Development of Rubber Pressure Molding Technique using Silicone Rubber to Fabricate Fiber-reinforced Plastic Components Based on Glass Fiber and Epoxy Resin

Abstract

In this study, a rubber pressure molding (RPM) technique is developed to prepare fiber-reinforced plastic components (FRP) using glass fiber and epoxy resin. The technique is based on the matching die set, where the die is made of hard metal-like steel and the punch from flexible rubber-like materials. The use of a flexible rubber punch helps to intensify and uniformly redistribute pressure (both the operating pressure and developed hydrostatic pressure due to the flexible rubber punch) on the surface of the product. A split steel die and rubber punch are designed and fabricated to prepare the FRP components. The same split die is also used to cast the rubber punch. Silicone rubber is used to prepare the rubber punch in this investigation. Burn test, coin test, scanning electron microscopy, and mechanical tests like interlaminar fracture toughness, interlaminar shear test (ILST), tension test, etc. are carried out to know the fiber content, void content, presence of delamination, bonding between fiber and resin, microstructure, and mechanical properties of the composite materials. These properties are also compared with the FRP components made by the conventional technique to evaluate its performances in structural applications.

Keywords

fiber-reinforced plastic rubber pressure molding epoxy resin glass fiber silicone rubber mechanical properties.

Get full access to this article

View all access options for this article.

References

Agrawal, B.D. and Broutman, L.J. (1990). Analysis and Performance of Fiber Composite, John Wiley & Sons, Inc., New York .

Behera, S.K. (2003). FRP Products using Rubber Moulding Technique, MTech. Thesis, Department of Mechanical Engineering, Indian Institute of Technology Kanpur , India.

Dornier Standard : Preimpregnated Glass Fabric with Epoxy Resin Compounds, Dornier Standard DOL 65, Part 4, February 1984; GFRPfabric Prepreg with EP-resin 125°C - System, General Requirements, Dornier Standard DOL 63, Part 1, May 1990; Preimpregnated Fabric Fibre Lay Ups with EP-resin Matrix, Technical Specifications, Dornier Standard DON 128, Part 1, February 1990.

Edwards, K.L. (1998). An Overview of the Technology of Fiber-reinforced Plastics for Design Purposes , Materials & Design, 19: 1—10 .

Gutowski, T.G. (ed.). (1997). Advanced Composites Manufacturing, John Wiley & Sons, Inc, New Delhi , India.

Hollaway, L. (1994). Handbook of Polymer Composites for Engineering , Woodhead Publishing Ltd., Cambridge , England.

Kumar, P. (1999). Elements of Fracture Mechanics, Wheeler publishing , India.

Kelly, A. and Zweben, C. (eds), (2000). Comprehensive Composite Materials , Elsevier Science Ltd, New York .

Kumar, P. , Goel, B. and Bandhopadhyay, J. (1995). Unidirectional Prepreg Machine — An Indigenous Development , Journal of Institution of Engineers, 75: 6—10 .

10.

Mangalgiri, P.D. (1999). Composite Materials for Aerospace Application, Bull. Material Science , Indian Academy of Sciences, 22: 657—664 .

11.

Parkyn, B. (ed.), (1970). Glass Reinforced Plastics, Chem. Rubber Co., Cleveland, Ohio .

12.

Saha, T.K. (2002). Development of Rubber Pressure Molding to Fabricate FRP Components, MTech Thesis, Department of Mechanical Engineering, Indian Institute of Technology, Kanpur , India.