Multifunctional carbon fiber-reinforced polymer (CFRP) composites are promising structural materials for lightweight applications. However, the low conductivity in the through-thickness direction of the composites limits its applications in the fields that require the high stability of composite against lightning strikes. This work presents the study on the synergetic effect of conducting polymer, polyaniline (PANI), and graphene nanoplatelets (GNP) for increasing the electrical conductivity of CFRP composites. PANI doped GNP flexible film is fabricated with the aid of compatible polymer polyvinylpyrrolidone (PVP), and its effect on the electrical conductivity of CFRP composites has been studied. About 250% in through-thickness conductivity has improved with 11 wt% GNP as a function of the composite. The incorporation of conductive film not only increases the conductivity of the CFRP laminates but also enhances the resistance against lightning strikes. Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA), three-point bending tests were used to analyze the morphology, thermal stability, and mechanical strengths of the composites. Finally, the observation of post-strike damage confirms the importance of through-thickness conductivity for mitigating the lightning strike damage.
KimP.A comparative study of the mechanical performance and cost of metal, FRP, and hybrid beams. Appl Compos Mater1998; 5: 175–187.
2.
CaiHArefAJ.On the design and optimization of hybrid carbon fiber reinforced polymer-steel cable system for cable-stayed bridges. Compos Part B: Eng2015; 68: 146–152.
SenisECGolosnoyIODulieu-BartonJM, et al. Enhancement of the electrical and thermal properties of unidirectional carbon fibre/epoxy laminates through the addition of graphene oxide. J Mater Sci2019; 54: 8955–8970.
5.
FeraboliPKawakamiH.Damage of carbon/epoxy composite plates subjected to mechanical impact and simulated lightning. J Aircr2010; 47: 999–1012.
6.
HiranoYKatsumataSIwahoriY, et al. Artificial lightning testing on graphite/epoxy composite laminate. Compos Part A: Appl Sci Manuf2010; 41: 1461–1470.
7.
DongQGuoYSunX, et al. Coupled electrical-thermal-pyrolytic analysis of carbon fiber/epoxy composites subjected to lightning strike. Polymer2015; 56: 385–394.
8.
KumarVYokozekiTOkadaT, et al. Effect of through-thickness electrical conductivity of CFRPs on lightning strike damages. Compos Part A: Appl Sci Manuf2018; 114: 429–438.
9.
GhavamianAMaghamiMRDehghanS, et al. Concerns of corrosive effects with respect to lightning protection systems. Eng Fail Anal2015; 57: 434–443.
10.
RajeshPSiroisFTherriaultD.Damage response of composites coated with conducting materials subjected to emulated lightning strikes. Mater Des2018; 139: 45–55.
11.
BazelyanEMRaizerYP.Lightning physics and lightning protection. Boca Raton: CRC Press, 2000.
12.
InamFWongDWKuwataM, et al. Multiscale hybrid micro-nanocomposites based on carbon nanotubes and carbon fibers. J Nanomater2010; 2010: 1–12.
13.
YokozekiTIwahoriYIshiwataS.Matrix cracking behaviors in carbon fiber/epoxy laminates filled with cup-stacked carbon nanotubes (CSCNTs). Compos Part A: Appl Sci Manuf2007; 38: 917–924.
14.
GojnyFHWichmannMHFiedlerB, et al. Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites. Compos Part A: Appl Sci Manuf2005; 36: 1525–1535.
15.
MishraKBabuLKDhakalD, et al. The effect of solvent on the mechanical properties of polyhedral oligomeric silsesquioxane (POSS)–epoxy nanocomposites. SN Appl Sci2019; 1: 1–7.
16.
WangSDownesRYoungC, et al. Carbon fiber/carbon nanotube buckypaper interply hybrid composites: manufacturing process and tensile properties. Adv Eng Mater2015; 17: 1442–1453.
17.
RibeiroBBotelhoECCostaML, et al. Carbon nanotube buckypaper reinforced polymer composites: a review. Polímeros2017; 27: 247–255.
18.
KumarVSharmaSPathakA, et al. Interleaved MWCNT buckypaper between CFRP laminates to improve through-thickness electrical conductivity and reducing lightning strike damage. Compos Struct2019; 210: 581–589.
19.
QinWVautardFDrzalLT, et al. Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber–matrix interphase. Compos Part B: Eng2015; 69: 335–341.
20.
Zhang Y, Jiang Z, Small J, et al. Landau-level splitting in graphene in high magnetic fields. Physical review letters 2006; 96: 136806.
21.
AsmatuluRKhanWSReddyRJ, et al. Synthesis and analysis of injection‐molded nanocomposites of recycled high‐density polyethylene incorporated with graphene nanoflakes. Polym Compos2015; 36: 1565–1573.
22.
DeanCRYoungAFMericI, et al. Boron nitride substrates for high-quality graphene electronics. Nature Nanotech2010; 5: 722–726.
23.
XieSLiuYLiJ.Comparison of the effective conductivity between composites reinforced by graphene nanosheets and carbon nanotubes. Appl Phys Lett2008; 92: 243121.
24.
ComptonOCNguyenST.Graphene oxide, highly reduced graphene oxide, and graphene: versatile building blocks for carbon‐based materials. Small2010; 6: 711–723.
25.
DikinDAStankovichSZimneyEJ, et al. Preparation and characterization of graphene oxide paper. Nature2007; 448: 457–460.
26.
InzeltG.Conducting polymers: a new era in electrochemistry. Berlin: Springer Science & Business Media, 2012.
27.
LuJMoonK-SKimB-K, et al. High dielectric constant polyaniline/epoxy composites via in situ polymerization for embedded capacitor applications. Polymer2007; 48: 1510–1516.
28.
SilvaM. J dSanchesAOMalmongeLF, et al. Electrical, mechanical, and thermal analysis of natural rubber/polyaniline-Dbsa composite. Mat Res2014; 17: 59–63.
29.
Del Castillo-CastroTCastillo-OrtegaMHerrera-FrancoP.Electrical, mechanical and piezo-resistive behavior of a polyaniline/poly (n-butyl methacrylate) composite. Compos Part A: Appl Sci Manuf2009; 40: 1573–1579.
30.
PathakAKKumarVSharmaS, et al. Improved thermomechanical and electrical properties of reduced graphene oxide reinforced polyaniline–dodecylbenzenesulfonic acid/divinylbenzene nanocomposites. J Colloid Interface Sci2019; 533: 548–560.
31.
KumarVYokozekiTGotoT, et al. Mechanical and electrical properties of PANI-based conductive thermosetting composites. J Reinf Plast Compos2015; 34: 1298–1305.
32.
KatuninAKrukiewiczKTurczynR, et al. Synthesis and characterization of the electrically conductive polymeric composite for lightning strike protection of aircraft structures. Compos Struct2017; 159: 773–783.
33.
KumarVYokozekiTGotoT, et al. Synthesis and characterization of PANI-DBSA/DVB composite using roll-milled PANI-DBSA complex. Polymer2016; 86: 129–137.
34.
HiranoYYokozekiTIshidaY, et al. Lightning damage suppression in a carbon fiber-reinforced polymer with a polyaniline-based conductive thermoset matrix. Compos Sci Technol2016; 127: 1–7.
35.
DhakalDRLamichhanePMishraK, et al. Influence of graphene reinforcement in conductive polymer: synthesis and characterization. Polym Adv Technol2019; 30: 2172–2182.
36.
WajidASDasSIrinF, et al. Polymer-stabilized graphene dispersions at high concentrations in organic solvents for composite production. Carbon2012; 50: 526–534.
37.
WeiWLuWYangQ-h.High-concentration graphene aqueous suspension and a membrane self-assembled at the liquid–air interface. Carbon2011; 49: 2879.
38.
ChoJChenJDanielIM.Mechanical enhancement of carbon fiber/epoxy composites by graphite nanoplatelet reinforcement. Scr Mater2007; 56: 685–688.
39.
YavariFRafieeMRafieeJ, et al. Dramatic increase in fatigue life in hierarchical graphene composites. ACS Appl Mater Interfaces2010; 2: 2738–2743.
40.
ZhangXFanXYanC, et al. Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide. ACS Appl Mater Interfaces2012; 4: 1543–1552.
41.
GoekeAEmmelmannC.Influence of laser cutting parameters on CFRP part quality. Phys Procedia2010; 5: 253–258.
42.
KumarVYokozekiTGotoT, et al. Scavenging phenomenon and improved electrical and mechanical properties of polyaniline–divinylbenzene composite in presence of MWCNT. Int J Mech Mater Des2018; 14: 697–708.
