Natural Weathering of Poly (Lactic Acid): Effects of Rice Starch and Epoxidized Natural Rubber

Abstract

Poly(lactic acid) (PLA) composites consisting of PLA, rice starch (RS), and epoxidized natural rubber (ENR50) are compounded using a twinscrew extruder followed by compression molding. Two types of thermoplastic starch are prepared by mixing RS with glycerol and water. Natural weathering tests are performed on the PLA/RS composites in Penang, Malaysia for 2 months. The average mean temperature and mean relative humidity are 29°C and 70%, respectively. Tensile tests are performed to characterize the mechanical properties of the weathered PLA/RS composites. Morphological studies are performed by using scanning electron microscopy (SEM). The tensile properties of weathered PLA/RS composites decreased slightly, on the other hand, the tensile properties of weathered PLA/SG and PLA/SGW composites decreased drastically. The retention-ability of the PLA composites are relatively low, which may be attributed to the photo-degradation of PLA, chain scission of PLA, oxidation degradation on ENR, moisture absorption of RS, and leaching of RS particles. In addition, discoloration, surface roughness, surface cracking, and embrittlement are observed for all PLA/RS composites. The extent of degradation is increased by the addition of ENR, owing to the fact that ENR is susceptible to oxygen attack, and consequently facilitates degradation. The morphological properties of the weathered PLA/RS composites are transformed to a more brittle behavior, indicating that severe degradation has occurred on the PLA/RS composites.

Keywords

polylactic acid (PLA)rice starch epoxidized natural rubber (ENR)natural weathering composites.

Get full access to this article

View all access options for this article.

References

Jacques, L.F.E. (2000). Accelerated and Outdoor/Natural Exposure Testing of Coatings, Prog. Polym. Sci., 25: 1337-1362.

Nicholson, J.W. (1991). The Chemistry of Polymers. UK, The Royal Society of Chemistry.

Breslin, V.T. and Li, B. (1993). Weathering of Starch-polyethylene Composite Films in the Marine Environment, J. Appl. Polym. Sci., 48: 2063-2079.

Danjaji, I.D. , Nawang, R. , Ishiaku , U.S. , Ismail, H. and Mohd Ishak, Z.A. (2002). Degradation Studies and Moisture Uptake of Sago-starch Filled Linear Low-density Polyethylene Composites, Polym. Test., 21: 75-81.

Garlotta, D. , Doane, W. , Shogren , R. , Lawton, J. and Willett, J.L. (2003). Mechanical and Thermal Properties of Starch-filled Poly(D,L-lactic Acid)/ Poly(hydroxy Ester Ether) Biodegradable Blends, J. Appl. Polym. Sci., 88: 1775-1786.

Ishiaku, U.S. and Mohd Ishak, Z.A. (1999). Developments in Poly(vinyl Chloride)/Epoxidized Natural Rubber Blends, In: Shonaike, G.O. and Simon, G.P. (eds), Polymer Blends and Alloys, pp. 663-718, New York, Marcel Dekker.

Yew, G.H. , Mohd Yusof, A.M. , Mohd Ishak, Z.A. and Ishiaku, U.S. (2005). Water Absorption and Enzymatic Degradation of Polylactic Acid/Rice Starch Composites, Polym. Deg. Stab., 90: 488-500.

Scheirs, J. (2000). Compositional and Failure Analysis of Polymers: A Practical Approach, New York, John Wiley & Sons.

Copinet, A. , Bertrand, C. , Govindin, S. , Coma, V. and Couturier, Y. (2004). Effects of Ultraviolet Light (315 nm), Temperature and Relative Humidity on the Degradation of Polylactic Acid Plastic Film, Chemosphere, 55: 763-773.

10.

Spychaj, T. (2002). Chemical Recycling of PET: Methods and Products , In: Fakirov, S. (ed.), Handbook of Thermoplastic Polyesters, pp. 1251-1290, Wiley-VCH , Weinheim.

11.

Kockott, D. (1999). Weathering, In: Brown, R. (ed.), Handbook of Polymer Testing, Physical Methods , pp. 697-734, New York, Marcel Dekker.

12.

Preechawong, D. , Peesan, M. , Supophol , P. and Rujiravanit , R. (2005). Preparation and Characterization of Starch/Poly(L-lactic Acid) Hybrid Foams , Carbohydrate Polym., 59: 329-337.

13.

Choi, N.S. and Takahashi, K. (2002). Fracture Behavior of Discontinuous Fiber-reinforced Injection Molded Polyester Composites, In: Fakirov, S. (ed.), Handbook of Thermoplastic Polyesters , pp. 1173-1217, Weinheim, Wiley-VCH .

14.

Sharma, N. , Chang, L.P. , Chu, Y.L. , Ismail, H. , Ishiaku, U.S. and Mohd Ishak, Z.A. (2001). A Study on the Effect of Pro-oxidant on the Thermo-oxidative Degradation Behaviour of Sago Starch Filled Polyethylene, Polym. Deg. Stab., 71: 381-393.

15.

Poh, B.T. and Lee, K.S. (1993). FTIR Study of Thermal Oxidation of ENR, Eur. Polym. J., 30: 17-23.

16.

Baum, B. , Parker, C.H. and Deanin, R.D. (1982). Environmental Resistance, In: Baijal, M.D. (ed.), Plastics Polymer Science and Technology, pp. 883-937, New York, John Wiley & Sons.