Local Effects in Stiffened Composite Tubes under Generalized Plane Deformation

Abstract

A two-dimensional, curvilinear, isoparametric, finite element is used to study local curvatures and interlaminar stresses in laminated composite tubes with laminated stiffeners running the length of the tube. The generalized plane problem is analyzed by considering a generic transverse cross section of the stiffened tube to provide three-dimensional states of stress. Discrete layers of the tube and the stiffener are modeled explicitly, providing an accurate and detailed representation of local effects. Cross-ply, angle-ply and general laminate configurations are studied for axial, torsional and internal pressure loadings that are constant along the length of the tube. It is shown that local curvatures and interlaminar stresses can be significant and variable and depend upon the laminate configuration and loading conditions.

Get full access to this article

View all access options for this article.

References

ABAQUS . 1989. Finite Element Package Ver. 4.8 Users Manual, Hibbitt, Karlsson & Sorensen, Inc.

Fenton, D. C. , J. H. Starnes, Jr. and C. T. Herakovich . 1993. Interlaminar Stresses in Stiffened Composite Panels, Applied Mechanics Program Report AM-93-01, University of Virginia, Charlottesville, VA.

Herakovich, C. T. 1981. "On the Relationship between Engineering Properties and Delamination of Composite Materials," J. Composite Materials, 15(12):441-447.

Herakovich, C. T. 1989."Free Edge Effects in Laminated Composites," Herakovich and Tarnopol'skii (eds.), Chapter 4, Handbook of Composites, Vol. 2, Structure and Design, North Holland, pp. 188-230

Herakovich, C. T. 1998. Mechanics of Fibrous Composites, John Wiley and Sons, Inc. New York.

Hersh, C. L. and C. T. Herakovich . 1994a. A Two-Dimensional Cylindrical Finite Element for Three-Dimensional Analysis of Stiffened Composites, Applied Mechanics Program Report AM-94-02, University of Virginia, Charlottesville, VA.

Hersh, C. L. and C. T. Herakovich . 1994b. "A 2-D Element for Generalized Plane Problems with Cylindrical Anisotropy," submitted for publication.

Hyer, M. W. and C. Q. Rousseau . 1987. "Thermally Induced Stresses and Deformations in Angle-ply Composite Tubes," J. Composite Materials, 21(5):454-480.

Lekhnitskii, S. G. 1963. Theory of Elasticity of an Anisotropic Elastic Body, Holden-Day, Inc., San Francisco.

10.

Pagano, N. J. 1989. Interlaminar Response of Composite Materials, N. J. Pagano (ed.), Composite Materials Series, 5, Elsevier, Amsterdam.

11.

Zienkiewicz, O. C. and F. C. Scott . 1972, "On the Principle of Repeatability and Its Application in Analysis of Turbine and Pump Impellers," Int. J. Num. Meth. Engrs., 9:445-452.