Rheology,Morphology,and Mechanical and Thermal Properties of Blends of Propylene Based Plastomer and Ethylene/1-Octene Copolymer

Abstract

Blends of propylene based plastomer (DP) and ethylene/1-octene copolymer (EOC) of various concentrations are prepared by a melt-blending process at 160°C, using a corotating twin-screw extruder. The rheology, phase morphology, and mechanical and thermal properties of DP/EOC blends are investigated. The results show that addition of DP in EOC can lead to significant improvement of mechanical properties, including yield strength, strength at break, and Young's modulus, concomitant with the reduction of melt viscosity. The experimental data for melt viscosity and elongation at break respectively display a positive deviation from additivity, indicating the enhancement of the component interaction and superior interface properties between DP and EOC phases. The transition from plastic to elastomeric properties coincides with phase inversion. At this 85/15 DP/EOC composition, the decrease in the viscosity of DP matrix enhances EOC dispersed phase size, due to the increase in their viscosity mismatch. DSC analysis shows that the melting temperature of DP and EOC phases in blends remains constant irrespective of the composition, respectively. The nucleation effect of EOC on DP tends to increase the crystallization temperature of DP phase. It is also verified that the EOC phase can be prevented from crystallizing with increasing DP content in the blends.

Keywords

propylene based plastomer ethylene—octene copolymer blends property.

Get full access to this article

View all access options for this article.

References

Kim, Y. , Han, Y. and Lee, M.H. (2001). New Half-Metallocene Catalysts Generating Polyethylene with Bimodal Molecular Weight Distribution and Syndiotactic Polystyrene, Macromol. Rapid. Comm., 22(8): 573—578.

Kim, D.W. and Kim, K.S. (2001). Investigation of Radiation Crosslinked Foams Produced from Metallocene Polyolefin Elastomers/Polyethylene Blend, J. Cell. Plast., 37(4): 333—352.

Da Silva, A.L.N. , Tavares, M.I.B. , Politano, D.P. , Coutinho, F.M.B. and Rocha, M.C.G. (1997). Polymer Blends based on Polyolefin Elastomer and Polypropylene, J. Appl. Polym. Sci., 66(10): 2005—2014.

Da Silva, A.L.N. , Rocha, M.C.G. , Coutinho, F.M.B. , Bretas, R. and Scuraccio, C. (2000). Rheological and Morphological Properties of Blends based on Ethylene-octene Copolymer and Polypropylene , Polym. Test., 19(4): 363—371.

Paul, S. and Kale, D.D. (2000). Impact Modification of Polypropylene Copolymer with a Polyolefinic Elastomer, J. Appl. Polym. Sci., 76(9): 1480— 1484.

Da Silva, A.L.N. , Rocha, M.C.G. , Coutinho, F.M.B. , Bretas, R.E.S. and Scuracchio , C. (2001). Rheological and Thermal Properties of Binary Blends of Polypropylene and Poly(ethylene-CO-1-octene) , J. Appl. Polym. Sci., 79(9): 1634—1639.

Prieto, O. , Perena, J.M. , Benavente, R. , Cerrada, M.L. and Perez, E. (2002). Effect of Composition and Molecular Weight on the Crystallization Behavior of Blends of iPP and a Metallocenic Ethylene/1-octene Copolymer, Macromol. Chem. Phys., 203(12): 1844—1851.

Kontopoulou, M. , Wang, W. , Gopakumar , T.G. and Cheung, C. (2003). Effect of Composition and Comonomer Type on the Rheology, Morphology and Properties of Ethylene-α-olefin Copolymer/Polypropylene Blends, Polymer, 44(24): 7495—7504.

Yang, J.H. , Zhang, Y. and Zhang, Y.X. (2003). Brittle-ductile Transition of PP/POE Blends in Both Impact and High Speed Tensile Tests, Polymer, 44(17): 5047—5052.

10.

Anon. (2004). Dow Opens First Commercial Plant to Produce Versify Polymers, Chem. Eng. Prog., 100(11): 14.

11.

Anon. (2004). Olefinic Versatility, Plast. Eng., 60(5): 7.

12.

Premphet, K. and Paecharoenchai , W. (2001). Quantitative Characterization of Dispersed Particle Size, Size Distribution, and Matrix Ligament Thickness in Polypropylene Blended with Metallocene Ethylene-octene Copolymers, J. Appl. Polym. Sci., 82(9): 2140—2149.

13.

Da Silva, A.L.N. , Rocha, M.C.G. , Coutinho, F.M.B. , Bretas, R. and Scuracchio, C. (2000). Rheological, Mechanical, Thermal, and Morphological Properties of Polypropylene/ethylene-octene Copolymer Blends, J. Appl. Polym. Sci., 75(5): 692—702.

14.

Wu, S. (1987). Formation of Dispersed Phase in Incompatible Polymer Blends: Interfacial and Rheological Effects, Polym. Eng. Sci. , 27(5): 335—343.

15.

Da Silva, A.L.N. , Rocha, M.C.G. , Lopes, L. , Chagas, B.S. and Coutinho, F.M.B. (2001). The Effect of Addition of Different Elastomers upon the Crystalline Nature of PP, J. Appl. Polym. Sci., 81(14): 3530—3537.