Recycled carbon fibers (rCF) represent an inexpensive alternative to virgin carbon fibers (CF) but the mechanical improvement brought by rCF to polymer composites is noticeably lower than that from CF. In this article we evaluate two methods of coating rCF by single walled carbon nanotubes (SWCNTs), wet and dry, and demonstrate that extremely low concentrations of SWCNTs, ∼0.03%, are sufficient to measurably improve the strength (by 16%), modulus (by 38%), and Izod impact strength (by 52%) of thermoplastic crystalline polyamide polyxylylene adipamide (MXD6) with 30% rCF. The dry method with grinding of rCF and SWCNTs works better than the wet (dip coating) method and the rCF with residual epoxy is better than purified by pyrolysis rCF. We link this improvement of the mechanical properties to the enhanced crystallization rate caused by SWCNTs, which is observed in differential scanning calorimetry (DSC).
BledzkiAKSeidlitzHKrenzJ, et al.Recycling of carbon fiber reinforced composite polymers-review-Part 2: recovery and application of recycled carbon fibers. Polymers2020; 12: 3003.
2.
ColomboBGaiardelliPDottiS, et al.Recycling technologies for fibre-reinforced plastic composite materials: a bibliometric analysis using a systematic approach. J Compos Mater2022; 56: 3063–3080.
3.
PickeringSJ. Recycling technologies for thermoset composite materials-current status. Composites Part A: Applied Science and Manufacturing2006; 37: 1206–1215.
4.
ChenTMansfieldCDJuL, et al.The influence of mechanical recycling on the properties of thermotropic liquid crystalline polymer and long glass fiber reinforced polypropylene. Compos. Part B: Eng2020; 200: 108316.
5.
LonganaMLTapperRJBlokLG, et al.Recycling of fiber reinforced thermosetting composites. In: Fiber reinforced composites. London, UK: Woodhead Publishing, 2021, pp. 561–595.
6.
SchwarzSHöftbergerTBurgstallerC, et al.Pyrolytic recycling of carbon fibers from prepregs and their use in polyamide composites. Open J Compos Mater2020; 10: 92–105.
7.
IsaANosbiNChe IsmailM, et al.A review on recycling of carbon fibres: methods to reinforce and expected fibre composite degradations. Materials2022; 15: 4991.
8.
GrzankaR. The greening of carbon fibre. Reinforced Plastics2014; 58: 44–46.
9.
van de WerkenNReeseMSTahaMR, et al.Investigating the effects of fiber surface treatment and alignment on mechanical properties of recycled carbon fiber composites. Composites Part A: Applied Science and Manufacturing2019; 119: 38–47.
10.
MorinCLoppinet-SeraniACansellF, et al.Near- and supercritical solvolysis of carbon fibre reinforced polymers (CFRPs) for recycling carbon fibers as a valuable resource: state of the art. The Journal of Supercritical Fluids2012; 66: 232–240.
11.
TapperRJLonganaMLNortonA, et al.An evaluation of life cycle assessment and its application to the closed-loop recycling of carbon fibre reinforced polymers. Compos. - B: Eng2022; 184: 107665.
12.
SongYSYounJRGutowskiTG. Life cycle energy analysis of fiber-reinforced composites. Composites Part A: Applied Science and Manufacturing2009; 40: 1257–1265.
13.
HowarthJMareddySSRMativengaPT. Energy intensity and environmental analysis of mechanical recycling of carbon fibre composite. Journal of Cleaner Production2014; 81: 46–50.
14.
PakdelEKashiSVarleyR, et al.Recent progress in recycling carbon fibre reinforced composites and dry carbon fibre wastes. Resources, Conservation and Recycling2021; 166: 105340.
15.
BernatasRDagreouSDespax-FerreresA, et al. Recycling of fiber reinforced composites with a focus on thermoplastic composites. Cleaner Engineering and Technology2021; 5: 100272.
RahmanianSTheanKSSurayaAR, et al.Carbon and glass hierarchical fibers: influence of carbon nanotubes on tensile, flexural and impact properties of short fiber reinforced composites. Materials & Design2013; 43: 10–16.
18.
SalasAMedinaCVialJT, et al. Ultrafast carbon nanotubes growth on recycled carbon fibers and their evaluation on interfacial shear strength in reinforced composites. Scientific Reports2021; 11: 5000.
19.
IslamMHAfrojSUddinMA, et al. Graphene and CNT‐based smart fiber‐reinforced composites: a review. Adv Func Mater2022; 32: 2205723.
20.
PredtechenskiyMRKhasinAABezrodnyAE, et al.New perspectives in SWCNT applications: tuball SWCNTs. Part 1. Tuball by itself-All you need to know about it. Carbon Trends2022; 8: 100175.
21.
PredtechenskiyMRKhasinAASmirnovSN, et al.New perspectives in SWCNT applications: tuball SWCNTs. Part 2. New composite materials through augmentation with Tuball. Carbon Trends2022; 8: 100176.
