Measurement of the Degree of Cure of Carbon Fiber Epoxy Composite Materials

Abstract

In this study, a dielectric cure monitoring system which consists of an electric circuit, a sensor and a personal computer was developed to on-line monitor the dielectric properties of carbon fiber epoxy composite materials. Also, the kinetic model of carbon fiber epoxy composite materials was developed by curve fitting of the differential scanning calorimetry (DSC) data.

The start and end points of cure and the relationship between the dissipation factor and the degree of cure were obtained by comparing the dissipation factor from the dielectric properties with the degree of cure from the DSC data. The relationship between the dissipation factor and the degree of cure was tested under various temperature profiles.

Keywords

degree of cure DSC (differential scanning calorimetry)kinetic model dielectrometry dissipation factor (D)

Get full access to this article

View all access options for this article.

References

1. Mallick, P. K. 1988. Fiber Reinforced Composites, New York: Marcel Dekker, Inc., Chapter 5.

2. Yalof, S. A. and D. C. Brisbin . 1972. "The Relationship between Dielectric and Mechanical Properties of Polymers," Proceedings of the 4th International SAMPE Symposium, pp. 391-397.

3. Hudson, D. 1974. "The Use of Automatic Dielectrometry for Autoclave Moulding of Low Void Composites," Composites, pp. 247-252.

4. Bromberg, M. L. 1986. "Application of Dielectric Measurements to Quality Control," Proceedings of the 44th Annual Technical Conference, Society of Plastics Engineers, pp. 403-406.

5. Bromberg, M. L. , D. R. Day , H. L. Lee and K. A. Russell . 1986. "New Applications for Dielectric Monitoring and Control," Proceedings of the 2nd Conference of Advanced Composites, pp. 307-311.

6. Kranbuehl, D. , M. Hoff , P. Haverty , A. Loos and T. Freeman . 1988. "Insitu Measurement and Control of Processing Properties of Composite Resins in a Production Tool," Proceedings of the 33rd International SAMPE Symposium, pp. 1276-1284.

7. Day, D. R. 1986. "Cure Control: Strategies for Use of Dielectric Sensors," Proceedings of the 31st International SAMPE Symposium, pp. 1095-1103.

8. Day, D. R. 1990. "Degree of Cure in 3501-6 Epoxy Graphite: A Comparison of Dielectric Cure Index with Model Predictions," Proceedings of the 35th International SAMPE Symposium, pp. 2289-2297.

9. Ungarish, M. , R. Joseph , J. Vittoser and S. Kenig . 1990. "Cure Cycle Optimization of Composites by Dielectric Measurements," Composites, 21:481-486.

10.

10. Maistros, G. M. and C. B. Bucknall . 1994. "Modeling the Dielectric Behavior of Epoxy Resin Blends during Curing," Polymer Engineering and Science, 34:1517-1528.

11.

11. Micromet Company Catalog: Micromet Instruments, Inc., 26 Landsdowne St., #150 Cambridge, MA 02139-9751, USA.

12.

12. Dek Dyne Company Catalog: Dek Dyne, Inc., 201 Harrison Avenue, Williamsburg, VA 23185, USA.

13.

13. Lee, W. I. , A. C. Loos and G. S. Springer . 1982. "Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resin," Journal of Composite Materials, 16:510-520.

14.

14. Dusi, M. R. , W. I. Lee , P. R. Ciriscioli and G. S. Springer . 1987. "Cure Kinetics and Viscosity of Fiberite 976 Resin," Journal of Composite Materials, 21:243-261.

15.

15. Chiao, L. and R. E. Lyon . 1990. "A Fundamental Approach to Resin Cure Kinetics," Journal of Composite Materials, 24:739-752.

16.

16. Dutta, A. and M. E. Ryan . 1979. "Effect of Fillers on Kinetics of Epoxy Cure," Journal of Applied Polymer Science, 24:635-649.

17.

17. Kamal, M. R. 1974. "Thermoset Characterization for Moldability Analysis," Polymer Engineering and Science, 14:231-239.

18.

18. Buchanan, R. C. 1986. Ceramic Materials for Electronics. New York: Marcel Dekker, Inc., Chapter 1.