Thermal Decomposition Behavior of In Situ Reinforcing Elastomer Composite Based on Thermoplastic Elastomer and Thermotropic Liquid Crystalline Polymer

Abstract

A thermotropic liquid crystalline polymer (TLCP), a copolyester with a 60/40 molar ratio of p-hydroxy benzoic acid (HBA) and poly(ethylene terephthalate) (PET), known as Rodrun LC3000, is melt blended with styrene— (ethylene—butylene)—styrene (SEBS) thermoplastic elastomer using a twin-screw extruder. The nonisothermal and isothermal thermogravimetry (TG) in nitrogen and in air of the neat SEBS and a blend containing 30 wt% Rodrun LC3000 (SEBS-30) are performed. The isoconversional method is employed to study the kinetics of thermal and thermo-oxidative degradation of the neat polymers and its blend. The nonisothermal TG profiles of SEBS and SEBS-30 reveal a single weight loss step in nitrogen and two stages of weight loss in air. For nonisothermal heating, a very small amount of char residues of SEBS are left, whereas the residues of SEBS-30 are left as high as 10 wt% after degradation in nitrogen. The isothermal degradation of SEBS and SEBS-30 in nitrogen becomes relatively more rapid with increasing temperature. A remarkable increase in weight loss rate is observed under isothermal heating in nitrogen above 350^°C. By heating isothermally in air, SEBS shows a single weight loss stage and rapid decomposition whereas SEBS-30 exhibits minor and major weight losses in the first step and the second step, respectively. The apparent activation energy (E), ln(frequency factor) (lnA), and decomposition order (n) from nonisothermal and isothermal degradation of SEBS-30 are mostly higher than that of SEBS. The obtained kinetic parameters indicate that the thermal stability in nitrogen is higher than that in air. The estimated lifetimes at different temperatures suggest an enhancement of thermal resistance of SEBS with in situ reinforcing by Rodrun LC3000.

Keywords

polymer in situ composite liquid crystalline polymer thermal degradation thermal stability thermoplastic elastomer.

Get full access to this article

View all access options for this article.

References

Legg, N.R. , Holden, D. and Schroeder, H.E. (eds) (1987). Thermoplastic Elastomers, Hanser, Munich .

Amornsakchai, T. , Sinpatanapan, B. , Bualek-Limcharoen , S. and Meesiri, W. (1999). Composite of Aramid Fibre (Poly-m-phenylene Isophthalamide)— Thermoplastic Elastomers (SEBS): Enhancement of Tensile Properties by Maleated-SEBS Compatibiliser , Polymer, 40(11): 2993 .

Chantaratcharoen, A. , Sirisinha, C. , Amornsakchai, T. , Bualek-Limcharoen , S. and Meesiri, W. (1999). Improvement of Interfacial Adhesion of Poly(m-phenylene Isophthalamide) Short Fiber— Thermoplastic Elastomer (SEBS) Composites by N-alkylation on Fiber Surface , J. Appl. Polym. Sci., 74(10): 2414 .

Chang, Y.-W. , Shin, J.-Y. and Ryu, S.H. (2004). Preparation and Properties of Styrene-Ethylene/Butylene-Styrene (SEBS)—Clay Hybrids , Polym. Int., 53(8): 1047 .

Lorenzo, L. , Ahuja, S.K. and Chang, H. (1988). Viscoelasticity of Polystyrene Liquid Crystal Copolyester Extrusion Blends , Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.), 29(1): 488 .

Verhoogt, H. , Langelaan, H.C. , Van Dam, J. and De Boer, A.P. (1993). Blends of a Thermotropic Liquid Crystalline Polymer and a Thermoplastic Elastomer. I: Mechanical Properties and Morphology , Polym. Eng. Sci., 33(12): 754 .

Verhoogt, H. , Willems, C.R.J. , Van Dam, J. and De Boer, A.P. (1994). Blends of a Thermotropic LCP and a Thermoplastic Elastomer. II: Formation and Stability of LCP Fibers , Polym. Eng. Sci. 34(5): 453 .

Machiels, A.G.C. , Denys, K.F.J. , Van Dam, J. and De Boer, A.P. (1996). Formation, Stability, and Properties of In-situ Composites based on Blends of a Thermotropic Liquid Crystalline Polymer and a Thermoplastic Elastomer , Polym. Eng. Sci., 36(19): 2451 .

Saikrasun, S. , Bualek-Limcharoen , S. , Kohjiya, S. and Urayama, K. (2003). Thermotropic Liquid-crystalline Copolyester/Thermoplastic Elastomer In Situ Composites. I. Rheology, Morphology, and Mechanical Properties of Extruded Strands , J. Appl. Polym. Sci., 89(10): 2676 .

10.

Saikrasun, S. , Bualek-Limcharoen , S. , Kohjiya, S. and Urayama, K. (2003). Thermotropic Liquid-crystalline Copolyester (RodrunLC3000)/ Thermoplastic Elastomer (SEBS) In Situ Composites: II . Mechanical Properties and Morphology of Monofilaments in Comparison with Extruded Strands , J. Appl. Polym. Sci., 90(2): 518 .

11.

Saikrasun, S. , Bualek-Limcharoen , S. , Kohjiya, S. and Urayama, K. (2005). Anisotropic Mechanical Properties of Thermoplastic Elastomers In Situ Reinforced with Thermotropic Liquid-crystalline Polymer Fibers Revealed by Biaxial Deformations , J. Polym. Sci. Part B Polym. Phys., 43(2): 135 .

12.

Kiss, G. (1987). In Situ Composites: Blends of Isotropic Polymers and Thermotropic Liquid Crystalline Polymers , Polym. Eng. Sci., 27(6): 410 .

13.

Mandal, P.K. , Bandyopadhyay, D. and Chakrabarty , D. (2003). Studies on Morphology, Mechanical, Thermal, and Rheological Behavior of Extrusion-blended Polypropylene and Thermotropic Liquid Crystalline Polym , J. Appl. Polym. Sci., 88(3): 767 .

14.

Lee, S. , Hong, S.M. , Seo, Y. , Park, T.S. , Hwang, S.S. and Kim, K.U. (1994). Characterization and Processing of Blends of Poly(ether imide) with Thermotropic Liquid Crystalline Polymer , Polymer , 35(3): 519 .

15.

Sahoo, N.G. , Das, C.K. , Pandey, K.N. and Mathur, G.N. (2002). Structural Characterization of PBT-LCP Blends , Mater. Lett., 56(3): 194 .

16.

Meng, Y.Z. , Tjong, S.C. and Hay, A.S. (1998). Morphology, Rheological and Thermal Properties of the Melt Blends of Poly(phthalazinone ether ketone sulfone) with Liquid Crystalline Copolyester , Polymer, 39(10): 1845 .

17.

Naffakh, M. , Ellis, G. , Gomez, M.A. and Macro, C. (1999). Thermal Decomposition of Technological Polymer Blends 1. Poly(aryl ether ether ketone) with a Thermotropic Liquid Crystalline Polymer , Polym. Degrad. Stab., 66(3): 405 .

18.

Chakraborty, S. , Sahoo, N.G. , Jana, G.K. and Das, C.K. (2004). Self-reinforcing Elastomer Composites based on Ethylene-propylene-diene Monomer Rubber and Liquid-crystalline Polymer , J. Appl. Polym. Sci., 93(2): 711 .

19.

Isayev, A.I. and Subramanian, P.R. (1992). Blends of a Liquid Crystalline Polymer with Polyether Ether Ketone , Polym. Eng. Sci., 32(2): 85 .

20.

Mehta, A. and Isayev, A.I. (1991). The Dynamic Properties, Temperature Transitions, and Thermal Stability of Poly (etherether ketone)-thermotropic Liquid Crystalline Polymer Blends , Polym. Eng. Sci., 31(13): 963 .

21.

Subramanian, P.R. and Isayev, A.I. (1991). Blends of a Thermotropic Liquid-crystal Polyester with Poly(phenylene sulphide) , Polymer , 32(11): 1961 .

22.

Seo, Y. (1998). TLCP Ternary Blends for In Situ Composites: In Situ Compatibilizer , J. Appl. Polym. Sci., 70(8): 1589 .

23.

Saikrasun, S. and Wongkalasin, O. (2005). Thermal Decomposition Kinetics of Thermotropic Liquid Crystalline p-hydroxy Benzoic Acid/Poly(ethylene terephthalate) Copolyester , Polym. Degrad. Stab., 88(2): 300 .

24.

Radhakrisman, J. , Ito, H. , Kikutani, T. and Okui, N. (1999). Enhancement of Fiber Structure Formation of a Liquid Crystalline Copolyester via Ultrahigh Speed Bicomponent Spinning with Poly(ethylene terephthalate) , Polym. Eng. Sci., 39(1): 89 .

25.

Fairclough, J.P.A. , Salou, C.L.O. , Ryan, A.I. , Hamley, I.W. , Daniel, C. , Helsby, W.I. , Hall, C. , Lewis, R.A. , Gleeson, A.J. , Diakun, G.P. and Mant, G.R. (2000). Correlation of Lattice Deformation with Macroscopic Strain for the Hexagonal-packed Cylinder Phase of a Triblock Copolymer , Polymer, 41(7): 2577 .

26.

Ozawa, T. (1965). A New Method of Analyzing Thermogravimetric Data , Bull. Chem. Soc. Jpn., 38(11): 1881 .

27.

Flynn, J.H. and Wall, L.A. (1966). General Treatment of the Thermogravimetry of Polymers , J. Res. Natl. Bur. Stand. , 70A(6): 487 .

28.

Kissinger, H.E. (1957). Reaction Kinetics in Differential Thermal Analysis , Anal. Chem., 29(1): 1702 .

29.

Vyazovkin, S. (2000). Computational Aspects of Kinetic Analysis.: Part C. The ICTAC Kinetics Project — The Light at the End of The Tunnel? , Thermochim. Acta, 355(1—2): 155 .

30.

Abate, L. , Calana, S. , Policino, A. and Recca, A. (1996). Thermal Stability of a Novel Poly(ether ether Ketone Ketone) (PK99) , Polym. Eng. Sci., 36(13): 1782 .

31.

Zucolotto, V. , Avlyanov, J. and Mattoso, L.H.C. (2004). Elastomeric Conductive Composites based on Conducting Polymer-modified Carbon Black , Polym. Compos., 25(6): 617 .

32.

Li, X.-G. , Huang, M.R. , Guan, G.-H. and Sun, T. (1998). Kinetics of Thermal Degradation of Thermotropic Poly(p-oxybenzoate-coethylene terephthalate) by Single Heating Rate Methods , Polym. Int., 46(4): 289 .

33.

Allen, N.S. , Edge, M. , Wilkinson, A. , Liauw, C.M. , Mourelatou, D. , Barrio, J. and Martinez-Zaporta , M.A. (2001). Degradation and Stabilisation of Styrene—Ethylene—Butadiene—Styrene (SEBS) Block Copolymer , Polym. Degrad. Stab., 71(1): 113 .

34.

Hatakeyama, T. and Quinn, F.X. (1999). Thermal Analysis: Fundamentals and Applications to Polymer Science, Chapter 4, 2nd edn, John Wiley Sons, Chichester .

35.

Peterson, J.D. , Vyazovkin, S. and Wight, C.A. (2001). Kinetics of the Thermal and Thermo-oxidative Degradation of Polystyrene, Polyethylene and Poly(propylene) , Macromol. Chem. Phys., 202(6): 775 .

36.

Billingham, N.C. (1993). In Atmospheric Oxidation and Antioxidants, Chapter 4, Vol II, 2nd edn, Elsevier Science, New York .

37.

Chen, K.S. , Yeh, R.Z. and Chang, Y.R. (1997). Kinetics of Thermal Decomposition of Styrene-butadiene Rubber at Low Heating Rates in Nitrogen and Oxygen , Combust. Flam., 108(4): 408 .