This paper presents a chemical and physical analysis of the surface of polypyrrole- coated electrically conductive textiles and a study of the adhesion of polypyrrole- coated nylon fibers to epoxy using the microbond test. The chemical composition of the surface of the conductive polymer coating was determined using x-ray photoelectron spectroscopy. Surface textures of polypyrrole-coated polyester, nylon, and glass textiles were observed using the scanning electron microscope, and dynamic contact angle measurements revealed the wetting character of the conductive coating. Thermo gravimetric analysis mass spectrometry was used to test the thermal stability of the polypyrrole-coated nylon fiber.
Armes, S.P., Optimum Reaction Conditions for the Polymerization of Pyrrole by Iron (III) Chloride in Aqueous Solution, Synth. Met.20, 365-371 (1987).
3.
Bjorklund, R.B. , and Lundstrom, I., Some Properties of Polypyrrole-Paper Composites , J. Electron. Mat.13, 211-229(1984).
4.
Chou, C.T., and Penn, L.S., Chemical Bonding and Physical Interaction by Attached Chains at the Fiber-Matrix Interface, J. Adhesion36, 125-137 (1991).
5.
Clark, D.T., Cromarty, B.J., and Dilks, A., A Theoretical Investigation of Molecular Core Binding and Relaxation Energies in a Series of Oxygen-Containing Organic Molecules of Interest in the Study of Surface Oxidation of Polymers, J. Polym. Sci. Polym. Chem. Ed.16, 3173-3184 (1978).
Filbey, J.A., and Wightman, J.P., Surface Characterization in Polymer/ Metal Adhesion, "Adhesive Bonding," L.-H. Lee, Ed., Plenum Publishing Corporation, NY, 1991, p. 196.
8.
Frommer, J.E., and Chance, R.R., Electrically Conductive Polymers, "High Performance Polymers and Composites ," J. I. Kroschwitz, Ed., John Wiley & Sons, NY, 1991, pp. 174-219.
9.
Gaur, U., and Miller, B., Microbond Method for Determination of the Shear Strength of a Fiber/ Resin Interface: Evaluation of Experimental Parameters, Comp. Sci. Tech.34, 35-51 ( 1989).
10.
Gregory, R.V., Kimbrell, W.C., and Kuhn, H.H., Conductive Textile Composites, in "Proc. 3rd Int. SAMPE Electronics Conf," vol. 3, 1989, pp. 570-577.
Gregory, R.V. , Kimbrell, W.C., and Kuhn, H.H., Electrically Conductive Non-Metallic Textile Coatings, J. Coated Fabrics20, 167-175 (1991).
13.
Kuhn, H.H., Kimbrell, W.C., Worrell, G., and Chen, C.S., Properties of Polypyrrole Treated Textiles for Advanced Applications, in "Proc. ANTEC '91," 1991, pp. 760-764.
14.
Penn, L.S., and Jutis, B., The Effect of Pendent Groups at the Fiber Surface on Interfacial Adhesion , J. Adhesion30, 67-81 (1989).
15.
Penn, L.S., and Lee, S.M., Interpretation of Experimental Results in the Single Pull-out Filament Test , J. Comp. Technol. Res.11, 23-30 (1989).
16.
Herrera-Franco, P.J., and Drzal, L.T., Comparison of Methods for the Measurement of Fibre/Matrix Adhesion in Composites, Composites23(1), 2-27 (1992).
17.
Pfluger, P. , and Street, G.B., Chemical, Electronic, and Structural Properties of Conducting Heterocyclic Polymers: A View by XPS, J. Chem. Phys.80(1), 544-553 (1984).
18.
Riggs, W.M., and Parker, M.J., Surface Analysis by X-ray Photoelectron Spectroscopy, "Methods of Surface Analysis," A. W. Czandema, Ed., Elsevier Scientific Publishing Company, NY, 1975, pp. 140-141.
19.
Waghom, C.D., "The Handbook of Photoelectron Spectroscopy," Perkin Elmer Corp., 1979.
20.
Yekta-Fard, M., and Ponter, A.B., Factors Affecting the Wettability of Polymer Surfaces, J. Adhesion Sci. Technol.6(2), 253-277 (1992).
