Anelastic Deformation of a Thermoplastic-Matrix Fiber Composite at Elevated Temperature;Part III: Structure and Thermomechanical Properties of AS4/PACM-12 Composite
Restricted accessResearch articleFirst published online September, 1993
Anelastic Deformation of a Thermoplastic-Matrix Fiber Composite at Elevated Temperature;Part III: Structure and Thermomechanical Properties of AS4/PACM-12 Composite
Structural characterization of AS4-graphite fiber/PACM-12§ matrix com posites was conducted using Differential Scanning Calorimetry (DSC) and Wide-Angle X-Ray Diffraction (WAXD) analyses. The DSC results indicate the significant effect of processing variables on the morphology, microstructure and crystallmity of the fiber rein forced semicrystalline thermoplastic matrix prepreg and unidirectional laminates. From WAXD results the crystallinity was determined. Time-temperature dependent thermo mechanical properties of the laminates were evaluated using dynamic mechanical spec troscopy and creep compliance measurements. Dynamic mechanical spectra revealed the matrix-dominated time-temperature dependent behavior of the laminate under torsional loading. Elevated temperature creep compliance in the longitudinal direction showed time- temperature independent behavior whereas transverse creep deformation was found to be significantly time-temperature-stress dependent.
Get full access to this article
View all access options for this article.
References
1.
Chen, A. W-L , A. Miyase, P.H. Geil and S.S. Wang.1993. " Anelastic Deformation of a Thermoplastic-Matrix Fiber Composite at Elevated Temperature, Part I Neat Resin Structure Characterization," Journal of Composite Materials, 27(9):862-885
2.
Miyase, A., A.W.-L. Chen, P.H. Geil and S.S. Wang.1993. "Anelastic Deformation of a Thermoplastic-Matrix Fiber Composite at Elevated Temperature, Part II: Time-Temperature Dependent Matrix Behavior," Journal of Composite Materials, 27(9):886-907.
3.
Lustiger, A.1984 "Considerations in the Utilization of Semicrystalline Thermoplastic Advanced Composite," SAMPE Journal, 20(3).13-16.
4.
Waddon, A.J. , M.J. Hill, A. Keller and D.J. Blundell.1987. "On the Crystal Texture of Linear Polyaryls (PEEK, PEK and PPS," Journal of Materials Science, 22:1773-1784.
5.
Blundell, D.J. , R.A. Crick, B. Fife, J. Peacock, A. Keller and A. Wadden.1989 " Spherulitic Morphology of the Matrix of Thermoplastic PEEK/Carbon Fiber Aromatic Polymer Composites ," Journal of Materials Science, 24:2057-2064.
6.
Tung, C.M. and P.J. Dynes.1987. "Morphological Characterization of Polyetheretherketone-Carbon Fiber Composites," Journal of Applied Polymer Science, 33:505-520.
7.
Lee, W.J., B.K. Fukai, J.C. Seferis and I.Y. Chang.1988. "Crystallization and Processing Behavior of the Polyamide J-1 Polymer and Composites Reinforced with Kevlar Fiber," Composites, 19(6).473-480.
8.
Alamo, R. and L. Mandelkern.1986. "Origins of Endothermic Peaks in Differential Scanning Calorimetry," Journal of Polymer Science, B. Polymer Physics, 24:2087-2105.
9.
Todoki, M. and T. Kawaguchi.1977 "Origins of Double Melting Peaks in Drawn Nylon 6 Yarns," Journal of Polymer Science, Physics Edition , 25:1067-1075.
10.
Bell, J.P. and J.H. Dumbleton.1969. "Relation between Melting Behavior and Physical Structure in Polymers," Journal of Polymer Science , Part A-2, 7:1033-1057.
11.
Blundell, D.J. and B.N. Osborn.1983 "The Morphology of Poly(aryl-ether-ether-ketone ," Polymer, 24:953-958.
12.
Lee, Y. and R.S. Porter.1986. "Crystallization of Poly(etheretherketone) (PEEK) in Carbon Fiber Composites," Polymer Engineering and Science, 26(9):633-639.
13.
Seferis, J.C.1986. "Polyetheretherketone (PEEK): Processing-Structure and Properties Studies for a Matrix in High Performance Composites," Polymer Composite, 7(3):158-169.
14.
Ostberg, G.M.K. and J.C. Seferis.1987. 'Annealing Effects on the Crystallinity of Polyetheretherketone (PEEK) and Its Carbon Fiber Composite ," Journal of Applied Polymer Science, 33:29-39.
15.
Anderson, D. , S. Kumar and W.W. Adams1985 "Wide Angle X-Ray Diffraction as a Tool to Examine the Morphology of Semicrystalline Thermoplastic Matrix Composites," Polymer Preprints, 26175
16.
Blundell, D.J. , J.M. Chalmers, M.W. Mackenzie and W.F. Gaskin1985 " Crystalline Morphology of the Matrix of PEEK-Carbon Fiber Aromatic Polymer Composites I. Assessment of Crystallinity," SAMPE Quarterly , 6(4)22-30
17.
James, M.R. and D.P. Anderson.1986. "Determination of Crystallinity in Graphite Fiber Reinforced Thermoplastic Composites," in Advances in X-Ray Analysis, C. S Barrett, J B. Cohen, J Faber, Jr , R Jenkins, D E Leyden, J C. Russ and P K. Predecki, eds., New York, NY: Plenum Press, pp 291-303
18.
Peacock, J.A. , B. Fife, E. Nield and C.Y. Barlow.1986. "A Fiber-Matrix Interface Study of Some Experimental PEEK/Carbon-Fiber Composites," in Composite Interface , H. Ishida and J L. Koenig, eds , New York, NY: Etsevier Science Publishing, pp. 143-149
19.
Peacock, J.A. , B. Fife, E. Nield and R.A. Crick.1986. " Examination of the Morphology of Aromatic Polymer Composite (APC-2) Using an Etching Technique ," Composite Interface, H Ishida and J. L Koenig , eds , New York, NY. Elsevier Science Publishing, pp 299-306
20.
Ashton, J.E. , J.C. Halpin and P.H. Petit1969 Chapter 5 in Primer on Composite Materials. Lancaster, PATechnomic Publishing Co., Inc.
21.
Wang, S.S. , E.C. Klang, A. Dasgupta and A. Miyase. In preparation. "Viscoelastic Shear of a Thermoplastic-Matrix Fiber Composite at Room and Elevated Temperature."
22.
Miyase, A. and S.S. Wang In preparation. "Transverse Creep of a Thermoplastic Matrix Composite at Elevated Temperatures"
