigbodionVSHassanSB. Effects of silicon carbide reinforcement on microstructure and properties of cast Al-Si-Fe/ SiC particulate composites. J Mater Sci Eng A2017; 447: 355–360.
35.
Aigbodion VS. Potential of using bagasse ash particle in metal matrix composite. Dissertation. Department of Metallurgical and Materials Engineering, Ahmadu Bello University, Samaru, Zaria, Nigeria, 2010, pp.34–50.
36.
RajanTPDPillaiRMPaiB, et al.Fabrication and characterization of Al–7Si–0.35Mg/fly ash metal matrix composites processed by different stir casting routes. Compos Sci Technol2007; 67: 3369–3377.
37.
Siva PrasadDRama KrishnaA. Production and mechanical properties of A356.2/RHA composites. Int J Adv Sci Technol2011; 33: 51–58.
38.
ShimpiNGVermaJMishraS. Dispersion of nano CaCO3 on PVC and its influence on mechanical and thermal properties. J Compos Mater2010; 44: 211–219.
39.
AbdolmohammadiSSiyamakSIbrahimNA, et al.Enhancement of mechanical and thermal properties of polycaprolactone/chitosan blend by calcium carbonate nanoparticles. Int J Mol Sci2013; 13: 4508–4522. .
40.
BaskaranRSarojadeviMVijayakumarCT. Mechanical and thermal properties of unsaturated polyester/calcium carbonate nanocomposites. J Reinf Plast Compos2011; 30: 1549–1556.
41.
FuadMYAHanimHZarinaR, et al.Polypropylene/calcium carbonate nanocomposites – effects of processing techniques and maleated polypropylene compatibiliser. eXPRESS Polym Lett2010; 4: 611–620.
42.
YangKYangQLiG, et al.Morphology and mechanical properties of polypropylene/calcium carbonate nanocomposites. Mater Lett2006; 60: 805–809.
43.
ZhangQXYuZZXieXL, et al.Crystallization and impact energy of polypropylene/CaCO3 nanocomposites with nonionic modifier. Polymer2004; 45: 5985–5994.
44.
ArhanAMulyatiMTMetusalachmM, et al.Physical and mechanical properties of agar based edible film with glycerol plasticizer. Int Food Res J2016; 23: 1669–1675.
