This study investigated banana fruit waste as a filler in biodegradable biocomposites based on polylactic acid (PLA) and poly (butylene adipate-co-terephthalate) (PBAT). Two filler types, pure banana peel powder (PBP) and mixed banana biomass powder containing peel and pulp (MBP), were incorporated into a PLA/PBAT matrix, while maleic anhydride (MA) was applied as a compatibilizer to improve interfacial adhesion. Among the compatibilized formulations, 5 wt% MA provided the best overall balance of properties. At this composition, tensile strength reached 21.35 MPa for the PBP-based composite and 22.43 MPa for the MBP-based composite, while the corresponding flexural strengths were 11.67 and 10.59 MPa, and impact strengths were 2.79 and 2.32 kJ m-2, respectively. Fourier-transform infrared spectroscopy indicated interactions consistent with esterification between the filler and matrix, which was supported by improved interfacial morphology and reduced void formation. The optimized formulations were further processed into biodegradable bowl prototypes by compression molding. Evaluation of these prototypes showed compliance with 4 of 6 assessed parameters of the Indonesian National Standard for food containers (SNI 12-4260-1996). Overall, the results demonstrate the potential of banana fruit waste as a sustainable filler for PLA/PBAT-based biodegradable composites and support its further development for disposable packaging applications, although additional studies on food-contact safety and long-term performance are still needed.
SiddiquiSAYangXDeshmukhRK, et al.Recent advances in reinforced bioplastics for food packaging – a critical review. Int J Biol Macromol2024; 263: 130399. https://doi.org/10.1016/j.ijbiomac.2024.130399
2.
GhasemlouMBarrowCJAdhikariB. The future of bioplastics in food packaging: an industrial perspective, Food Packag. Shelf Life2024; 43: 101279. https://doi.org/10.1016/j.fpsl.2024.101279
3.
ChakrabortyPHatiSMishraBK. Biocomposite films from banana flour/halloysite nanoclay/carvacrol: preparation, characterization, and application on capsicum (Capsicum annuum) fruits. Sustain Chem Pharm2023; 36: 101304. https://doi.org/10.1016/j.scp.2023.101304
4.
TamminaSKRhimJW. Carboxymethylcellulose/agar-based functional film incorporated with nitrogen-doped polyethylene glycol-derived carbon dots for active packaging applications. Chemosphere2023; 313: 137627. https://doi.org/10.1016/j.chemosphere.2022.137627
BeheraDPattnaikSSNandaD, et al.A review on bamboo fiber reinforced composites and their potential applications. Emerg Mater2025; 8: 157–172. https://doi.org/10.1007/s42247-024-00832-9
7.
NanthakumarKYengCMChunKS. Tensile and water absorption properties of solvent cast biofilms of sugarcane leaves fibre-filled poly(lactic) acid. J Thermoplast Compos Mater2020; 33: 289–304. https://doi.org/10.1177/0892705718805526
8.
CardosoECLParraDFScagliusiSR, et al.Study of bio-based foams prepared from PBAT/PLA reinforced with bio-calcium carbonate and compatibilized with gamma radiation. Use of Gamma Radiation Techniques in Peaceful Applications. IntechOpen, 2019. https://doi.org/10.5772/intechopen.85462
9.
Europeanbioplastics. Growth resumption: global production capacities of bioplastics 2023-2028, 2024.
10.
ZhangJLiPLiY, et al.Preparation of PLA/PBAT blends with high performance via the synergistic effect of high mold temperature and strong shear field. Polymer2024; 296: 126795. https://doi.org/10.1016/j.polymer.2024.126795
11.
ChuakhaoSRodríguezJTLapnonkawowS, et al.Formulating PBS/PLA/PBAT blends for biodegradable, compostable packaging: the crucial roles of PBS content and reactive extrusion. Polym Test2024; 132: 108383. https://doi.org/10.1016/j.polymertesting.2024.108383
12.
HanYShiJMaoL, et al.Improvement of compatibility and mechanical performances of PLA/PBAT composites with epoxidized soybean oil as compatibilizer. Ind Eng Chem Res2020; 59: 21779–21790. https://doi.org/10.1021/acs.iecr.0c04285
13.
LiuTLianXLiL, et al.Facile fabrication of fully biodegradable and biorenewable poly (lactic acid)/poly (butylene adipate-co-terephthalate) in-situ nanofibrillar composites with high strength, good toughness and excellent heat resistance. Polym Degrad Stabil2020; 171: 109044. https://doi.org/10.1016/J.POLYMDEGRADSTAB.2019.109044
CaiKLiuXMaX, et al.Preparation of biodegradable PLA/PBAT blends with balanced toughness and strength by dynamic vulcanization process. Polymer2024; 291: 126587. https://doi.org/10.1016/j.polymer.2023.126587
KanwalAZhangMSharafF. Synergistic degradation of PBAT poly (butylene adipate-co-terephthalate) co-polyesters using a bacterial co-culture system. Polym Bull2024; 81: 2741–2755. https://doi.org/10.1007/s00289-023-04849-8
18.
ArifinIAMarsiNRusAZM, et al.Biodegradable, physical and mechanical characteristics of Banana peel (Musa Paradisiaca) for Bio-plastics polymer composites. Journal of Advanced Research in Applied Mechanics2024; 115: 1–17. https://doi.org/10.37934/aram.115.1.117
19.
NazarudinAIBasriAABasriEI, et al.Mechanical and thermal performance of polylactic Acid (PLA)- Saba banana peel composite. J Mater Res Technol2025; 38: 1552–1562. https://doi.org/10.1016/J.JMRT.2025.07.280
20.
KumarTSMRajiniNSiengchinS, et al.Influence of Musa acuminate bio-filler on the thermal, mechanical and visco-elastic behavior of poly (propylene) carbonate biocomposites. Int J Polym Anal Char2019; 24: 439–446. https://doi.org/10.1080/1023666X.2019.1602910
BeheraDPattnaikSSMishraPP, et al.Fabrication and characterization of industrial biocomposite from cellulosic fibers of Luffa cylindrica in a protein based natural matrix. Ind Crops Prod2024; 212: 118328. https://doi.org/10.1016/j.indcrop.2024.118328
23.
BishoyiKCPattnaikSSBeheraD, et al.Effect of banana peduncle fiber on the mechanical, water, and degradation properties of hybrid composites made from modified soy resin. Polym Compos2023; 44: 6604–6615. https://doi.org/10.1002/pc.27583
24.
SuS. Compatibilization, processing and characterization of poly(butylene adipate terephthalate)/polylactide (PBAT/PLA) blends. Mater Res Express2022; 9: 025308. https://doi.org/10.1088/2053-1591/ac55c7
GutiérrezTJAlvarezVA. Films made by blending Poly(ε-Caprolactone) with starch and flour from Sagu Rhizome grown at the Venezuelan amazons. J Polym Environ2017; 25: 701–716. https://doi.org/10.1007/s10924-016-0861-9
27.
HaoXXuJZhouH, et al.Interfacial adhesion mechanisms of ultra-highly filled wood fiber/polyethylene composites using maleic anhydride grafted polyethylene as a compatibilizer. Mater Des2021; 212: 110182. https://doi.org/10.1016/j.matdes.2021.110182
28.
BajwaDSAdhikariSShojaeiaraniJ, et al.Characterization of bio-carbon and ligno-cellulosic fiber reinforced bio-composites with compatibilizer. Constr Build Mater2019; 204: 193–202. https://doi.org/10.1016/j.conbuildmat.2019.01.068
29.
PakSParkSSongYS, et al.Micromechanical and dynamic mechanical analyses for characterizing improved interfacial strength of maleic anhydride compatibilized basalt fiber/polypropylene composites. Compos Struct2018; 193: 73–79. https://doi.org/10.1016/j.compstruct.2018.03.020
30.
PesaranhajiabbasEMisraMMohantyAK. Recent progress on biodegradable polylactic acid based blends and their biocomposites: a comprehensive review. Int J Biol Macromol2023; 253: 126231. https://doi.org/10.1016/j.ijbiomac.2023.126231
EzzahraeMFNacerALatifaE, et al.Thermal and mechanical properties of a high-density polyethylene (HDPE) composite reinforced with wood flour. Mater Today Proc2023; 72: 3602–3608. https://doi.org/10.1016/j.matpr.2022.08.394
33.
MartinsGAntunesFMateusA, et al.Optimization of a wood plastic composite for architectural applications. Procedia Manuf2017; 12: 203–220. https://doi.org/10.1016/j.promfg.2017.08.025
34.
FouratiYTarrésQMutjéP, et al.PBAT/thermoplastic starch blends: effect of compatibilizers on the rheological, mechanical and morphological properties. Carbohydr Polym2018; 199: 51–57. https://doi.org/10.1016/j.carbpol.2018.07.008
35.
DeDNaga SaiMSAniyaV, et al.Strategic biorefinery platform for green valorization of agro-industrial residues: a sustainable approach towards biodegradable plastics. J Clean Prod2021; 290: 125184. https://doi.org/10.1016/j.jclepro.2020.125184
36.
KumariP, A review on banana, its nutritional components and bioactive compounds. Pharm Innov2023; 12: 663–666.
37.
KumariPGaurSSTiwariRK. Banana and its by-products: a comprehensive review on its nutritional composition and pharmacological benefits. EFood2023; 4: e110. https://doi.org/10.1002/efd2.110
38.
AcevedoSADíaz CarrilloÁJFlórez-LópezE, et al.Recovery of Banana waste-loss from production and processing: a contribution to a circular economy. Molecules2021; 26. https://doi.org/10.3390/molecules26175282
39.
de MatosMEBianchi Pedroni MedeirosAde Melo PereiraGV, et al.Production and characterization of a distilled alcoholic beverage obtained by fermentation of banana waste (Musa cavendishii) from selected yeast. Fermentation2017; 3: 62. https://doi.org/10.3390/fermentation3040062
40.
VianaLMRodriguesFSRSantosMCB, et al.Green banana (Musa ssp.) mixed pulp and peel flour: a new ingredient with interesting bioactive, nutritional, and technological properties for food applications. Food Chem2024; 451: 139506. https://doi.org/10.1016/j.foodchem.2024.139506
41.
KhoozaniAABirchJBekhitAEDA. Production, application and health effects of banana pulp and peel flour in the food industry. J Food Sci Technol2019; 56: 548–559. https://doi.org/10.1007/s13197-018-03562-z
42.
AshkaFKumarSDubeyPK. Banana peels as bioactive ingredients: a systematic review of nutritional and pharmacological attributes. Journal of Food Chemistry & Nanotechnology2023; 9. https://doi.org/10.17756/jfcn.2023-s1-073
43.
SapeiL. Proximate composition and functional properties of banana flour at different ripening stages. Jurnal Litbang Industri2023; 13: 41. https://doi.org/10.24960/jli.v13i1.8021.41-49
44.
TsegayNAdmassuHZegaleB, et al.Nutritional and functional potentials of wheat, cowpea, and yam composite flours on bread formulations: effect of blending ratio and baking parameters. J Agric Food Res2024; 18: 101294. https://doi.org/10.1016/j.jafr.2024.101294
45.
VenegasRTorresARuedaAM, et al.Development and characterization of plantain (Musa paradisiaca) flour-based biopolymer films reinforced with plantain fibers. Polymers2022; 14: 748. https://doi.org/10.3390/polym14040748
46.
Popoola-AkinolaOORajiTJOlawoyeB. Lignocellulose, dietary fibre, inulin and their potential application in food. Heliyon2022; 8: e10459. https://doi.org/10.1016/j.heliyon.2022.e10459
47.
MujtabaMFernandes FracetoLFazeliM, et al.Lignocellulosic biomass from agricultural waste to the circular economy: a review with focus on biofuels, biocomposites and bioplastics. J Clean Prod2023; 402: 136815. https://doi.org/10.1016/j.jclepro.2023.136815
48.
SyukrianiLFebjislamiSLubisDS, et al.Physicochemical characterization of peel, flesh and banana fruit cv. raja [Musa paradisiaca]. IOP Conf Ser Earth Environ Sci. IOP Publishing Ltd, 2021. https://doi.org/10.1088/1755-1315/741/1/012006
49.
HikalWMSaid-Al AhlHAHBratovcicA, et al.Banana peels: a waste treasure for human being. Evid Based Complement Alternat Med2022; 2022. https://doi.org/10.1155/2022/7616452
50.
ChristianSJ. Natural fibre-reinforced noncementitious composites (biocomposites), Nonconventional and Vernacular Construction Materials: Characterisation, Properties and Applications. In: Nonconventional and Vernacular Construction Materials. 2020. pp. 169–187. https://doi.org/10.1016/B978-0-08-102704-2.00008-1
51.
KhatunMAhmedMWHossainMM, et al.Utilization of Banana Peel flour in biscuit making as wheat flour substitute. European Journal of Agriculture and Food Sciences2021; 3: 32–35. https://doi.org/10.24018/ejfood.2021.3.6.407
52.
ZainiHMRoslanJSaallahS, et al.Banana peels as a bioactive ingredient and its potential application in the food industry. J Funct Foods2022; 92. https://doi.org/10.1016/j.jff.2022.105054
53.
RagabMOsmanMFKhalilMEAnd Gouda, Banana (Musa Sp). Peels as A source of Pectin and some food nutrients, 2016.
54.
SinghTPChauhanGAgrawalRK, et al.Development and process optimization of biodegradable films based on Banana (Musa sp.) flour. J Anim Res2017; 7: 733. https://doi.org/10.5958/2277-940x.2017.00112.7
55.
PhillipsKMMcGintyRCCoutureG, et al.Dietary fiber, starch, and sugars in bananas at different stages of ripeness in the retail market. PLoS One2021; 16: e0253366. https://doi.org/10.1371/journal.pone.0253366
56.
GamageALiyanapathiranageAManamperiA, et al.Applications of starch biopolymers for a sustainable modern agriculture. Sustainability2022; 14: 6085. https://doi.org/10.3390/su14106085
57.
JayarathnaSAnderssonMAnderssonR. Recent advances in starch-based blends and composites for bioplastics applications. Polymers2022; 14: 4557. https://doi.org/10.3390/polym14214557
58.
TenemazaKAlmeida-NaranjoCEGutiérrezP, et al.Bio-composites from barley, wheat, and cassava flours reinforced with oil palm residues: characterization and tensile mechanical performance. Heliyon2024; 10: e39713. https://doi.org/10.1016/j.heliyon.2024.e39713
59.
ThivyaPGururajPNReddyNBP, et al.Recent advances in protein-polysaccharide based biocomposites and their potential applications in food packaging: a review. Int J Biol Macromol2024; 268: 131757. https://doi.org/10.1016/J.IJBIOMAC.2024.131757
60.
El HosryLEliasVChamounV, et al.Maillard reaction: mechanism, influencing parameters, advantages, disadvantages, and food industrial applications: a review. Foods2025; 14: 1881. https://doi.org/10.3390/foods14111881
ZhangWPLuYHKhanalS, et al.Effects of compatibilizers on selected properties of hdpe composites highly filled with bamboo flour. Wood Fiber Sci2018; 50: 254–264. https://doi.org/10.22382/wfs-2018-026
63.
KaynakCMeyvaY. Use of maleic anhydride compatibilization to improve toughness and other properties of polylactide blended with thermoplastic elastomers. Polym Adv Technol2014; 25: 1622–1632. https://doi.org/10.1002/pat.3415
64.
GeXChangMJiangW, et al.Selective location of kaolin and effects of maleic anhydride in kaolin/poly(ε-caprolactone)/poly(lactic acid) composites. Appl Clay Sci2020; 189: 105524. https://doi.org/10.1016/j.clay.2020.105524
65.
PardiSAZuhraYSAminA, et al.Physical, morphological, mechanical and thermal properties of polyester composites reinforced with orientation of purun fiber (Eleocharis dulcis) composition. S Afr J Chem Eng2024; 47: 338–344. https://doi.org/10.1016/j.sajce.2023.11.014
66.
ChaiwutthinanPChuayjuljitSSrasomsubS, et al.Composites of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blend with wood fiber and wollastonite: physical properties, morphology, and biodegradability. J Appl Polym Sci2019; 136: 47543. https://doi.org/10.1002/app.47543
67.
NegawoTAPolatYKilicA. Effect of compatibilizer and fiber loading on ensete fiber-reinforced HDPE green composites: physical, mechanical, and morphological properties. Compos Sci Technol2021; 213: 108937. https://doi.org/10.1016/j.compscitech.2021.108937
68.
OlonisakinKLinHHaojinP, et al.Fiber treatment impact on toughness and interfacial bonding in epoxidized soya bean oil compatibilized PLA/PBAT bamboo fiber composites. Mater Today Commun2024; 38: 107790. https://doi.org/10.1016/J.MTCOMM.2023.107790
69.
ZhaoCZhaoJMarkLH, et al.A novel strategy of implementing coupling agents in micro/nano-fibrillated composites. Polymer2023; 273: 125837. https://doi.org/10.1016/j.polymer.2023.125837
70.
Rodriguez-UribeAHarderNMisraM, et al.Biocomposites from poly (butylene succinate-co-butylene adipate) biodegradable plastic and hop natural fiber: studies on the effect of compatibilizer on performance of the composites. Composites Part C: Open Access2023; 12: 100408. https://doi.org/10.1016/j.jcomc.2023.100408
71.
AryaSKumarRChauhanS. Preparation and characterization of woven jute fabric layered composite by using bamboo fiber reinforced polymers as resin matrix. Constr Build Mater2024; 411: 134343. https://doi.org/10.1016/j.conbuildmat.2023.134343
72.
YiSLiuWXuS, et al.Enhancement and compatibilization of waste-sourced biocomposites through elastomer blending and matrix grafting modification. Molecules2024; 29: 4905. https://doi.org/10.3390/molecules29204905
73.
HuynhMDTrungTHvan CongD, et al.Effect of maleic anhydride grafted ethylene vinyl acetate compatibilizer on the mechanical, thermal properties and weathering resistance of polyamide 11/bamboo fiber composite. Mater Trans2020; 61: 1527–1534. https://doi.org/10.2320/matertrans.MT-MN2019001
74.
da SilveiraPHPMdos SantosMCCChavesYS, et al.Characterization of thermo-mechanical and chemical properties of polypropylene/hemp fiber biocomposites: impact of maleic anhydride compatibilizer and fiber content. Polymers2023; 15: 3271. https://doi.org/10.3390/polym15153271
75.
JunaediHBaigMDawoodA, et al.Effect of the matrix melt flow index and fillers on mechanical properties of polypropylene-based composites. Materials2022; 15: 7568. https://doi.org/10.3390/ma15217568
76.
NomadoloNMtibeAOfosuO, et al.The effect of mechanical recycling on the thermal, mechanical, and chemical properties of poly (Butylene Adipate-Co-Terephthalate) (PBAT), Poly (Butylene Succinate) (PBS), Poly (Lactic Acid) (PLA), PBAT-PBS blend and PBAT-TPS biocomposite. J Polym Environ2024; 32: 2644–2659. https://doi.org/10.1007/s10924-023-03151-y
77.
AkhbarSNik OmarNSNMohd YusofAN, et al.Preliminary study of melt flow index of recycled Polyethylene Terephthalate/Empty fruit bunch (rPET/EFB) composite as a potential biodegradable 3D printing filament. Mater Today Proc2023; 87: 366–369. https://doi.org/10.1016/J.MATPR.2023.03.625
78.
LiXYanXYangJ, et al.Improvement of compatibility and mechanical properties of the poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends and films by reactive extrusion with chain extender. Polym Eng Sci2018; 58: 1868–1878. https://doi.org/10.1002/pen.24795
79.
NakayamaDWuFMohantyAK, et al.Biodegradable composites developed from PBAT/PLA binary blends and silk powder: compatibilization and performance evaluation. ACS Omega2018; 3: 12412–12421. https://doi.org/10.1021/acsomega.8b00823
80.
YoganandamKShanmugamVVasudevanA, et al.Investigation of dynamic, mechanical, and thermal properties of Calotropis procera particle-reinforced PLA biocomposites. Adv Mater Sci Eng2021; 2021: 2491489. https://doi.org/10.1155/2021/2491489
81.
ChaiwutthinanPChauyjuljitSThipkhamN, et al.Poly(lactic acid)/ethylene vinyl acetate copolymer blend composites with wood flour and wollastonite: physical properties, morphology, and biodegradability. J Vinyl Addit Technol2019; 25: 313–327. https://doi.org/10.1002/vnl.21697
82.
BajpaiSNarayanKGargM. Evaluation of the mechanical, biodegradable, and water absorption characteristics of PLA and Orange peel composite. 2024. https://ssrn.com/abstract=4975328
83.
SambudiNSLinWYHarunNY, et al.Modification of poly(lactic acid) with Orange peel powder as biodegradable composite. Polymers2022; 14: 4126. https://doi.org/10.3390/polym14194126
84.
ChauhanSAggarwalPKarmarkarA. The effectiveness of m-TMI-grafted-PP as a coupling agent for wood polymer composites. J Compos Mater2016; 50: 3515–3524. https://doi.org/10.1177/0021998315622050
85.
AryaSKumarRChauhanS, et al.Development of natural fiber reinforced thermoplastic bonded hybrid wood veneer composite. Constr Build Mater2023; 368: 130459. https://doi.org/10.1016/j.conbuildmat.2023.130459
86.
MustafaNYusufYKudusSIA, et al.The influence of MAPP and MAPE compatibilizers on physical and mechanical properties of 3D printing filament made of wood Fiber/recycled polypropylene. Pertanika J. Sci. Technol2024; 32: 77–90. https://doi.org/10.47836/PJST.32.S2.06
87.
VermaPRaniRDasD, et al.Transformation of banana peel into biodegradable film added with starch and carboxymethyl cellulose and its characterization. Sustain Chem Pharm2024; 37: 101356. https://doi.org/10.1016/J.SCP.2023.101356
88.
AkondaMAlimuzzamanSShahDU, et al.Physico-mechanical, thermal and biodegradation performance of random flax/polylactic acid and unidirectional flax/polylactic acid biocomposites. Fibers2018; 6: 98. https://doi.org/10.3390/fib6040098
89.
RigottiDFambriLPegorettiA. Bio-composites for fused filament fabrication: effects of maleic anhydride grafting on poly(lactic acid) and microcellulose. Progr Addit Manuf2022; 7: 765–783. https://doi.org/10.1007/s40964-022-00264-z
90.
SyafriESudirmanMYuliantiE, et al.Effect of sonication time on the thermal stability, moisture absorption, and biodegradation of water hyacinth (Eichhornia crassipes) nanocellulose-filled bengkuang (Pachyrhizus erosus) starch biocomposites. J Mater Res Technol2019; 8: 6223–6231. https://doi.org/10.1016/j.jmrt.2019.10.016
91.
MorelliCLBelgacemNBretasRES, et al.Melt extruded nanocomposites of polybutylene adipate-co-terephthalate (PBAT) with phenylbutyl isocyanate modified cellulose nanocrystals. J Appl Polym Sci2016; 133: app.43678. https://doi.org/10.1002/app.43678
92.
Camacho-MuñozRVillada-CastilloHSSolanilla-DuqueJF. Anaerobic biodegradation under slurry thermophilic conditions of poly(lactic acid)/starch blend compatibilized by maleic anhydride. Int J Biol Macromol2020; 163: 1859–1865. https://doi.org/10.1016/J.IJBIOMAC.2020.09.183
93.
VargasCGCostaTMHRiosAde O, et al.Comparative study on the properties of films based on red rice (Oryza glaberrima) flour and starch. Food Hydrocoll2017; 65: 96–106. https://doi.org/10.1016/j.foodhyd.2016.11.006
94.
BandyopadhyayJBotlhokoOJMphahleleC, et al.Reactively processed Poly(butylene adipate terephthalate) composite–based multilayered films with improved properties for sustainable packaging applications: structural characterization and biodegradation mechanism. Macromol Chem Phys2024; 225: 2400067. https://doi.org/10.1002/macp.202400067
