Decrimping Behavior of Uncoated Plain-woven Fabrics Subjected to Combined Biaxial Tension and Shear Stresses

Abstract

Tension structures continue to be of increasing importance to military applications requiring minimal weight, small packaging volumes and enhanced deployment operations. Presently, design methods for inflated fabric structures are not well established. Analysis tools for their efficient design lag behind those for conventional structures, partly because woven fabrics do not behave as a continuum. Changes in fabric architecture occur with loading and lead to several sources of nonlinear response. In particular, effective constitutive relationships must be developed that institute the combined effects of biaxial tensile stresses from inflation and shear stresses from bending for use in structural models. Through analysis and experiment, this study addressed these architectural changes, such as crimp interchange, and their effects on the mechanical properties of uncoated plain-woven fabrics. This was accomplished through meso-scale finite element analyses and material tests using a recently developed experimental fixture. The fixture facilitated testing of a wide variety of fabrics (woven, braided, knitted, etc.) subjected to combined biaxial tensile and shear stresses. The meso-scale models and swatch-level test results confirmed that: (1) crimp interchange profoundly influenced the fabric elastic and shear stiffnesses, as changes in crimp heights occurred with increasing biaxial tensions, (2) the shear modulus was highly dependent upon the biaxial tensions and compaction of the tows at the crossover points and (3) the shear modulus was highly nonlinear and was not monotonic with rotation and shear force. This study also presents analytical and experimental methods to ascertain the elastic and shear moduli of woven fabrics for use in evaluating the performance of air beams.

Get full access to this article

View all access options for this article.

References

Pierce, F.T. , The Geometry of Cloth Structure, J. Textile Inst. 28(3), T45—T96 (1937).

Hearle, J.W.S. , Grosberg, P. , and Backer, S. , “Structural Mechanics of Fibers, Yarns and Fabrics,” John Wiley and Sons Inc., New York, USA (1969).

Freeston, W.D. , Platt, M.M. , and Schoppee , M.M. , Mechanics of Elastic Performance of Textile Materials, Part XVIII, Stress-strain Response of Fabrics Under Two-dimensional Loading, Textile Res. J. 37, 948—975 (1967).

Sidhu, R.M.J.S. , Averill, R.C. , Riaz, M. , and Pourboghart , F. , Finite Element Analysis of Textile Composite Preform Stamping, J. Compos. Struct. 52, 483—497 (2001).

Boise, P. , Gasser, A. , and Hivet, G. , Analysis of Fabric Tensile Behaviour: Determination of the Biaxial Tension-strain Surfaces and their Use in Forming Simulations, Composites Part A 32, 1395—1414 (2001).

Farboodmanesh, S. , Chen, J. , Mead, J.L. , and White, K. , “ Effect of Construction on Mechanical Behavior of Fabric Reinforced Rubber,” Rubber Division Meeting, American Chemical Society, Pittsburgh, PA, USA (2002).

Steeves, E.C. , “ Mathematical Modeling of the Biaxial Stress-strain Behavior of Fabrics,” Technical Report 82-009, United States Army Natick Research and Development Laboratories, Natick, MA, USA (1982).

Main, J.A. , Peterson, S.W. , and Strauss, A.M. , Load-deflection Behavior Of Space-based Inflatable Fabric Beams, J. Aerosp. Eng. 7(2), 225—238 ( 1994).

Main, J.A. , Peterson, S.W. , and Strauss, A.M. , Beam-type Bending of Space-based Inflated Membrane Structures, J. Aerosp. Eng. (8)2, 120—125 ( 1995).

10.

Sagar, T.V. , Potluri, P. , and Hearle, J.W.S. , Meso-scale Modeling of Interlaced Fibre Assemblies Using Energy Method, Comput. Mater. Sci. 28, 49—62 (2003).

11.

King, M. , and Socrate, S. , “ A Shell Formulation to Model the Three-dimensional Deformation Response of Woven Fabrics,” ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, USA (2004).

12.

Cavallaro, P. , Sadegh, A. , and Johnson, M. , Mechanics of Plain-woven Fabrics for Inflated Structures, J. Compos. Struct. 61(4), 375—393 (2003).

13.

Quigley, C. , Cavallaro, P. , Johnson, A. , and Sadegh, A. , “ Advances in Fabric and Structural Analyses of Pressure Inflated Structures,” Conference Proceedings of the 2003 ASME International Mechanical Engineering Congress and Exposition (2003).

14.

ABAQUS Version 6.4, ABAQUS Inc., Pawtucket, RI, USA (2003).

15.

Cavallaro, P. , Sadegh, A. , and Quigley, C. , “Combined In-plane Shear and Multi-axial Tension or Compression Testing Apparatus,” U.S. Patent No. 6,860,156 (2005).