A Constitutive Model for Blended Yarn Extension with Fragmented Low-Elongation Fibers

Abstract

A simple micromechanical model is developed for the interactions in a parallel square-stacked mixed array of elastic fibers representing the microstructure of a blended yarn undergoing axial extension. The mixed array consists of a small fraction of relatively high modulus, low elongation-to-break (LE) fibers dispersed among high elongation-to-break ((HE) fibers. The LE fibers are assumed to break into fragments, and the LE fiber fragments are assumed to slip relative to neighboring fibers in regions near the fragment tips. The fiber array experiences lateral compression arising from the remote tension on the twisted yarn, and frictional forces acting at slipping fiber-to-fiber contact surfaces are assumed to obey Amontons' law. Solutions of a dimensionless boundary value problem for deformations in a unit cell of the fiber array are presented. Dimensionless parameters involving the constituent LE and HE fiber properties are identified and their influence on blended yarn tensile behavior is illustrated.

Get full access to this article

View all access options for this article.

References

1. Curtin, W. A. , Theory of Mechanical Properties of Ceramic Matrix Composites, J. Am. Ceram. Soc. 74, 2837–2845 (1991).

2. Curtin, W. A. , The “Tough” to Brittle Transition in Brittle Matrix Composites, J. Mech. Phys. Solids 41, 217–245 (1993).

3. Daniels, H. E. , The Statistical Theory of Strength of Bundles of Threads, Proc. R. Soc. Lond. A 183, 405–435 (1945).

4. Fukuda, H. , and Chou, T. W. , Stress Concentrations in a Hybrid Composite Sheet, J. Appl. Mech. 50, 845–848 (1983).

5. Galilei, Galileo , “Dialogues Concerning Two New Sciences,” Leyden (1638), translated by A. De Salvio and A. Fabaro , Evanston, IL, 1914.

6. Godfrey, T. A. , and Rossettos, J. N. , The Onset of Tear Propagation at Slits in Stressed Uncoated Plain Weave Fabrics, J. Appl. Mech. 66, 926–933 (1999).

7. Hearle, J. W. S. , Grosberg, P. , and Backer, S. , “Structural Mechanics of Fibers, Yarns, and Fabrics,” Wiley-Inter-science, NY, 1969.

8. Hedgepeth, J. M., Stress Concentrations in Filamentary Structures, NASA Technical Note D-882, 1961.

9. Hedgepeth, J. M. , and Van Dyke, P. , Local Stress Concentrations in Imperfect Filamentary Composite Materials, J. Compos. Mater. 1, 294–309 (1967).

10.

10. Hui, C.-Y. , Phoenix, S. L. , and Shia, D. , Statistics of Fragmentation in a Single-Fiber Composite under Matrix Yielding and Debonding with Application to the Strength of Multi-Fiber Composites, Compos. Sci. Technol. 60, 2107–2128 (2000).

11.

11. Kawabata, S., “Measurements of Anisotropic Mechanical Property and Thermal Conductivity of a Single Fiber for Several High Performance Fibers,” presented at the Fourth Japan-U.S. Conference on Composite Materials, June 27-28, 1988, Washington, DC.

12.

12. Kemp, A. , and Owen, J. D. , The Strength and Behaviour of Nylon/Cotton Blended Yarns Undergoing Strain, J. Textile Inst. 46, T684–T698 (1955).

13.

13. Kilby, W. F. , The Mechanical Properties of Twisted Continuous-Filament Yarns, J. Textile Inst. 55, T589–T632 (1964).

14.

14. Manders, P. W. , and Bader, M. G. , The Strength of Hybrid Glass/Carbon Fibre Composites, Part 1: Failure Strain Enhancement and Failure Mode, J. Mater. Sci. 16, 2233–2245 (1981).

15.

15. Monego, C. J., The Mechanics of Rupture of Cotton-Dacron Yarns, Masters thesis, M.I.T., Cambridge, MA, 1963.

16.

16. Monego, C. J. , and Backer, S. , Tensile Rupture of Blended Yarns, Textile Res. J. 38, 762–766 (1968).

17.

17. Morton, W. E. , and Hearle, J. W. S. , “Physical Properties of Textile Fibers,” Halsted Press, NY, 1975.

18.

18. Neumeister, J. M. , A Constitutive Law for Continuous Fiber Reinforced Brittle Matrix Composites with Fiber Fragmentation and Stress Recovery, J. Mech. Phys. Solids 41, 1383–1404 (1993).

19.

19. Pan, N. , and Postle, R. , The Tensile Strength of Hybrid Fibre Composites: A Probabilistic Analysis of the Hybrid Effects, Phil. Trans. R. Soc. Lond. A. 354, 1875–1897 (1996).

20.

20. Phoenix, S. L. , Statistical Theory for the Strength of Twisted Fiber Bundles with Applications to Yarns and Cables, Textile Res. J. 49, 407–423 (1979).

21.

21. Phoenix, S. L. , Ibnabdeljalil, M. , and Hui, C.-Y. , Size Effects in the Distribution for Strength of Brittle Matrix Fibrous Composites, Int. J. Solids Struct. 34, 545–568 (1996).

22.

22. Pierce, F. T. , Tensile Tests for Cotton Yarns, V: ‘The Weakest Link’ Theorems on the Strength of Long and of Composite Specimens, J. Textile Inst. 17, 355 (1926).

23.

23. Pitt, R. E. , and Phoenix, S. L. , On Modelling the Statistical Strength of Yarns and Cables Under Localized Load-Sharing Among Fibers, Textile Res. J. 51, 408–425 (1981).

24.

24. Realff, M. L. , Pan, N. , Seo, M. , Boyce, M. C. , and Backer, S. , A Stochastic Simulation of the Failure Process and Ultimate Strength of Blended Continuous Yarns, Textile Res. J. 70(5), 415–430 (2000).

25.

25. Thwaites, J. J. , The Elastic Deformation of a Rod with Helical Anisotropy, Int. J. Mech. Sci. 19, 161–168 (1976).

26.

26. Thwaites, J. J. , A Continuum Model for Yarn Mechanics, in “Mechanics of Flexible Fibre Assemblies,” J. W. S. Hearle , J. J. Thwaites , and J. Amirbayat , Eds., Sijthoff & Noordhoff, Alphen aan den Rijn, The Netherlands, 1980, pp. 87–112.