Simulating Cavitation and Hydraulic Flip Inside Hydroentangling Nozzles

Abstract

Hydroentangling owes its success to the peculiar properties of coherent water jets. For hydroentangling to be feasible at higher pressures, it is extremely important that water jets maintain their collimation for an appreciable distance downstream of the nozzle. How ever, water-jet breakup accelerates at high pressures. Recent studies have shown that cavitation severely affects the integrity of high-pressure water jets. Investigating cavita tion experimentally is not trivial. Computational fluid dynamics simulations offer appro priate tools as a first step. This paper discusses the results of an unsteady-state simulation, which shows the inception and time-evolution of a cavitation cloud inside a hydroentan gling nozzle. Under certain conditions, the cavity cloud extends to the nozzle outlet, resulting in the so-called hydraulic flip. Once hydraulic flip occurs, cavitation suddenly vanishes because the downstream air moves upward into the nozzle and fills the cavity. This air envelops the water flow inside the nozzle, which results in the depletion of cavitation-induced instabilities from the jet surface and elongates the jet breakup length. Moreover, our simulations reveal the approximate time scales of cavity growth through the nozzle. This information is highly relevant for experimental visualization of nozzle cavitation. The discharge and velocity coefficient obtained from the simulation are in a good agreement with published experimental data.

Get full access to this article

View all access options for this article.

References

Arcoumanis, C. , Gavaises, M. , Nouri, M. , Abdul-Wahab, E. , and Horrocks, R.W. , Analysis of the Flow in the Nozzle of a Vertical Multi Hole Diesel Engine Injector, SAE paper no. 980811.

Badock, C. , Wirth, R. , Fath, A. , and Leipertz, A. , Investigation of Cavitation in Real Size Diesel Injection Nozzles , Int. J. Heat Fluid Flow 20, 538-544 (1999).

Begenir, A. , Vahedi Tafreshi, H. , and Pourdeyhimi, B. , Effects of Nozzle Geometry on Hydroentangling Water Jets: Experimental Study , Textile Res. J. 74, 178-184 (2004).

Bunnell, R.A. , Heister, S.D. , Yen , C. , and Collicott, S.H. , Cavitatiog Injector Flows: Validation of Numerical Models and Simulations of Pressure Atomizers, Atomization Sprays 9, 445-465 (1999).

Bemtsen, G.S. , Kjeldsen, M. , and Arndt, R.E. , Numerical Modeling of Sheet and Tip Vortex Cavitation with Fluent 5, CAV2001, 2001.

Chaves, H. , Knapp, M. , Kubitzek, A. , Obermeier, F. , and Schneider, T. , Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles, SAE papers 1995-0290.

Dumont, N. , Simonin, O. , and Habchi, C. , Numerical Simulation of Cavitating Flows in Diesel Injectors by a Homogeneous Equilibrium Modeling Approach, "Proc. CAV2001," 2001.

Fluent 6 user guide, 2002.,

Ghassemieh, E. , Versteeg, H.K. , and Acar, M. , Effect of Nozzle Geometry on the Flow Characteristics of Hydroentangling Jets, Textile Res. J. 73, 5 (2003).

10.

Hiroyasu, H. , Arai, M. , and Shimizu, M. , Breakup Length of a Liquid Jet and Internal Flow in a Nozzle, in "Proc. ICLASS," ( 1991), pp. 123-133.

11.

Hiroyasu, H. , Spray Breakup Mechanism from the Hole-Type Nozzle and Its Applications, Atomization Sprays 10, 511-521 (2000).

12.

Knapp, R.T. , Daily, J.W. , and Hammitt, F.G. , "Cavitation," McGraw-Hill Inc. NY, 1970.

13.

Ohm, T.R. , Senser, D.W. , and Lefebvre, H. , Geometrical Effects on Discharge Coefficients for Plain-orifice Atomizers , Atomization Sprays 1, 137-153 (1991).

14.

Ramamurthi, K. , and Nandakumar , K. , Characteristics of Flow through Small Sharp-edged Cylindrical Orifices, Flow Measure. Instrument. 10, 133-143 (1999).

15.

Ramamurthi, K. , and Patnaik, S.R. , Influence of Periodic Disturbances on Inception of Cavitation in Sharp-edged Orifices, Exper. Fluids 33, 720-727 (2002).

16.

Roth, K.W. , and Massah, H. , Prediction of Cavitation Damage; A Comparison of Computational Fluid Dynamics and Experimental Results, in "Proc. ASME/JSME Fluids Engineering Division Summer Meeting, " San Francisco, CA July 18-22, 1999.

17.

Schmidt, D.P. , Rutland, C.J. , Corradini , M.L. , Roosen, P. , and Genge, O. , Cavitation in Two-dimensional Asymmetric Nozzles, SAE Paper no. 1999-01-0518.

18.

Tamaki, N. , Shimizu, M. , Nishida, K. , and Hiroyasu, H. , Effects of Cavitation and Internal Flow on Atomization of a Liquid Jet, Atomization Sprays 8, 179-197 (1998).

19.

Tamaki, N. , Shimizu, M. , and Hiroyasu, H. , Enhancement of the Atomization of a Liquid Jet by Cavitation in a Nozzle Hole , Atomization Sprays 11, 125-137 (2001).

20.

Vahedi Tafreshi, H. , Pourdeyhimi, B. , Holmes , R. , and Shiffler, D. , Simulating and Characterizing Water Flows Inside Hydroentangling Orifices, Textile Res. J. 73(3), 256-262 (2003).

21.

Vahedi Tafreshi, H. , and Pourdeyhimi , B. , Simulating Flow Dynamics in Hydroentangling Nozzles: Effect of Cone Angle and Nozzle Aspect Ratio, Textile Res. J. 73(8) 700-704 (2003).

22.

Vahedi Tafreshi, H. , and Pourdeyhimi , B. , The Effects of Nozzle Geometry on Waterjet Breakup at High Reynolds Numbers, Experi. Fluids 35(4), 364-371 (2003).

23.

Versteeg, H.K. , and Malalasekera , W. , "An Introduction to Computational Fluid Dynamics: The Finite Volume Method, Longman, Malaysia, 1995.

24.

Xu, C. , Bunnell, R.A. , and Heister, S.D. , On the Influence of Internal Flow Structure on the Performance of a Plain-Orifice Atomizer, Atomization Sprays 11, 335-350 (2001).

25.

Xu, C. , and Heister, S.D. , Modeling Cavitating Venturi . Flows, J. Propulsion Power 18(6), 1227-1234 (2002 ).