Evolution of Structure and Properties in a Spunbonding Process

Abstract

The inherent properties of filaments are of utmost importance in spunbonded webs. A good understanding of structure and property development in individual filaments is helpful in better comprehending the whole process. A polypropylene homopolymer and a copolymer (PP/PE) are processed on the Reicofil® spunbonding line at the Textiles and Nonwovens Development Center of the University of Tennessee. The properties of the filament samples taken before thermal bonding are determined through a variety of experimental techniques, such as differential scanning calorimetry. thermomechan ical analysis, scanning electron microscopy, density, x-ray diffraction, and mechanical properties. The performance properties of the bonded nonwoven fabrics from the same set of filaments are evaluated and the structure and properties of the fibers are compared with those of the bonded fabrics. Primary air temperature and throughput have a strong influence on the structure and properties of both filaments (before bonding) and non wovens (after bonding). As primary air temperature and throughput decrease, filament diameter tends to decrease, accompanied by a simultaneous increase in crystallinity. birefringence, tensile strength, initial modulus, thermal stability. and density.

Get full access to this article

View all access options for this article.

References

Damodara, S. , Bhat, G. , et al., Melt Spinning of Polyesters in A Spunbonding Process, paper presented to AICHE 2nd Topical Conference on Emerging Technologies in Materials, San Francisco, CA, Nov. 6-8, 1989.

INDA Standard Test 1980.

Lukach, C.A. , and Spurlin. H.M. , Cupulymer of a-olenfins, in "Copolymerization," ch. IV A. G. E. Ham. Ed.. Interscience, NY, 1964.

Malkan, S. , and Wadsworth. L. , A Review on Spunbond Technology, Int. Nonwovens Bull. 3, 24-33 (1992).

Malkan, S.R. Wadsworth, L.C. , and Davey, C. , A Review on Nonwovens Terhnology, Int. Nonwovens J. 6 (2), 42-70 (1992).

Malkan, S. , Wadsworth, L. , and Davey, C. , Parameter Studies of the Reicofil Spunbonding Process, in "Proc. Third Annual TANDEC Conference." Knoxville. Tennessee. Nov. 1993.

Misra, S. Spruiell, J.E. and Richeson, G.C. , Investigation of The Spunbonding Process Via Mathematical Modeling , INDA J. Nonwovens Res. 5 (2). 13-19 (1993).

Spruiell. J.E. , and White, J.L. , Influence of Molecular Weight Distribution on the Structure and Properties of Melt Spun Polypropylene Filaments , in "Fiber and Yam Processing," J. L. White. Ed., Applied Polymer Symposia, vol. 27, 1975. pp. 121-157.

Storer, Roberta A., ASTM. Easton, MD, 1986.

10.

Taylor, W.N. , Jr. , and Clark . E.S. , X-ray Spectra of Polypropylene , Polym. Eng. Sci. 18, 518 (1978).

11.

Turner-Jones, A. , et al., Polypropylene, Markromol. Chem. 75, 134 ( 1964).

12.

Zhang, D. , Bhat. G. , Malkan. S. , and Wadsworth. L. , Structure and Properties Development of Polypropylene in a Spunbonding Process . in "Proc. Forth Annual TANDEC Conference on Nonwovens , Nov, 1994.