Effect of Stitching on the Mechanical and Impact Properties of Woven Laminate Composite

Abstract

Mechanical and impact-resistant properties of stitched woven laminate composite have been studied. The S-2 Glass/Polyester, Kevlar/PVB-Phenol and Spectra/Vinylester composites were stitched at different stitch densities to improve its mechanical and impact properties of the composite. Both chain and plain stitches were used for reinforcing the laminate in the Z-axis of the composite. The mechanical properties of woven laminate composite were improved at the optimum stitch density compared to those of conventional unstitched one. Energy absorption capability of stitched composite was also higher than that of unstitched composite, and the stitched composite showed a significant increase in energy absorption capability under repeated impact. The damaged areas caused by the repeated impact or by the penetration of projectile were far smaller in the stitched composite than in the unstitched laminate one. The stitched composite showed about 10% improvement in ballistic efficiency over the conventional woven laminate composite at the optimum stitch design.

Keywords

woven laminate composite stitching damaged area optimum stitch density ballistic efficiency

Get full access to this article

View all access options for this article.

References

1. Ko, F. K. and F. L. Scardino . 1982. "Magnaweave Multidimensional Fabrics; Structure, Properties and End Uses," Textile Technology Forum.

2. Popper, P. and R. McConell . 1983. "A New 3-D Braid for Integrated Parts Manufacturing and Improved Delamination Resistance-The 2-Step Process," 32nd International SAMPE Symposium and Exhibition, p. 92.

3. Mayadas, A. , C. Pastore and F. K. Ko . 1985. "Textile and Shear Properties of Composite by Various Reinforcement Concepts," 30th International SAMPE Symposium, pp. 1284-1293.

4. Stover, E. R. , W. C. Mark , I. Marfowitz and W. Mueller . 1971. "Preparation of an Omniweave-Reinforced Carbon-Carbon Cylinder as a Candidate for Evaluation and Advanced Heat Shield Screen Program," AFML-TR-70-283.

5. Pelstring, R. M. and R. C. Madan . 1989. "Stitching to Improve Damage Tolerance of Composites,"

34th International SAMPE Symposium.

6. Dexter, H. B. , J. G. Funk and S. J. Lubowinski . 1986. "Experimental Evaluation of Stitched Graphite/Epoxy Composites in 3-D Composite Materials," NASA CP-2420.

7. MIL-STD-662E. 1984. "Ballistic Acceptance Test Method for Personal Armor Material"