Correlation of Residual Strength with Acoustic Emission from Impact-Damaged Composite Structures under Constant Biaxial Load

Abstract

Small, filament-wound, Kevlar/epoxy, biaxial test specimens were sub jected to various levels of impact damage at the Oak Ridge Y-12 Plant.** The specimens were pressurized in a proof test cycle to 58% of their nominal, undamaged strength and then pressurized to failure. Acoustic emission data were gathered by multiple sensors dur ing a 10 minute hold at peak proof pressure. Post-test filtering of the data was performed to study composite behavior in the damaged region and other areas. The rate and total amount of AE produced depends on the duration of the static load and degree of damage. The concept of the event rate moment is introduced as a method of quantifying a struc ture's total AE behavior when under static load. Average event rate, total long duration events, and event rate moments provided various degrees of correlation between AE and residual strength.

Keywords

acoustic emission biaxial test specimens composite materials impact damage residual strength static load.

Get full access to this article

View all access options for this article.

References

Hamstad, M.A. 1986. "A Discussion of the Basic Understanding of the Felicity Effect in Fiber Composites," Journal of Acoustic Emission, 5(2):95-102.

Whittaker, J.W. , W.D. Brosey and M.A. Hamstad. 1989. "Correlation of Felicity Ratio and Strength Behavior of Impact-Damaged Spherical Composite Test Specimens," Proceedings, Third International Symposium on Acoustic Emission from Reinforced Composites, Paris, France, July 17-21, 1989. Columbus, OH: ASNT, Inc.

Whittaker, J.W. , W.D. Brosey and M.A. Hamstad. 1990. "Acoustic Emission Behavior of Impact-Damaged Composite Biaxial Test Specimens under Constant Load," paper summaries of the 1990 ASNT Spring Conference, San Antonio, TX, March 19-23, 1990. Columbus, OH: ASNT, Inc.

Jinen, E. 1985. "Acoustic Emission of Single Notched Short Carbon Fiber Reinforced Nylon 6 (FRPT) under Constant Tensile Load," Engineering Fracture Mechanics, 21(1):49-61.

McNally, D.J. 1985. "Inspection of Composite Rocket Motor Cases Using Acoustic Emission," Materials Evaluation , 43(5):728-739.

Gorman, M.R. and T.H. Rytting. 1983. "Long Duration AE Events in Filament Wound Graphite/Epoxy in the 100-300 KHz Band Pass Region," Proceedings, First International Symposium on Acoustic Emission from Reinforced Composites. San Francisco, CA, July 19-21, 1983. New York: Society of the Plastics Industry Inc.

Gorman, M.R. 1990. "Burst Prediction by Acoustic Emission in Filament-Wound Pressure Vessels," Journal of Acoustic Emission, 9(2):131-139.

Whittaker, J.W. , W.D. Brosey and M.A. Hamstad. 1989. "Felicity Ratio Behavior of Pneumatically and Hydraulically Loaded Spherical Composite Test Specimens," Proceedings, Third International Symposium on Acoustic Emission from Reinforced Composites, Paris, France, July 17-21, 1989. Columbus, OH: ASNT, Inc.

Hamstad, M.A. and R.G. Patterson. 1977. "Considerations for Acoustic Emission Monitoring of Spherical Kevlar/Epoxy Composite Pressure Vessels," Composites in Pressure Vessels and Piping, ASME Publication PVP-PB-021 NY: American Society of Mechanical Engineers.

10.

Whittaker, J.W. , W. D. Brosey, O. Burenko and D.A. Waldrop. 1988. ' Acoustic Emission Propagation and Source Location in Small, Spherical Composite Test Specimens," Journal of Acoustic Emission, 7(1):31-40.

11.

Russell, J.C. and M.R. Gorman. 1983. "Acoustic Emission Prediction of Burst Pressures in Twenty-Inch Diameter Filament Wound Graphite/Epoxy Bottles," Proceedings, First International Symposium on Acoustic Emission from Reinforced Composites, San Francisco, CA, July 19-21, 1983. NY: Society of the Plastics Industry, Inc.