A Universal Model for the Overall Thermal Conductivity of Porous Media

Abstract

A general field theory is developed in this work to estimate the overall degradation of the thermal conductivity of the solid due to the presence of internal cavities. In addition to the volume fraction of cavities in the matrix material, the effect of internal heat transfer across the pore surface on the overall thermal conductivity is absorbed in an added tensor. Based on the field theory thus formulated, application is made to investigate the effects of pore geometry and internal heat transfer on the overall thermal conductivity. In the aspect of pore geometry, the overall thermal conductivity of the porous medium is obtained for insulated spherical cavities and penny-shaped cracks. In the aspect of internal heat transfer, on the other hand, the effect of heat conduction and convection across the pore surface is analyzed. All the cases under consideration are compared with the experimental results and the dominant physical modulus in the overall thermal conductivity is identified for each case.

Get full access to this article

View all access options for this article.

References

1. Loeb, A. L. 1954. “Thermal Conductivity: VIII, A Theory of Thermal Conductivity of Porous Materials,” J. Am. Ceram. Soc., 37:96.

2. Maxwell, J. A. 1954. A Treatise on Electricity and Magnetism, Vol. 1, 3rd Ed. New York: Dover, Chapter 9, Article 314.

3. Koh, J. C. Y. and A. Fortini. 1971. “Thermal Conductivity and Electrical Resistivity of Porous Material,” NASA Report No. NAS3–12012, CR-120854.

4. Russell, H. W. 1935. “Principles of Heat Flow in Porous Materials,” J. Am. Ceram. Soc., 18:1.

5. Eucken, A. 1972. “Thermal Conductivity of Ceramic Refractory Materials; Calculation from Thermal Conductivity of Constituents,” Forsch. Geb. Ing. Wes., B3, Forschungsheft, 16: Ceramic Abstr., 11:576, 1932; 12:231, 1933.

6. Franel, J. and W. D. Kingery . 1954. “Thermal Conductivity: IX, Experimental Investigation of Effect of Porosity on Thermal Conductivity,” J. Am. Ceram. Soc., 37:99.

7. Murabayashi, M. et al. 1969. “Effect of Porosity on the Thermal Conductivity of ThO2,” J. Nucl. Sci. Tech., 6:47.

8. Agapiou, J. S. , and M. F. DeVries . 1989. “An Experimental Determination of the Thermal Conductivity of a 304L Stainless Steel Powder Metallurgy Material,” ASME J. Heat Transfer, 111:281.

9. El-Fekey, S. A. et al. 1978. “Mathematical Analysis of the Dependence of Thermal Conductivity on Porosity,” Powder Metallurgy Int., 37:80.

10.

10. Stuckes, A. D. , and R. P. Chasmar . 1956. “Measurement of the Thermal Conductivity of Semiconductors,” Report of the Meeting of Semiconductors, Phys. Soc., London, pp. 119–125.

11.

11. Williams, D. R. , and H. A. Blum . 1967. “Thermal Conductivities of Several Methods: An Evaluation of a Method Employed by the NBS,” Proc. 17th Conf. Thermal Conductivity, NBS 302, pp. 349–354.

12.

12. Mirkovich, V. V. 1965. “Comparative Method and Choice of Standards for Thermal Conductivity Determinations,” J. Am. Ceram. Soc., 48:387.

13.

13. Flynn, D. R. 1969. “Thermal Conductivity of Ceramics in Mechanical and Thermal Properties of Ceramics,” NBS Spec. Publ., 303:104.

14.

14. Laubitz, M. J. 1969. Thermal Conductivity, Vol. 1, R. P. Tye , ed., London: Academic Press.

15.

15. Tye, R. P. , ed. 1969. Thermal Conductivity, Vol. 2, London: Academic Press.

16.

16. Budiansky, B. 1965. “On the Elastic Moduli of Some Heterogeneous Materials,” J. Mech. Phys. Solids, 13:223.

17.

17. Budiansky, B. 1970, “Thermal and Thermoelastic Properties of Isotropic Composites,” J. Compos. Mater., 4:286.

18.

18. Budiansky, B. and R. J. O'Connell . 1976. “Elastic Moduli of a Cracked Solid,” Int. J. Solids Structures, 12:81.

19.

19. Hasselman, D. P. H. 1978. “Effect of Cracks on Thermal Conductivity,” J. Compos. Mater., 12:403.

20.

20. Cleary, M. P. , I. W. Chen and S. M. Lee . 1980. “Self-Consistent Techniques for Heterogeneous Media,” J. Eng. Mech. Div., ASCE, 106:861.

21.

21. Hill, R. 1965. “A Self-Consistent Mechanics of Composite Materials,” J. Mech. Phys. Solids, 13:213.

22.

22. Hoenig, A. 1983. “Thermal Conductivities of a Cracked Solid,” J. Compos. Mater., 17:231.

23.

23. Horii, H. and S. Nemat-Nasser . 1983. “Overall Moduli of Solids with Microcracks: Load-Induced Anisotropy,” J. Mech. Phys. Solids, 31:155.

24.

24. Taylor, L. M. , E. P. Chen and J. S. Kuszmaul . 1986. “Microcracking-Induced Damage Accumulation in Brittle Rock under Dynamic Loading,” Comp. Methods. Appl. Mech. Eng., 55:301.

25.

25. Tzou, D. Y. , and E. P. Chen . “Compressive and Tensile Damage in the Vicinity of a Macrocrack Tip,” 11th U.S. Nat. Cong. Appl. Mech., Tucson, AZ, May 21–25, 1990.

26.

26. Tzou, D. Y. , and E. P. Chen . 1990. “Mesocrack Damage Induced by a Macrocrack in Heterogeneous Materials,” J. Eng. Fracture Mech.

27.

27. Florence, A. L. , and J. N. Goodier . 1963. “The Linear Thermoelastic Problem of Uniform Heat Flow Disturbed by a Penny-Shaped Insulated Crack,” Int. J. Eng. Sci., 1:533.

28.

28. Kassir, M. K. , and G. C. Sih . 1975. Mechanics of Fracture 2, Three-Dimensional Crack Problems. Leyden, The Netherlands: Noordhoff International Publishing, Chapter 3.