Dual influence of graphene oxide/clay and electron beam radiation on the structure,mechanical,thermal,and antimicrobial properties of nitrile butadiene rubber nanocomposite
Restricted accessResearch articleFirst published online September, 2024
Dual influence of graphene oxide/clay and electron beam radiation on the structure,mechanical,thermal,and antimicrobial properties of nitrile butadiene rubber nanocomposite
Infective diseases are becoming more popular, and managing them has become a great worry for humanity. A rubber nanocomposite based on nitrile butadiene rubber with graphene oxide (NBR/GO) and GO/nanoclay (montmorillonite, MMT) (NBR/GO/MMT) was fabricated by a simple technique, roll milling. The synergistic influence of the existence of GO, clay, and electron beam (EB)-radiation on the NBR nanocomposites was characterized using scanning electron microscopy (SEM), and Fourier-transform infrared (FT–IR) techniques to study the mechanical, thermal, and antibacterial properties. The antibacterial activity of the prepared rubber nanocomposites was estimated via the disk diffusion process against Gram-positive bacteria, Bacillus subtilis, Staphylococcus lentus, and Gram-negative bacteria; Pseudomonas aeruginosa and Proteus mirabilis. The results demonstrated that the physico-mechanical performance was significantly reinforced by incorporating nano GO (6 phr) and clay with GO (3 phr/6 phr. NBR films have no antibacterial potential. GO increases the antibacterial efficiency of the NBR films. NBR/3% GO/3% clay film is the most effective in reducing bacterial growth and B. subtilis was the most sensitive bacteria for rubber treatments. The inhibition zone diameters of the un-irradiated and irradiated NBR/3% GO/3% clay films for B. subtilis were 18.03 ± 0.59 and 25.63 ± 0.98 mm, respectively. It could be concluded that because of its outstanding flexibility and human-body compatibility penetration, rubber in corporation with antimicrobial agents can be utilized for manufacturing medical and environmental products.
AsifM. Review on antimicrobial agents. Organic & Medicinal Chemistry International Journal2018; 1: 555573. DOI: 10.19080/omcij.2017.01.555573.
3.
ZahranMMareiAH. Innovative natural polymer metal nanocomposites and their antimicrobial activity. Int J Biol Macromol2019; 136: 586–596. DOI: 10.1016/j.ijbiomac.2019.06.114.
4.
MouradREl MogySADarweshO, et al. In-vitro evaluation of antimicrobial and anti-inflammatory efficacy of the gelatin-β-cyclodextrin hydrogels as biodegradable carriers for rutin. ChemistrySelect. 2024; 9: e202303705. doi:10.1002/slct.202303705.
5.
El MogySAMouradRMAbdel-HakimA. Characterization of biodegradable composite based on microalgae modified glycerol-plasticized-starch films. Polym Eng Sci2023; 64: 1168–1180. DOI: 10.1002/pen.26605.
6.
SethulekshmiASJayanJSSarithaA, et al.Antimicrobial studies in rubber nanocomposites—a mini review. Ind Crops Prod2022; 187: 115374. DOI: 10.1016/j.indcrop.2022.115374.
7.
LinharesFNKerschMSousaAMF, et al.Influence of binary curing system on the nitrile rubber mechanical properties. Macromol Symp2016; 367: 55–62. DOI: 10.1002/masy.201500133.
8.
MoonYLeeHJungJ, et al.Direct visualization of carbon black aggregates in nitrile butadiene rubber by THz near-field microscope. Sci Rep2023; 13: 7846. https://pubmed.ncbi.nlm.nih.gov/37188716
9.
BazliLBarghamadiMShafieeS, et al. Investigation of rheological, mechanical, and thermal properties of nanocomposites based on nitrile rubber-phenolic resin reinforced with nanographene. J Appl Polym Sci. 2021; 138: 50906. doi:10.1002/app.50906.
10.
LiuMZhangQYinC, et al.Preparation, morphology, and properties of organo-montmorillonite/nitrile butadiene rubber nanocomposites. Polym Compos2013; 34: 1809–1815. DOI: 10.1002/pc.22585.
11.
SureshJNAriefINaskarK, et al.The role of chemical microstructures and compositions on the actuation performance of dielectric elastomers: a materials research perspective. Nano Select2023; 4: 289–315. DOI: 10.1002/nano.202200254.
12.
TolooeiSNaderiGShokoohiS, et al.Elastomer nanocomposites based on NBR/BR/nanoclay: morphology and mechanical properties. J Polym Eng2013; 33: 133–139. DOI: 10.1515/polyeng-2012-0143.
13.
OhDHKimHSShimJH, et al.Characteristics of gel time and dielectric strength of epoxy composite according to the mixing ratio of micro-fillers. Energies2020; 13: 5165. DOI: 10.3390/en13195165.
14.
LiuCCuiJZhangZ, et al.The role of TBM asymmetric tail-grouting on surface settlement in coarse-grained soils of urban area: field tests and FEA modelling. Tunn Undergr Space Technol2021; 111: 103857. DOI: 10.1016/j.tust.2021.103857.
15.
JavedMQamarMAIqbalS, et al. Synergistic influences of doping techniques and well-defined heterointerface formation to improve the photocatalytic ability of the S-ZnO/GO nanocomposite. ChemistrySelect. 2022; 7: e202201913. doi:10.1002/slct.202201913.
16.
ChuLKanMJerramsS, et al.Constructing chemical interface layers by using ionic liquid in graphene oxide/rubber composites to achieve high-wear resistance in environmental-friendly green tires. ACS Appl Mater Interfaces2022; 14: 5995–6004. DOI: 10.1021/acsami.1c21605.
17.
CuiJZhaoJWangS, et al.A comparative study on enhancement of mechanical and tribological properties of nitrile rubber composites reinforced by different functionalized graphene sheets: molecular dynamics simulations. Polym Compos2020; 42: 205–219. DOI: 10.1002/pc.25819.
18.
MannRMitsidisDXieZ, et al.Antibacterial activity of reduced graphene oxide. J Nanomater2021; 2021: 1–10. DOI: 10.1155/2021/9941577.
19.
ZhangCKhorshidiHNajafiE, et al.Fresh, mechanical and microstructural properties of alkali-activated composites incorporating nanomaterials: a comprehensive review. J Clean Prod2023; 384: 135390. DOI: 10.1016/j.jclepro.2022.135390.
20.
JiangHXieYZhuR, et al.Construction of polyphosphazene-functionalized Ti3C2TX with high efficient flame retardancy for epoxy and its synergetic mechanisms. Chem Eng J2023; 456: 141049. DOI: 10.1016/j.cej.2022.141049.
21.
SuYShenZLongX, et al.Gaussian filtering method of evaluating the elastic/elasto-plastic properties of sintered nanocomposites with quasi-continuous volume distribution. Mater Sci Eng2023; 872: 145001. DOI: 10.1016/j.msea.2023.145001.
22.
WilkJSmuszRFilipR, et al.Experimental investigations on graphene oxide/rubber composite thermal conductivity. Sci Rep2020; 10: 15533. https://pubmed.ncbi.nlm.nih.gov/32968202
HorueMCacicedoMLFernandezMA, et al.Antimicrobial activities of bacterial cellulose – silver montmorillonite nanocomposites for wound healing. Mater Sci Eng C2020; 116: 111152. DOI: 10.1016/j.msec.2020.111152.
25.
AliZEl-NemrKYoussefH, et al.Mechanical and physicochemical properties of electron beam irradiated rubber/clay nanocomposites. Polym Compos2013; 34: 1600–1610. DOI: 10.1002/pc.22560.
26.
BahoussiSMouleferaIBelmokhtarA, et al.Novel hybrid materials based on montmorillonite-modified reinforced p-phenylenediamine: synthesis, characterization and their optical, electrochemical and thermal properties. J Mol Struct2021; 1243: 130866. DOI: 10.1016/j.molstruc.2021.130866.
27.
SukthawonCDittanetPSaeouiP, et al.Electron beam irradiation crosslinked chitosan/natural rubber -latex film: preparation and characterization. Radiat Phys Chem2020; 177: 109159. DOI: 10.1016/j.radphyschem.2020.109159.
28.
EyssaHMElnaggarMYZakyMM. Impact of graphene oxide nanoparticles and carbon black on the gamma radiation sensitization of acrylonitrile–butadiene rubber seal materials. Polym Eng Sci2021; 61: 2843–2860. DOI: 10.1002/pen.25804.
ChaudhariCVBhardwajYKPatilND, et al.Radiation-induced vulcanisation of natural rubber latex in presence of styrene-butadiene rubber latex. Radiat Phys Chem2005; 72: 613–618. DOI: 10.1016/j.radphyschem.2004.03.012.
31.
EyssaHMEl MogySAYoussefHA. Impact of foaming agent and nanoparticle fillers on the properties of irradiated rubber. Radiochim Acta2021; 109: 127–142. DOI: 10.1515/ract-2020-0015.
32.
El MogySALawandySN. Enhancement of the cure behavior and mechanical properties of nanoclay reinforced NR/SBR vulcanizates based on waste tire rubber. J Thermoplast Compos Mater2023; 37: 520–543. DOI: 10.1177/08927057231180493.
33.
EyssaHMAfifiMMoustafaH. Improvement of the acoustic and mechanical properties of sponge ethylene propylene diene rubber/carbon nanotube composites crosslinked by subsequent sulfur and electron beam irradiation. Polym Int2023; 72(1): 87–98.
34.
MousaaIMAbdelreheimNAElnaggarSA, et al.Green synthesis and use of copper oxide nanoparticles to prepare a highly thermal, antimicrobial, and anticorrosion hybrid coating for mild steel under electron beam irradiation. Anti-corrosion Methods & Mater2022; 69: 160–170. DOI: 10.1108/acmm-11-2021-2566.
35.
DharmarajMMChakrabortyBCBegumS. The effect of graphene and nanoclay on properties of nitrile rubber/polyvinyl chloride blend with a potential approach in shock and vibration damping applications. Iran Polym J (Engl Ed)2022; 31: 1129–1145. DOI: 10.1007/s13726-022-01064-6.
36.
ETMaDYangS, et al.Graphene oxide-montmorillonite/sodium alginate aerogel beads for selective adsorption of methylene blue in wastewater. J Alloys Compd2020; 832: 154833. DOI: 10.1016/j.jallcom.2020.154833.
37.
RostampourASharifMMoujiN. Synergetic effects of graphene oxide and clay on the microstructure and properties of HIPS/graphene oxide/clay nanocomposites. Polym Plast Technol Eng2016; 56: 171–183. DOI: 10.1080/03602559.2016.1185626.
38.
QianWZhangWWuS, et al.In situ X-ray imaging and numerical modeling of damage accumulation in C/SiC composites at temperatures up to 1200°C. J Mater Sci Technol2024; 197: 65–77. DOI: 10.1016/j.jmst.2024.01.069.
39.
ElhamoulySHMasoudMAKandilAM. Influences of accelerators on the properties of nitrile butadiene rubber and attenuated total reflectance (ATR)-Fourier transform infrared (FTIR) investigation. Mod Appl Sci. 2010; 4(4): 47–61. doi:10.5539/mas.v4n4p47.
40.
EyssaHMMohamedWSEl-ZayatMM. Irradiated rubber composite with nano and micro fillers for mining rock application. Radiochim Acta2019; 107: 737–753. DOI: 10.1515/ract-2018-2989.
41.
DurmuşAWooMKaşgözA, et al.Intercalated linear low density polyethylene (LLDPE)/clay nanocomposites prepared with oxidized polyethylene as a new type compatibilizer: structural, mechanical and barrier properties. Eur Polym J2007; 43: 3737–3749. DOI: 10.1016/j.eurpolymj.2007.06.019.
42.
TanJChengHWeiL, et al.Using low-rank coal slime as an eco-friendly replacement for carbon black filler in styrene butadiene rubber. J Clean Prod2019; 234: 949–960. DOI: 10.1016/j.jclepro.2019.06.221.
43.
EyssaHMSawiresSGSennaMM. Gamma irradiation of polyethylene nanocomposites for food packaging applications against stored-product insect pests. J Vinyl Addit Technol. 2018; 25: E120-129. doi:10.1002/vnl.21660.
44.
RamanathanTAbdalaAAStankovichS, et al.Functionalized graphene sheets for polymer nanocomposites. Nat Nanotechnol2008; 3: 327–331. DOI: 10.1038/nnano.2008.96.
45.
RafieeMARafieeJSrivastavaI, et al.Fracture and fatigue in graphene nanocomposites. Small2010; 6: 179–183. DOI: 10.1002/smll.200901480.
46.
PuriCSumanaG. Highly effective adsorption of crystal violet dye from contaminated water using graphene oxide intercalated montmorillonite nanocomposite. Appl Clay Sci2018; 166: 102–112. DOI: 10.1016/j.clay.2018.09.012.
47.
AmmarLFakhfakhS. Optical and dielectric properties of polypropylene/montmorillonite nanocomposites. Funct Compos Struct2020; 2: 045003. DOI: 10.1088/2631-6331/abcc42.
48.
YangXTangHLiY, et al.Synthesis, characterization, and thermal pyrolysis mechanism of high temperature resistant phenolphthalein-based poly (arylene ether nitrile). Polym Degrad Stabil2024; 224: 110754. DOI: 10.1016/j.polymdegradstab.2024.110754.
49.
AnDChenHHeR, et al.MOF decorated boron nitride/natural rubber composites with heterostructure for thermal management application through dual passive cooling modes base on the improved thermal conductivity and water sorption-desorption process. Compos Sci Technol2024; 248: 110469. DOI: 10.1016/j.compscitech.2024.110469.
50.
ZhangWKangSLiuX, et al.Experimental study of a composite beam externally bonded with a carbon fiber-reinforced plastic plate. J Build Eng2023; 71: 106522. DOI: 10.1016/j.jobe.2023.106522.
51.
YuwawechKWootthikanokkhanJ. EVA film reinforced with acid functionalized graphene nanoplatelets as a transparent barrier layer to enhance the durability of solar cells. Int J Automot Mech Eng2019; 16: 6301–6318. DOI: 10.15282/ijame.16.1.2019.15.0477.
52.
YusohKKumaranSVIsmailFS. Surface modification of nanoclay for the synthesis of polycaprolactone (PCL) – clay nanocomposite. MATEC Web of Conferences2018; 150: 02005. DOI: 10.1051/matecconf/201815002005.
53.
BalachandranMBhagawanSS. Mechanical, thermal and transport properties of nitrile rubber (NBR)—nanoclay composites. J Polym Res2012; 19: 9809. DOI: 10.1007/s10965-011-9809-x.
54.
FengXWangBWangX, et al.Molybdenum disulfide nanosheets as barrier enhancing nanofillers in thermal decomposition of polypropylene composites. Chem Eng J2016; 295: 278–287. DOI: 10.1016/j.cej.2016.03.059.
55.
ChakrabortySKarSDasguptaS, et al.Montmorillonite clay nanocomposites based on vinyl pyridine‐styrene‐butadiene terpolymer (VPR)/acrylonitrile-butadiene rubber (NBR) blend. Polym Eng Sci2011; 51: 1675–1681. DOI: 10.1002/pen.21960.
56.
MayasariHESetyoriniIYuniariA. Thermal degradation and swelling behaviour of acrylonitrile butadiene styrene rubber reinforced by carbon black. IOP Conf Ser Mater Sci Eng2018; 432: 012041. DOI: 10.1088/1757-899x/432/1/012041.
57.
EyssaHMAbulyaziedDEAbdulrahmanM, et al.Mechanical and physical properties of nanosilica/nitrile butadiene rubber composites cured by gamma irradiation. Egyptian Journal of Petroleum2018; 27: 383–392. DOI: 10.1016/j.ejpe.2017.06.004.
58.
MensahBKonaduDSNsafulF, et al.A systematic study of the effect of graphene oxide and reduced graphene oxide on the thermal degradation behavior of acrylonitrile-butadiene rubber in air and nitrogen media. Sci Afr2023; 19: e01501. DOI: 10.1016/j.sciaf.2022.e01501.
59.
El-NemrKFRadiHHelalRH. Partial replacement of silica by naturally occurring pumice powder for enhancing mechanical and thermal properties of nitrile rubber cured by electron beam irradiation. Pigment Resin Technol2022; 53: 442–449. DOI: 10.1108/prt-09-2022-0105.
60.
SolimanAEl-NasharDKhalafA, et al. Preparation of antimicrobial efficient rubber vulcanizate compounded with Jojoba seeds meal powder. Egypt J Chem. 2024; 67(13): 421–428. doi:10.21608/ejchem.2024.257770.9049.
61.
RuslimieCAAsrulMNorhanifahMY. The effects of silver nitrate as antimicrobial agent in rubber latex films to reduce hospital acquired infections. J Rubber Res. 2024; 27: 383–397. doi:10.1007/s42464-024-00254-6.
62.
CovaMYarzaFFamáL, et al.Functional clays as reinforcement of nitrile latex films. Prog Org Coating2019; 129: 271–277. DOI: 10.1016/j.porgcoat.2019.01.004.
63.
AndraSBaluSJeevanandamJ, et al.Emerging nanomaterials for antibacterial textile fabrication. Naunyn-Schmiedeberg’s Arch Pharmacol2021; 394: 1355–1382. DOI: 10.1007/s00210-021-02064-8.
64.
MoustaphaMEMotalebMASanadMH. Synthesis and biological evaluation of 99mTc-labetalol for β1-adrenoceptor-mediated cardiac imaging. J Radioanal Nucl Chem. 2015; 309: 511–516. doi:10.1007/s10967-015-4622-3.
65.
SanadHMIbrahimAA. Radioiodination, diagnostic nuclear imaging and bioevaluation of olmesartan as a tracer for cardiac imaging. Radiochim Acta2018; 106: 843–850. DOI: 10.1515/ract-2018-2960.
66.
SanadMHBoraiEH. Performance characteristics of biodistribution of 99mTc-cefprozil for in vivo infection imaging. J Anal Sci Technol. 2018; 5(1): 32. doi:10.1186/s40543-014-0032-3.
67.
RizviSFAZhangHMehmoodS, et al.Synthesis of 99mTc-labeled 2-Mercaptobenzimidazole as a novel radiotracer to diagnose tumor hypoxia. Transl Oncol2020; 13: 100854. DOI: 10.1016/j.tranon.2020.100854.
68.
SanadMHIbrahimAATalaatHM. Synthesis, bioevaluation and gamma scintigraphy of 99mTc-N-2-(furylmethyl iminodiacetic acid) complex as a new renal radiopharmaceutical. J Radioanal Nucl Chem2017; 315: 57–63. DOI: 10.1007/s10967-017-5617-z.
BreijyehZJubehBKaramanR. Resistance of gram-negative bacteria to current antibacterial agents and approaches to resolve it. Molecules2020; 25: 1340. https://pubmed.ncbi.nlm.nih.gov/32187986
71.
SanadMHShweetaHA. Preparation and bio-evaluation of 99mTc-carbonyl complex of ursodeoxycholic acid for heptobiliary imaging. J Mol Imag Dynam. 2015; 5(1): 1000119. doi:10.4172/2155-9937.1000119.
72.
MotalebMASelimAAEl-TawoosyM, et al.Synthesis, radiolabeling and biological distribution of a new dioxime derivative as a potential tumor imaging agent. J Radioanal Nucl Chem2017; 314: 1517–1522. DOI: 10.1007/s10967-017-5310-2.
73.
SanadMHFouzyASMSobhyHM, et al.Tracing the protective activity of Lactobacillus plantarum using technetium-99m-labeled zearalenone for organ toxicity. Int J Radiat Biol2018; 94: 1151–1181. DOI: 10.1080/09553002.2019.1524990.
Azizi-LalabadiMHashemiHFengJ, et al.Carbon nanomaterials against pathogens; the antimicrobial activity of carbon nanotubes, graphene/graphene oxide, fullerenes, and their nanocomposites. Adv Colloid Interface Sci2020; 284: 102250. DOI: 10.1016/j.cis.2020.102250.
76.
ChenJPengHWangX, et al.Graphene oxide exhibits broad-spectrum antimicrobial activity against bacterial phytopathogens and fungal conidia by intertwining and membrane perturbation. Nanoscale2014; 6: 1879–1889. DOI: 10.1039/c3nr04941h.
FathyRMMahfouzAY. Eco-friendly graphene oxide-based magnesium oxide nanocomposite synthesis using fungal fermented by-products and gamma rays for outstanding antimicrobial, antioxidant, and anticancer activities. J Nanostructure Chem2021; 11: 301–321. DOI: 10.1007/s40097-020-00369-3.
79.
Mohammadzadeh-VazifehMHosseiniSMMohammadiA, et al. Investigation of the antimicrobial properties of nanoclay and chitosan based nanocomposite on the microbial characteristics of Gouda cheese. Iran J Microbiol. 2020; 12(2): 121–126. doi:10.18502/ijm.v12i2.2617.
SanadMHMarzookEAChallanSB. Radioiodination of olmesartan medoxomil and biological evaluation of the product as a tracer for cardiac imaging.Radiochim Acta. 2018; 106(4): 329–336.
82.
SanadMHBoraiEHFouzyASM. Chromatographic separation and utilization of labeled 99mTc‐Valsartan for cardiac imaging.J Environ Sci, Toxicol Food Technol. 2014; 8(12): 10–17.
83.
EyssaHMEl RefayHMSanadMH. Enhancement of the thermal and physicochemical properties of styrene butadiene rubber composite foam using nanoparticle fillers and electron beam radiation.Radiochimica Acta. 2022; 110(3): 205–218.
