Fiber Stresses in a Cracked Monolayer: Comparison of Shear-Lag and 3-D Finite Element Predictions*

Abstract

Shear-lag and 3-D finite element predictions for the fiber stresses in a cracked monolayer are compared. Results are given for 5-fiber wide boron/aluminum and Kevlar 49/epoxy monolayers containing a single broken fiber. Both methods of analysis are found to predict nearly the same fiber stress distribution along the crack- tip fiber when the monolayer is fully elastic. Results for highly loaded monolayers with extensive matrix yielding are not in quite as good agreement, but even then the predicted stress distributions are within 5%. These calculations show that a shear-lag analysis is accurate even when 1) the matrix is relatively stiff and can carry substantial loads (e.g., boron/aluminum), and 2) the fiber is highly anisotropic, (e.g., Kevlar 49/epoxy).

Get full access to this article

View all access options for this article.

References

Hedgepeth, J.M. , "Stress Concentrations in Filamentary Structures," NASA TND-882 , National Aeronautics and Space Administration , Langley (1961).

Reedy, E.D. , Jr., "Analysis of Center-Notched Monolayers with Application to Boron/ Aluminum Composites," J. Mech. Phys. Solids , Vol. 28, p. 265(1980).

Reedy, E.D. , Jr., "Fracture of Notched, Unidirectional Boron/Aluminum: Experiment and Analysis," MECHANICS OF COMPOSITE MATERIALS-1983, ASME-AMD Vol. 58, Editor, G. J. Dvorak.

Goree, J.G. , and Gross, R.S. , "Analysis of a Unidirectional Composite Containing Broken Fibers and Matrix Damage," Engng. Fracture Mech. , Vol. 13, p. 563( 1979).

Dharani, L.R. , Jones, W.F. , and Goree, J.G. , "Mathematical Modeling of Damage in Unidirectional Composites," Engng. Fracture Mech. , Vol. 17, p. 555 (1983).

Fukida, H. , and Chou, T.W. , "Monte Carlo Simulation of the Strength of Hybrid Composites," J. Composite Materials, Vol. 16, p. 371 (1982 ).

Penn, L.S. , Bystry, F.A. , and Marchionni, H.J. , "Relation of Interfacial Adhesion in Kevlar/Epoxy Systems to Surface Characterization and Composite Performance," Polymer Composites, Vol. 4, p. 26(1983).

Reedy, E.D., Jr. , "Fiber Stress Concentrations in Kevlar/Epoxy Monolayers," to be published.

Batdorf, S.B. , and Ko, W.C. , "Use of Shear Lag for Composite Microstress Analysis— Linear Array," UCLA-ENG-83-37, Univ. California Los Angeles School of Engineering and Applied Science (July 1983).

10.

Batdorf, S.B. , and Ko, W.C. , "Use of Shear Lag for Composite Microstress Analysis— Rectangular Array," UCLA-ENG-83-36, Univ. California Los Angeles School of Engineering and Applied Science (July 1983).

11.