Epoxidized natural rubber (ENR)-based adhesive was prepared using gum rosin and toluene as the tackifier and solvent, respectively. Peel strength of adhesive was determined using a Llyod adhesion tester operating at different rates of testing. Result shows that peel strength increases up to an optimum molecular weight of 6.5 × 104 of ENR 25. This observation is attributed to the combined effects of wettability and mechanical strength of rubber. Differential scanning calorimetry measurement confirms the miscibility of tackifier and ENR 25. Statistical analysis was used to further investigate the effect of molecular weight and testing rate on the peel adhesion of the adhesive.
PaivaAShellerNFosterMD. Study of the surface adhesion of pressure sensitive adhesives by atomic force microscopy and spherical indenter tests. Macromolecules2000; 33: 1878–1881.
2.
WetzelFH. Rosin and rosin derivatives in pressure-sensitive adhesives. Rubber Age1957; 82: 291–295.
3.
SherriffMKnibbsRWLangleyPG. Mechanism for the action of tackifying resins in pressure-sensitive adhesives. J Appl Polym Sci1973; 17: 3423–3438.
4.
AubreyDW. Nature and action of tackifier resins. Rubber Chem Technol1988; 61: 448–469.
5.
SasakiMFujitaKAdachiMFujiiSNakamuraYUrahamaY. The effect of tackifier on phase structure and peel adhesion of a triblock copolymer pressure-sensitive adhesive. Int J Adhes Adhes2008; 28: 372–381.
6.
TakemotoMKajiyamaMMizumachiHTakemuraAOnoH.Miscibility and adhesive properties of ethylene vinyl acetate copolymer (EVA)-based hotmelt adhesives. I. Adhesive tensile strength. J Appl Polym Sci2002; 83: 719–725.
7.
HayashiSKimHJKajiyamaMOnoHMizumachiHZufuZ. Miscibility and pressure-sensitive adhesive performances of acrylic copolymer and hydrogenated rosin systems. J Appl Polym Sci1999; 71: 651–663.
8.
NairRKSawantMR. Effect of the coating of the polymer blend (Polyacrylamide/PEG 6000) on the efficiency of rice husk as a pesticide carrier. J Disp Sci Technol2006; 27: 1021–1025.
AubreyDWSherriffM. Peel adhesion and viscoelasticity of rubber–resin blends. J Polym Sci Polym Chem1980; 18: 2597–2608.
11.
HataTTsukataniTMizumachiH. Holding power (tb) and sliding friction coefficient of pressure sensitive adhesives. J Adhes Soc Japan1994; 30: 307–312.
12.
FujitaMKajiyamaMTakemuraAOnoHMizumachiHHayashiS.Miscibility between natural rubber and tackifiers. II. Phase diagrams of the blends of natural rubber and petroleum resins. J Appl Polym Sci1998; 67: 221–229.
13.
LanrockA. Adhesive technology hand book. Park Ridge: Noyes Publishing, 1985.
14.
DahlquistCA. Pressure sensitive adhesive technology. New York, NY: Van Nostrand Reinhold, 1989.
15.
PohBTChowSK. Effect of zinc oxide on the viscosity, tack, and peel strength of ENR 25-based pressure-sensitive adhesives. J Appl Polym Sci2007; 106: 333–337.
KhanIPohBT. Effect of silica on viscosity, tack, and shear strength of epoxidized natural rubber-based pressure-sensitive adhesives in the presence of coumarone-indene resin. J Appl Polym Sci2010; 118: 3439–3444.
18.
KhanIPohBT. The effect of silica on the peel adhesion of epoxidized natural rubber-based adhesive containing coumarone-indene resin. Polym Plast Technol Eng2010; 49: 1356–1360.
19.
PohBTGanCF. Viscosity and peel strength of magnesium oxide-filled adhesive prepared from epoxidized natural rubber (ENR 25). Polym Plast Technol Eng2010; 49: 191–194.
20.
PohBTChewCE. Effect of kaolin on adhesion property of epoxidized natural rubber-based pressure-sensitive adhesive using gum rosin as the tackifier. J Elastom Plast2009; 41: 447–456.
21.
BillmeyerFW. Textbook of polymer science. New York, NY: Wiley, 1984, p.208.
22.
BatemanL. The chemistry and physics of rubber-like substances. London, England: Maclaren Ed, 1963, p.149.
23.
BrandrupJImmergut EdmundHGrulke EricAAkihiroAbeBloch DanielR.Polymer handbook. 4th ed.New York, NY: John Wiley & Sons, 2005.
24.
ASTM D907-03. Terminology of adhesives. Annual book of ASTM standards. Philadelphiavol; American Society for Testing and Materials, 2004.
25.
SatasD. Handbook of pressure sensitive adhesive technology. New York, NY: Van Nostrand Reinhold, 1982, p.54.
26.
LeeLH. Adhesive bonding. New York, NY: Plenum Press, 1991.
27.
SkeistI. Handbook of adhesives. New York, NY: Van Nostrand Reinhold, 1990.
28.
SatasD. Handbook of pressure sensitive adhesive technology. New York, NY: Van Nostrand Reinhold, 1989, p.61.
29.
LiuYLiuPSuZ. Thermal stabilities of attapulgite/polystyrene (ATP/PS) nanocomposites via microwave-assisted bulk polymerization. J Disp Sci Technol2008; 29: 478–481.
30.
BrazierDW. Applications of thermal analytical procedures in the study of elastomers and elastomer systems. Rubber Chem Technol1980; 53: 437–511.
31.
SircarAKGalaskaMLRodriguesSChartoffRP. Glass transition of elastomers using thermal analysis techniques. Rubber Chem Technol1999; 72: 513–552.
32.
SomanathanNSanjayAArumugamV. Compatibility studies on polystyrene and poly-n-butyl methacrylate. J Appl Polym Sci2002; 83: 2322–2330.
33.
KimHJMizumachiH.Miscibility and peel strength of acrylic pressure-sensitive adhesives: Acrylic copolymer–tackifier resin systems. J Appl Polym Sci1995; 56: 201–209.
34.
GordonMTaylorJS. Ideal copolymers and the second-order transitions of synthetic rubbers. i. non-crystalline copolymers. J Appl Chem1952; 2: 493–500.
SongMHammicheAPollockHMHourstonDJReadingM. Modulated differential scanning calorimetry: 1. A study of the glass transition behaviour of blends of poly(methyl methacrylate) and poly(styrene-co-acrylonitrile). Polymer1995; 36: 3313–3316.
37.
FoxTG. Influence of diluent and of copolymer composition on the glass temperature of a polymer system. Bull Am Phys Soc1956; 1: 123.
38.
PohBTGiamYFYeongFPA. Tack and shear strength of adhesives prepared from styrene-butadiene rubber (SBR) using gum rosin and petro resin as tackifiers. J Adhes2010; 86: 846–858.
39.
KhanIPohBT. Effect of molecular weight and testing rate on adhesion property of pressure–sensitive adhesives prepared from epoxidized natural rubber. Mater Design2011; 32: 2513–2519.
40.
KhanIPohBT. Effect of molecular weight and testing rate on peel and shear strength of epoxidized natural rubber (ENR 50)-based adhesives. J Appl Polym Sci2011; 120: 2641–2647.
41.
GardonJL. Peel adhesion. I. Some phenomenological aspects of the test. J Appl Polym Sci1963; 7: 625–641.
