In this study on characterization of bambusa vulgaris fibers from Cameroon (BV), we evaluated the linear density as well as the moisture uptake. With the help of SEM, the cross-sections were observed to be circular shapes; they increase from outside to inside in any transverse position along the stem. Also, the degradation temperature of BV was investigated with the aid of TGA and the result showed that the degradation temperature of BV fibers is between 366 °C and 380 °C. In addition, their Young's moduli in dynamic tensile test was determined and it was noticed that the Young moduli increase from inside to outside. The bending tests of BV fibers were carried out and enable the various parameters in zone 3/3. Finally, the creep behavior of BV fibers was studied and it was revealed that the 4-element Burger model describes very well this phenomenon and could help in well predicting fatigue behaviour of BV fibers reinforced composites.
KoshyKCJeeG.Studies on the absence of seed set in Bambusa vulgaris. Curr Sci2001;
81: 375–378.
2.
LinXHuangLFangW. Bamboo regeneration via embryogenesis and organogenesis. In: Ken-Ichi S (ed) Embryogenesis. Rijeka: INTECH, 2012, pp.359–372.
3.
AtawodiSEOlowoniyiODAdejoGO, et al.
Review of the antioxidant potential of African medicinal and food plants. Plants Source Natural Antioxid2014;
34: 34–47.
4.
ZakikhaniPZahariRSultanMTH, et al.
Extraction and preparation of bamboo fibre-reinforced composites. Mat Design2014;
63: 820–828.
5.
MirmehdiSTonoliGHDHeinPRG.The effects of bamboo species and adhesive type on mechanical properties of laminated bamboo lumber (LBL).
Lavras, Brazil:
Universidade Federal De Lavras, 2016.
6.
RazaliNSapuanSMJawaidM, et al.
Mechanical and thermal properties of Roselle fibre reinforced vinyl ester composites. BioResources2016;
11: 9325–9339.
7.
ChokshiSParmarVGohilP, et al.
Chemical composition and mechanical properties of natural fibers. J Nat Fibers. Epub ahead of print 3 December 2020. DOI: 10.1080/15440478.2020.1848738.
8.
KozłowskiRMMuzyczekM.Natural fibers: properties, mechanical behavior, functionalization and applications. 2017, pp.1–393. New York: NOVA.
9.
ShrivastavaR.Structural evaluation of a bamboo arch. Doctoral dissertation, UC Irvine, USA, 2015.
10.
PuranA.Study on growth of bamboo and intercrops under bamboo based silvipasture system. Doctoral dissertation, Birsa Agricultural University, Kanke, Ranchi, Jharkhand, 2015.
11.
JainSKumarRJindalUC.Mechanical behaviour of bamboo and bamboo composite. J Mater Sci1992;
27: 4598–4604.
12.
LiYXuHL.Comparison of serviceability of the bamboo fiber fabric and the ramie fabric. J Text Res2006;
27: 79.
13.
Do ThiVV.Matériaux composites à fibres naturelles/polymère biodégradables ou non. Doctoral dissertation, Université de Grenoble, Université des Sciences Naturelles d’Ho Chi Minh Ville, France, 2011.
14.
JohnMJThomasS.Biofibres and biocomposites. Carb Poly2008;
71: 343–364.
15.
WangFLiXZhangJ, et al.
Micromechanical modelling of the progressive failure in unidirectional composites reinforced with bamboo fibres. Mech Mat2016;
94: 180–192.
16.
YangXLiuXShangL, et al.
Variation of tensile properties of single fibres of dendrocalamus farinosus bamboo. BioResources2016;
11: 1609–1619.
17.
WongSShanksR.Creep behaviour of biopolymers and modified flax fibre composites. Compos Interfaces2008;
15: 131–145.
18.
GottronJHarriesKAXuQ.Creep behaviour of bamboo. Constr Build Mater2014;
66: 79–88.
19.
NiHLiYFuS.Morphological structure and properties of bamboo shell fiber. J Nat Fibers2018;
15: 586–595.
20.
HuMWangCLuC, et al.
Investigation on the classified extraction of the bamboo fiber and its properties. J Nat Fibers. Epub ahead of print 17 April 2019. DOI: 10.1080/15440478.2019.1599311.
21.
FelisbertoMHFBeraldoALCostaMS, et al.
Bambusa vulgaris starch: characterization and technological properties. Food Res Int2020;
132: 109102.
22.
ZhouAHuangDLiH, et al.
Hybrid approach to determine the mechanical parameters of fibers and matrixes of bamboo. Constr. Build. Mat2012;
35: 191–196.
23.
MarasiganOSRazalRAAliponMA.Effect of thermal treatment on the wettability of giant bamboo (Dendrocalamus asper) and kawayan tinik (Bambusa blumeana) in the Philippines. J. Tropical Forest Sci2020;
32: 369–378.
24.
MichelD. Evaluation du potential fibreux et textile de la canne à sucre (Saccharum officinarum L.). Doctoral dissertation, Université de Haute Alsace, Mulhouse, France, 2013.
25.
HuiskenMPHarzallahOTagneNS, et al.
Physical and mechanical characterization of several varieties of oil palm mesocarp fibers using different cross-sectional assumptions. J Nat Fibers. 2021; 18: 175–191.
26.
de QueirozRSda SilvaAPVdaLBroegaAC, et al.
New Brazilian pineapple leaf fibers for textile application: cottonization and dyeing performance. SN Appl Sci2020;
2: 72.
27.
DansoH.Properties of coconut, oil palm and bagasse fibres: as potential building materials. Procedia Eng2017;
200: 1–9.
28.
Tagne Nicodème RodrigueSEbénézerNDieunedortN, et al.
Investigation of the physical and mechanical properties of Raffia vinifera fibers along the stem. J Nat Fibers2017;
14: 621–633.
29.
HegdeDVBhavanishankarMCKariyappaGG, et al.
Studies on physical properties of wine palm and roselle natural fibers. J Nat Fibers2019;
16: 1166–1176.
30.
KumarNDasD.Alkali treatment on nettle fibers part II: design of experiment and desirability function approach to study enhancement of tensile properties. J Text Inst2017;
108: 1468–1475.
31.
MichelDBachelierBDreanJY, et al.
Preparation of cellulosic fibers from sugarcane for textile use. Conference Papers Science2013;
2013: 1–6.
32.
SikameTNRNdapeuDNkemajaD, et al.
Study of the viscoelastic behaviour of the raffia vinifera fibres. Ind Crops Products2018;
124: 572–581.
33.
WuQLeeONCaiZ, et al.
Creep behavior of borate-treated strandboard: effect of zinc borate retention, wood species, and load level. Maderas, Cienc Tecnol2009;
11: 19–32.
34.
HearleJWMortonWE.Physical properties of textile fibres.
Amsterdam:
Elsevier, 2008.
35.
XuYLeeSYWuQ.Creep analysis of bamboo high‐density polyethylene composites: effect of interfacial treatment and fiber loading level. Polym Compos2011;
32: 692–699.
36.
XuYWuQLeiY, et al.
Creep behavior of bagasse fiber reinforced polymer composites. Bioresource Technol2010;
101: 3280–3286.
37.
YangJLZhangZSchlarbAK, et al.
On the characterization of tensile creep resistance of polyamide 66 nanocomposites. Part II: modeling and prediction of long-term performance. Polymer2006;
47: 6745–6758.
38.
SanaRMounirJSlahM.Study of structure and properties of Tunisian typha leaf fibers. Int J Eng Res Tech (IJERT)2014;
3: 539–546.
39.
LiuLWangQChengL, et al.
Modification of natural bamboo fibers for textile applications. Fibers Polym2011;
12: 95–103.
40.
RowellRM. Natural fibres: types and properties. In: Kim LP (ed) Properties and performance of natural-fibre composites. Sawston: Woodhead publishing, 2008, pp.3–66.
41.
ZakikhaniPZahariRSultanM, et al.
Morphological, mechanical, and physical properties of four bamboo species. BioResources2017;
12: 2479–2495.
42.
ArthanarieswaranVPKumaravelASaravanakumarSS.Characterization of new natural cellulosic fiber from acacia leucophloea bark. Int J Polym Anal and Char2015;
20: 367–376.
43.
SenthamaraikannanPSanjayMRBhatKS, et al.
Characterization of natural cellulosic fiber from bark of albizia amara. J Nat Fibers2019;
16: 1124–1131.
44.
BouaskerMBelayachiNHoxhaD, et al.
Physical characterization of natural straw fibers as aggregates for construction materials applications. Materials2014;
7: 3034–3048.
45.
AchourAGhomariFBelayachiN.Properties of cementitious mortars reinforced with natural fibers. J Ad Sci Tech2017;
31: 1938–1962.
46.
PrithivirajMMuralikannanRSenthamaraikannanP, et al.
Characterization of new natural cellulosic fiber from the Perotis indica plant. Int J Poly Ana Charact2016;
21: 669–674.
47.
NishidaMTanakaTMikiT, et al.
Multi-scale instrumental analyses for structural changes in steam-treated bamboo using a combination of several solid-state NMR methods. Ind Crops Prod2017;
103: 89–98.
48.
AkinyemiABOmoniyiETOnuzulikeG.Effect of microwave assisted alkali pretreatment and other pretreatment methods on some properties of bamboo fibre reinforced cement composites. Constr Build Mater2020;
245: 118405.
49.
MomohEOOsoferoAIMartinez-FelipeA, et al.
Physico-mechanical behaviour of oil palm broom fibres (OPBF) as eco-friendly building material. J Build Eng2020;
30: 101208.
50.
Boguslavsky A, Barkhuysen F, et al. Establishing of Agave Americana industry in South Africa. In: 5th International Conference on New Crops, Southampton, September 2007, pp 1–17.
51.
TallaPKFometheAFogueM, et al.
Time-temperature equivalency of Raphia vinifera L.(arecaceae) under compression. Int J Mech Sol2010;
5: 27–33.
52.
StarkovaOBuschhornSTMannovE, et al.
Creep and recovery of epoxy/MWCNT nanocomposites. Compos Part A: Appl Sci Manufact2012;
43: 1212–1218.
