Multiwalled carbon nanotubes (MWCNTs) were incorporated in EPDM matrix in an internal mixer. Characterization of the prepared MWCNTs/EPDM composites using RAMAN spectroscopy reveals a minor deterioration of the CNTs’ structure, in terms of intensities ratio of D and G bands (ID/IG ratio), probably due to the intensive mixing conditions of internal mixer. The thermal stability of MWCNTs/EPDM composites was improved, as it was observed by thermogravimetric analysis (TGA) results, whereas the glass transition temperature (Tg) remained almost unaffected. In addition, MWCNTs/EPDM composites showed significant improvement in their modulus of elasticity and a decrease in swelling after immersion in benzene, in comparison with the pristine elastomer. The study of dielectric properties for MWCNT’s/EPDM nanocomposites determined the percolation threshold between 2 and 3 phr MWCNTs content. Enhancement in electromagnetic interference (EMI) shielding effectiveness of MWCNTs/EPDM composites was also recorded by the increase of filler content in the elastomeric matrix, with the reflectance being the main shielding mechanism. A slight increase in thermal diffusivity and conductivity was observed at EPDM composites with low MWCNTs content (1–5 phr) which became more significant at higher loads (8 & 10 phr).
KimJ-HKimG-H. Effect of orientation and content of carbon based fillers on thermal conductivity of ethylene-propylene-diene/filler composites. J Appl Polym Sci2014; 131. DOI: 10.1002/app.41000.
2.
IqbalSSIqbalNJamilT, et al.Tailoring in thermomechanical properties of ethylene propylene diene monomer elastomer with silane functionalized multiwalled carbon nanotubes. J Appl Polym Sci2016; 133(12): 43221.
3.
HoikkanenMPoikelispääMDasA, et al.Evaluation of mechanical and dynamic mechanical properties of multiwalled carbon nanotube-based ethylene–propylene copolymer composites mixed by masterbatch dilution. J Compos Mater2016; 50(29): 4093–4101.
4.
Hasanzadeh KermaniHMottaghitalabVMokhtaryM, et al.Morphological, rheological, and mechanical properties of ethylene propylene diene monomer/carboxylated styrenebutadiene rubber/multiwall carbon nanotube nanocomposites. International Journal of Polymer Analysis and Characterization2020; 25: 479–498.
5.
Jha*NMahapatraSP. Morphology, barrier, mechanical and electrical conductivity properties of oil-extended EPDM/MWCNT nanocomposites. Int J Eng Adv Technol2019; 8: 4116–4121.
6.
GuoMLiJWangY. Effects of carbon nanotubes on char structure and heat transfer in ethylene propylene diene monomer composites at high temperature. Compos Sci Technol2021; 211: 108852.
7.
GuoMLiJXiK, et al.Effect of multi-walled carbon nanotubes on thermal stability and ablation properties of EPDM insulation materials for solid rocket motors. Acta Astronaut2019; 159: 508–516.
8.
SchönhalsAKremerF. Analysis of dielectric spectra. In: KremerFSchönhalsA (eds). Broadband dielectric spectroscopy. 1st ed.. New York: Springer, 2003, pp. 59–98.
9.
ParkerWJJenkinsRJButlerCP, et al.Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity. J Appl Phys1961; 32: 1679–1684.
10.
CowanRD. Pulse method of measuring thermal diffusivity at high temperatures. J Appl Phys1963; 34: 926–927.
11.
JahedMNaderiGHamid Reza GhoreishyM. Microstructure, mechanical, and rheological properties of natural rubber/ethylene propylene diene monomer nanocomposites reinforced by multi-wall carbon nanotubes. Polym Compos2016; 39: E745–E753.
12.
PolgarLMCriscitielloFVan EssenM, et al.Thermoreversibly cross-linked EPM rubber nanocomposites with carbon nanotubes. Nanomaterials2018; 8(2): 58. DOI: 10.3390/nano8020058.
13.
Khademeh MolaviFSoltaniSNaderiG, et al.Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber. Polyolefins J2016; 3(2): 69–77.
14.
OsswaldSHavelMGogotsiY. Monitoring oxidation of multiwalled carbon nanotubes by Raman spectroscopy. J Raman Spectrosc2007; 38(6): 728–736.
15.
WangXDouW. Preparation of graphite oxide (GO) and the thermal stability of silicone rubber/GO nanocomposites. Thermochim Acta2012; 529: 25–28.
16.
KuesterSDemarquetteNRFerreiraJC, et al.Hybrid nanocomposites of thermoplastic elastomer and carbon nanoadditives for electromagnetic shielding. Eur Polym J2017; 88: 328–339.
17.
YangCWuY. High-performance silicone rubber composites via non-covalent functionalization of carbon nanotubes. Journal of Macromolecular Science Part B2017; 56: 790–799.
18.
Marín-GenescàMMujal-RosasRGarcia AmorosJ, et al.Study analysis of thermal, dielectric, and functional characteristics of an ethylene polyethylene diene monomer blended with end-of-life tire microparticles amounts. Polymers2021; 13: 509. DOI: 10.3390/polym13040509.
19.
RalliniMPuriITorreL, et al.Thermal and ablation properties of EPDM based heat shielding materials modified with density reducer fillers. Composites Part A: Applied Science and Manufacturing2018; 112: 71–80.
20.
YangPHeMRenX, et al.Effect of carbon nanotube on space charge suppression in PP/EPDM/CNT nanocomposites. J Polym Res2020; 27(5): 132. DOI: 10.1007/s10965-020-02107-3.
21.
GoudarziLIzadi-VasafiHNikfarN. Investigation of the morphological and mechanical properties of polyethylene terephthalate (PET)/Ethylene propylene diene rubber (EPDM) blends in the presence of multi-walled carbon nanotubes. Journal of Macromolecular Science Part B2018; 57: 585–594.
22.
XiKLiJWangY, et al.Thermal insulation and char layer mechanical properties of a novel ethylene propylene diene monomer composite reinforced with carbon nanotubes coated via chemical vapour deposition. Compos Sci Technol2021; 201: 108537.
23.
NavidfarAPekerMIBudakE, et al.Carbon quantum dots enhanced graphene/carbon nanotubes polyurethane hybrid nanocomposites. Composites Part B: Engineering2022; 247: 110310.
24.
NavidfarABulutOBaytakT, et al.Boosted viscoelastic and dynamic mechanical behavior of binary nanocarbon based polyurethane hybrid nanocomposite foams. J Compos Mater2022; 56: 2907–2920.
25.
ParanSMRNaderiGBabakhaniA. An experimental study of the effect of CNTs on the mechanical properties of CNTs/NR/EPDM nanocomposite. Polym Compos2018; 39(11): 4071–4079.
26.
HarishABWriggersPJungkJ, et al.Mesoscale constitutive modeling of non-crystallizing filled elastomers. Comput Mech2016; 57: 653–677.
27.
WangZLiuJWuS, et al.Novel percolation phenomena and mechanism of strengthening elastomers by nanofillers. Phys Chem Chem Phys2010; 12: 3014–3030.
28.
JhaNSarkhelGMahapatraSP. Morphology, barrier and electrical properties of oil-extended EPDM/nanographite nanocomposites. Materials Today: Proceedings2021; 45: 3850–3856.
29.
SahooBPNaskarKTripathyDK. Conductive carbon black-filled ethylene acrylic elastomer vulcanizates: physico-mechanical, thermal, and electrical properties. J Mater Sci2012; 47(5): 2421–2433.
30.
JhaNSarkhelGMahapatraSP. Morphology, barrier and electrical properties of oil-extended EPDM/nanographite nanocomposites. Materials Today: Proceedings2021; 45: 3850–3856.
31.
NavidfarATrabzonL. Fabrication and characterization of polyurethane hybrid nanocomposites: me chanical, thermal, acoustic and dielectric properties. Emergent Mater2022; 5: 1157–1165.
HanZFinaA. Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review. Prog Polym Sci2011; 36: 914–944.
34.
KlonosPAPeoglosVBikiarisDN, et al.Rigid amorphous fraction and thermal diffusivity in nanocomposites based on poly(l-lactic acid) filled with carbon nanotubes and graphene oxide. J Phys Chem C2020; 124: 5469–5479.
