Gray Relational Analysis Approach for the Optimization of Process Setting in Textile Calendering

Abstract

Calenders are mainly applied in fabric surface processing to improve the surface gloss. This paper proposes an advanced quality control strategy for calendering, employing the gray relational analysis based on Taguchi method to plan a series of calendering experiments, setting the robust process parameters for calender. Our study focused on the use of gray relational analysis to deal with a fundamental limitation of the standard Taguchi approach in respect of optimization problems having multiple quality characteristics. The quality characteristics included reflectance, water vapor permeability, and color difference of calendered fabrics. In order to estimate the optimization parameters with multiple quality characteristics, gray relational analysis was also incorporated to set quality characteristics as reference sequences and decide the optimal parameter combinations. The results showed that the calendered qualities were greatly improved and effectively determined the process parameters through this study.

Keywords

calendering gray relational analysis Taguchi method

Get full access to this article

View all access options for this article.

References

Kuo, C.F.J. , and Fang, C.C. , An Entire Strategy for Control of a Calender Roller System. Part I: Dynamic System Modeling and Controller Design, Textile Res. J. 77, 343-352 (2007).

Zobel, S. , Maze, B. , Tafreshi Vahedi, H. , Wang, Q. , and Pourdeyhimi, B. , Simulating Permeability of 3-D Calendered Fibrous Structures, Chem. Eng. Sci. 62, 6285-6296 (2007 ).

Mahapatra, S.S. , Patnaik, A. , and Satapathy, A. , Taguchi Method Applied to Parametric Appraisal of Erosion Behavior of GF-reinforced Polyester Composites, Wear 265(1/2), 214- 222 (2008).

Rout, B.K. , and Mittal, R.K. , Tolerance Design of Robot Parameters Using Taguchi Method, Mech. Syst. Signal Process. 20(8), 1832-1852 (2006).

Fowlkes, W.Y. , and Creveling, C.M. , "Engineering Methods for Robust Product Design, Using Taguchi Methods in Technology and Product Development," Addison-Wesley , Massachusetts (1995).

Ross, P.J. , "Taguchi Techniques for Quality Engineering," Second Edition, McGraw-Hill, New York ( 1996).

Lu, D. , and Antony, J. , Optimization of Multiple Responses Using a Fuzzy-rule Based Inference System , Int. J. Prod. Res. 40(7), 1613-1625 (2002).

Debabrata, M. , Surjya, K.P. , and Partha, S. , Back Propagation Neural Network Based Modeling of Multi-response of an Electrical Discharge Machining Process, Int. J. Knowl. Based Intell. Eng. Syst . 11(2), 105-113 (2007).

Antony, J. , Anand, R.B. , Kumar, M. , and Tiwari, M.K. , Multiple Response Optimization Using Taguchi Methodology and Neuro-fuzzy Based Model, J. Manuf. Technol. Manage. 17(7), 908-925 (2006).

10.

Deng, J. , "Gray Control System," Huazhong Engineering College Press, Wuhang, China (1985).

11.

Chan, J.W.K. , and Tong, T.K.L. , Multi-criteria Material Selections and End-of-life Product Strategy: Gray Relational Analysis Approach, Mater. Des. 28(5), 1539-1546 (2007 ).

12.

Morán, J. , Granada, E. , Míguez, J.L. , and Porteiro, J. , Use of Gray Relational Analysis to Assess and Optimize Small Biomass Boilers, Fuel Process. Technol. 87(2), 123-127 (2006).

13.

Xin, G. , You, H. , and Xiao, Y. , Gray Track-to-track Correlation Algorithm for Distributed Multitarget Tracking System, Signal Process . 86(11), 3448-3455 (2006 ).

14.

Deng, J. , Introduction to Gray System Theory, J. Gray Syst. 1, 1-24 (1989).

15.

Guo, H. , Identification Coefficient of Relational Grade , Fuzzy Math. 15(2), 55-58 (1985).