This paper presents an electromagnetic-mechanical repair patch (EMRP) to restore the mechanical and electromagnetic (EM) wave absorption performance of a radar-absorbing structure (RAS) damaged by lightning strike. Several researchers have primarily focused on ensuring high repair efficiency, particularly in terms of the primary load-bearing properties of repaired fiber-reinforced plastics. However, no study has proposed a practical repair approach that considers the multi-functionality of the radar-absorbing structure. The EMRP method can be used to repair lightning strike damage in a radar-absorbing structure with electroless nickel-plated glass fabric, considering the need to maintain structural integrity and electrical continuity to achieve a high repair efficiency. Damage due to an artificial lightning strike was assessed in terms of area and depth of the damage using image processing, ultrasonic C-scan, and micro X-ray inspection. The EM characteristics of one-dimensional return loss scanning and the echo radar-cross-section level were measured to verify the stealth performance of the repaired radar absorber in the X-band. In addition, the tensile test results demonstrated that the repaired radar absorber had a high recovery rate of 93% compared to the pristine radar absorber. The experimental results obtained in this study validate the use of the proposed EMRP method in repairing radar-absorbing structures.
GibsonRF.A review of recent research on mechanics of multifunctional composite materials and structures. Compos Struct2010;
92: 2793–2810.
2.
JangHKShinJHKimCG, et al.
Semi-cylindrical radar absorbing structures using fiber-reinforced composites and conducting polymers in the X-band. Adv Compos Mater2011;
20: 215–229.
3.
KowsariEMohammadiM.Synthesis of reduced and functional graphene oxide with magnetic ionic liquid and its application as an electromagnetic-absorbing coating. Compos Sci Technol2016;
126: 106–114.
4.
De RosaIMSarasiniFSartoMS, et al.
EMC impact of advanced carbon fiber/carbon nanotube reinforced composites for next-generation aerospace applications. IEEE Trans Electromagn Compat2008;
50: 556–563.
5.
De RosaIMMancinelliRSarasiniF, et al.
Electromagnetic design and realization of innovative fiber-reinforced broad-band absorbing screens. IEEE Trans Electromagn Compat2009;
51: 700–707.
6.
ShahAWangYHuangH, et al.
Microwave absorption and flexural properties of Fe nanoparticle/carbon fiber/epoxy resin composite plates. Compos Struct2015;
131: 1132–1141.
7.
FanZLuoGZhangZ, et al.
Electromagnetic and microwave absorbing properties of multi-walled carbon nanotubes/polymer composites. Mater Sci Eng B Solid-State Mater Adv Technol2006;
132: 85–89.
8.
ChoiWHShinJHSongTH, et al.
Design of circuit-analog (CA) absorber and application to the leading edge of a wing-shaped structure. IEEE Trans Electromagn Compat2014;
56: 599–607.
9.
ChoiWHShinJHSongTH, et al.
Design of thin circuit-analogue multilayer absorber and application to leading edge of wing structure. Electron Lett2013;
49: 216–217.
10.
KimJBByunJH.Salisbury screen absorbers of dielectric Lossy sheets of carbon nanocomposite laminates. IEEE Trans Electromagn Compat2012;
54: 37–42.
11.
ShinJHJangHKChoiWH, et al.
Design and verification of a single slab RAS through mass production of glass/MWNT added epoxy composite prepreg. J Appl Polym Sci2015;
132: 1–9.
12.
OhJHOhKSKimCG, et al.
Design of radar absorbing structures using glass/epoxy composite containing carbon black in X-band frequency ranges. Compos Part B Eng2004;
35: 49–56.
13.
RupkeE.Lightning direct effects handbook.
Pittsfield:
Lightning Technologies Inc., 2002.
LiYLiRLuL, et al.
Experimental study of damage characteristics of carbon woven fabric/epoxy laminates subjected to lightning strike. Compos Part A Appl Sci Manuf2015;
79: 164–175.
16.
WangYZhupanskaOI.Lightning strike thermal damage model for glass fiber reinforced polymer matrix composites and its application to wind turbine blades. Compos Struct2015;
132: 1182–1191.
17.
RichardsonMOWWisheartMJ.Review of low-velocity impact properties of composite materials. Compos Part A Appl Sci Manuf1996;
27: 1123–1131.
18.
FeraboliPMillerM.Damage resistance and tolerance of carbon/epoxy composite coupons subjected to simulated lightning strike. Compos Part A Appl Sci Manuf2009;
40: 954–967.
19.
HiranoYKatsumataSIwahoriY, et al.
Artificial lightning testing on graphite/epoxy composite laminate. Compos Part A Appl Sci Manuf2010;
41: 1461–1470.
20.
AbdelalGMurphyA.Nonlinear numerical modelling of lightning strike effect on composite panels with temperature dependent material properties. Compos Struct2014;
109: 268–278.
21.
OgasawaraTHiranoYYoshimuraA.Coupled thermal-electrical analysis for carbon fiber/epoxy composites exposed to simulated lightning current. Compos Part A Appl Sci Manuf2010;
41: 973–981.
22.
WangFSDingNLiuZQ, et al.
Ablation damage characteristic and residual strength prediction of carbon fiber/epoxy composite suffered from lightning strike. Compos Struct2014;
117: 222–233.
23.
JangJKHyunJMSonDS, et al.
Nondestructive and electromagnetic evaluations of stealth structures damaged by lightning strike. J Intell Mater Syst Struct2019;
30: 2567–2574.
24.
KawakamiHFeraboliP.lightning strike damage resistance and tolerance of scarf-repaired mesh-protected carbon fiber composites. Compos Part A2011;
42: 1247–1262.
25.
KatnamKBDa SilvaLFMYoungTM.Bonded repair of composite aircraft structures: a review of scientific challenges and opportunities. Prog Aerosp Sci2013;
61: 26–42.
26.
CamineroMAPavlopoulouSLopez-PedrosaM, et al.
Analysis of adhesively bonded repairs in composites: damage detection and prognosis. Compos Struct2013;
95: 500–517.
27.
Abdel WahabMM.Fatigue in adhesively bonded joints: a review. ISRN Mater Sci2012;
2012: 1–25.
28.
BudheSBaneaMDde BarrosS, et al.
An updated review of adhesively bonded joints in composite materials. Int J Adhes Adhes2017;
72: 30–42.
29.
BaneaMD, DSilvaLFM.Adhesively bonded joints in composite materials: an overview. Proc Inst Mech Eng Part L J Mater Des Appl2009;
223: 1–18.
30.
Harman AB and Wang CH. Improved design methods for scarf repairs to highly strained composite aircraft structure. Compos Struct 2006; 75: 132–144.
31.
CampilhoRde MouraMDominguesJJMS.Modelling single and double-lap repairs on composite materials. Compos Sci Technol2005;
65: 1948–1958.
32.
YooJTruongVParkM, et al.
Parametric study on static and fatigue strength recovery of scarf-patch-repaired composite laminates. Compos Struct2016;
140: 417–432.
33.
ArmstrongKBevanGColeW.Care and repair of advanced composites.
Warrendale, PA:
Social of Automotive Engineers (SAE), 2005.
34.
GuoXLiZNieH, et al.
Impact resistance and damage tolerance of scarf-repaired composite structures: an experimental investigation. Polym Compos2016;
37: 1681–1694.
35.
WhittinghamBBakerAAHarmanA, et al.
Micrographic studies on adhesively bonded scarf repairs to thick composite aircraft structure. Compos Part A Appl Sci Manuf2009;
40: 1419–1432.
36.
ShufengLXiaoquanCYunyanX, et al.
Study on impact performances of scarf-repaired carbon fiber reinforced polymer laminates. J Reinf Plast Comp2015;
34: 60–71.
37.
NamYWChoiJHLeeWJ, et al.
Fabrication of a thin and lightweight microwave absorber containing Ni-coated glass fibers by electroless plating. Compos Sci Technol2017;
145: 165–172.
38.
ChoiWHKwakBSKweonJH, et al.
Radar-absorbing foam-based sandwich composite with electroless nickel-plated glass fabric. Compos Struct2020;
243: 112252.
39.
NamYWChoiJHJangMS, et al.
Radar-absorbing structure with nickel-coated glass fabric and its application to a wing airfoil model. Compos Struct2017;
180: 507–512.
Aerospace recommended practice ARP 5412. Aircraft lightning environment and related test waveforms. Warrendale, PA: SAE, 1999.
42.
Aerospace recommended practice ARP 5414. Aircraft lightning environment and related test waveforms, SAE, 1999.
43.
D.o. Defense. Lightning qualification text techniques for aerospace vehicles and hardware, vol. MIL-STD-1757A., 1983.
44.
EunSWChoiWHJangHK, et al.
Effect of delamination on the electromagnetic wave absorbing performance of radar absorbing structures. Compos Sci Technol2015;
116: 18–25.
45.
NohY-HParkC-SKimK-J, et al.
Measurement method for monostatic radar cross section of a scaled aircraft model in non-anechoic environment. J Korean Inst Electromagn Eng Sci2019;
30: 583–590.
46.
ASTM D3039/D3039M-14. Standard test method for tensile properties of polymer matrix composite materials.
West Conshocken, PA:
ASTM International, 2014.
