The Elastic Deformation of Lubricated Carbon Fiber Bundles: Comparison of Theory and Experiments

Abstract

During typical composites manufacturing processes, fibers are deformed in ways that alter their processing characteristics (e.g., permeability, stresses and resin pressure, etc.) and their resulting microstructure (fiber volume fraction, void fraction, etc.). In this paper, we review all available data for the deformation behavior of lubricated carbon fiber bundles and compared it to a recently developed 3-D theory [15]. Most of the data, which is for transverse compression, exhibits very large scatter, but can be collapsed by shifting along the fiber volume fraction axis. It is hypothesized that the shifts represent different "states" for the fiber bundle, which can be represented in the model by a single variable, the available fiber volume fraction V_a. It is then shown that all available aligned carbon fiber bundle data, including bulk compression, axial extension, and coupling be havior can be fit to the modified model by only adjusting V_a. In one case (the coupling be havior), the available fiber volume fraction was directly measured. Observations on how the "state" of the fiber bundle can be modified by the processing conditions are included. On the basis of this analysis, a simple, practical test to determine V_a is proposed.

Get full access to this article

View all access options for this article.

References

van Wyk, C.M. 1946. "Note on the Compressibility of Wool," Journal of Textile Institute, 37:T285-T292.

Treloar, L.R.G. 1956. "The Stress-Strain Properties of Multiply Cords, Part 1: Theory," Jourrral of Textile Institute , 56:T477-T488.

Hearle, J.W.S. 1969. "Theory of the Extension of Continuous Filament Yarns," Chapter 4 in Structural Mechanics of Fibers Yarns, and Fabrics, Vol. I, J. W. S. Hearle , P. Grosberg and S. Backer , eds., Wiley-Interscience, pp. 175-212.

De Jong, S. , J.W. Snaith and N.A. Michie. 1986. "A Mechanical Model for the Compression of Woven Fabrics," Textile Research Journal, 56(December):759-767.

Carnaby, G.A. 1980. "The Compression of Fibrous Assemblies, with Applications to Yarn Mechanics," in Mechanics of Flexible Fiber Assemblies, J. W. S. Hearle , J. J. Thwaites and J. Amirbayat , eds., Sijthoff and Noordhoff: Alphen aan den Rijn, The Netherlands, pp. 87-97.

Thwaites, J.J. 1980. "A Continuum Model for Yarn Mechanics," in Mechanics of Flexible Fiber Assemblies, J. W. S. Hearle , J. J. Thwaites and J. Amirbayat , eds., Sijthoff and Noordhoff : Alphen aan den Rijn, The Netherlands, pp. 87-97.

Curiskis, J.I. and G.A. Carnaby. 1985. "Continuum Mechanics of the Fiber Bundle," Textile Research Journal, 55(June):334-344.

Gutowski, T.G. , J. Kingery and D. Boucher. 1986. "Experiments in Composites Consolidation: Fiber Deformation," Proceedings of the Society of Plastic Engineers 44th Annual Technical Con-Jerence, Boston, May 1986, pp. 1316-1320.

Gutowski, T.G. 1985. "A Resin Flow/Fiber Deformation Model for Composites," SAMPE Quarterly (February).

10.

Hou, T.H. 1986. "A Resin Flow Model for Composite Prepreg Laminate Process ," Proceedings of the Society of Plastics Engineers 44th Annual Technical Conference, May 1986, Boston, pp. 1300-1305.

11.

Campbell, F.C. , A.R. Mallow , G.A. Blase and F.R. Muncaster. 1986. "Computer-Aided Curing of Composites," McDonnell Douglas. Corp., Eighth Quarterly Interim Technical Report to AFWAL, April 1986.

12.

Batch, G.L. and C.W. Macosko. 1988. "A Model for Two-Stage Fiber Deformation in Composite Processing," 20th International SAMPE Technical Conference, September 27-29, 1988, p. 641.

13.

Skartsis, L. and J.L. Kardos. 1990. "The Newtonian Permeability and Consolidation of Oriented Carbon Fiber Beds," Proceedings of American Society of Composites, p. 548.

14.

Kim, Y.R. , S. P. McCarthy and J.P. Fanucci. 1991. "Compressibility and Relaxation of Fiber Reinforcements during Composite Processing," Polymer Composites, 12(1):13-19.

15.

Cai, Z. and T.G. Gutowski. 1992. "The 3-D Deformation Behavior of a Lubricated Fiber Bundle," Journal of Composite Materials, 26(8):1207-1237.

16.

Gutowski. T.G. , Z Cai , S. Bauer , D. Boucher , J. Kingery and S. Wineman. 1987. "Consolidation Experiments for Laminate Composites," Journal of Composite Materials, 21(July):650-669.

17.

Cai, Z. 1986. "Molding Behavior of Composites," S. M. thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology (June).

18.

Kingery, J. 1985. "Composite Process Modeling: Consolidation of Aligned Fiber Assemblies," S. M. thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology (June).

19.

Fatur, S. 1990. "Consolidation Modeling of Thermoset Composites," S. M. thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology (May).

20.

Williams, J.G. , T.M. Donnellan and R.E. Trabocco. 1986. " Experimental Verification of Naval Air Development Center Composite Resin Flow Model," Report NADC-86048-60, April 1986, Naval Air Development Center, Warminster, PA 18974-5000.

21.

Cai, Z. 1990. "Simulation of the Manufacture of Closed Shape Composite Structures," Ph.D. thesis, Department of Mechanical Engineering, M.I.T. (April).

22.

McAir, F.C. Campbell, A. R. Mallow and G.A. Blase. 1985. "Computer-Aided Curing of Composites ," McDonnell Douglas Corp., Sixth Quarterly Interim Technical Report (October).

23.

Macri, G. 1988. "The Consolidation Behavior and Transverse Fiber Stiffness Behavior of Unidirectional Fiber Composites," S. B. thesis , Department of Mechanical Engineering, M.I.T. (May).

24.

Skartsis, L. , B. Khomaini and J.L. Kardos. "Resin Flow through Fiber Beds during Composite Manufacturing Processes: Part II—Numerical and Experimental Studies of Newtonian Flow through Ideal and Actual Fiber Beds," submitted to Polymer Composites.