Abstract
The pellicle serves as a multifunctional protective layer, providing, e.g., lubrication and remineralization and also acting as a diffusion barrier. In addition, since the formation of the pellicle precedes the adhesion of micro-organisms, it is also important as a conditioning film. We present a novel approach to study the influence of the water wettability of solid surfaces on the strength of adsorbed salivary films. It is based on studying the wear resistance of the films with an atomic force microscope operated in the friction force spectroscopy mode. This methodology provides the strength of the films in terms of the forces needed for breaking and removing them. Our results indicate that these forces are highly dependent on the water wettability of the underlying substrata, decreasing with increasing hydrophobicity. Thus, this study provides valuable information for the design of materials exposed in the oral cavity, i.e., materials that will minimize plaque formation and be easy to clean.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
