Simplified Design Techniques for Laminated Cylindrical Pressure Vessels under Stiffness and Strength Constraints

Abstract

This paper treats the optimum design of graphite/epoxy laminated composite cylindrical pressure vessels under stiffness and strength constraints based upon the membrane theory. Stiffness constraints are specified as strain conditions both in the axial and circumferential directions. Tsai-Wu failure criterion is used for determining a first-ply-failure strength. The stiffness and strength characteristics of the laminate are discussed based upon the concept of lamination parameters. For small values of allowable axial and circumferential strains, the strain (or stiffness) condition is critical, while for large values of allowable strains the strength condition is critical. The optimal laminate configurations are determined for the various kinds of strain and strength constraints.

Get full access to this article

View all access options for this article.

References

Roy, A.K. and S.W. Tsai. "Pressure Vessels, in 'Composites Design," 3rd ed., S. W. Tsai , ed., Thank Composites, Dayton (1987).

Chnstensen, N. and E. Wolcott. "Development and Fabrication of a Graphite/Epoxy Motor Case for Air Launch Missile Applications," 29th National SAMPE Symposium, pp. 1335-1348 (1984).

Fukunaga, H. and M. Uemura. "Optimum Design of Helically Wound Composite Pressure Vessels," Composite Structures, 1:31-49 (1983).

Verderaime, V. and M. Rhemfurth. "Identification and Management of Filament-Wound Case Stiffness Parameters," NASA TP 2117 (1983)

Verderaime, V. "Development of In Situ Stiffness Properties for Shuttle Booster Filament Wound Case," NASA TP 2377 (1984).

Miki, M. "Material Design of Composite Laminates with Required In-Plane Elastic Properties," Proc. ICCM IV, pp. 1725-1731 (1982).

Fukunaga, H. and Y. Hirano. "Stability Optimization of Laminated Composite Plates under In-Plane Loads," Proc. ICCM IV, pp. 565-572 (1982)

Onoda, J. "Optimal Laminate Configurations of Cylindrical Shells for Axial Buckling ," AIAA J., 23:1093-1098 (1985 )

Fukunaga, H. and T.W. Chou "On Laminate Configurations for Simultaneous Failure," J. Composite Materials, 22 271-286 (1988)

10.

Tsai, S.W. and H.T. Hahn Introduction to Composite Materials, Lancaster, PA: Technomic Publishing Co., Inc (1980)