Three-dimensional Finite Element Modeling of Rubber Curing Process

Abstract

This paper describes the development of a finite element model for the simulation of the rubber curing process in a mold. Thermal conductivity and heat capacity of the rubber are assumed to be dependent on temperature. The cure kinetic behavior of the rubber is also assumed to be described by an empirical model proposed by Kamal and Sourour. The governing equation is solved using the finite element method in a three-dimensional Cartesian coordinate system. The applicability of the model is verified by a comparison between the results of the simulation of the vulcanization of a rubber part in the mold with experimentally measured temperature profile. It has been shown that there is very good agreement between the model predictions and the actual data.

Keywords

rubber finite element simulation cure kinetics mathematical model

Get full access to this article

View all access options for this article.

References

Prentice, G.A. and Williams, M.C. (1980). Numerical Evaluation of the State of Cure in a Vulcanizing Rubber Article , Rubber Chem. Technol., 53: 1023–1031 .

Toth, W.J. , Chang, J.P. and Zanichelli, C. (1991). Finite Element Evaluation of the State of Cure in a Tire , Tire Sci. Technol., 19: 178–212 .

Ghoreishy, M.H.R. (2001). FEA in the Mold, Tire Technology International, Annual Review, 74–77.

Isayev, A.I. and Deng, J.S. (1988). Nonisothermal Vulcanization of Rubber Compounds , Rubber. Chem. Technol., 61: 340–361 .

Ding, R. and Leonov, A.I. (1996). A Kinetic Model for Sulfur Accelerated Vulcanization of a Natural Rubber Compound , J. Appl. Polym. Sci., 6: 455–463 .

Chan, T.W. , Shyu, G.D. and Isayev, A.I. (1993). Reduced Time Approach to Curing Kinetics, Part I: Dynamic Rate and Master Curve from Isothermal Data , Rubber Chem. Technol., 66: 849–864 .

Chan, T.W. , Shyu, G.D. and Isayev, A.I. (1994). Reduced Time Approach to Curing Kinetics, Part II: Master Curve from Nonisothermal Data , Rubber Chem. Technol., 67: 314–328 .

Reddy, J.N. and Gartling, D.K. (2001). The Finite Element Method in Heat Transfer and Fluid Mechanics, 2nd edn, CRC Press, New York .

Perry, R.H. , and Green, D.W. (1984). Perry’s Chemical Engineer’s Handbook, 6th edn, McGraw-Hill, New York .

10.

Hood, P. (1976). Frontal Solution Program for Unsymmetric Matrices , Int.J. Num. Meth. Eng., 10: 379–399 .