Mechanical,thermal and morphological properties of poly(lactic acid)/epoxidized natural rubber blends

Abstract

In this work, we report a melt blend of poly(lactic acid)(PLA)/epoxidized natural rubber (ENR) with liquid natural rubber (LNR). The LNR was synthesized by a photochemical degradation technique and used as a compatibilizer in the PLA/rubber binary blending systems. The PLA/ENR/LNR blends were melt-blended in a Haake internal mixer at 180°C and mixing speed of 50 r. min⁻¹ for 15 min. It was found that the addition of LNR compatibilizer has improved the tensile strength and elongation at break for the compositions of the 40PLA/55ENR/5LNR blend system when compared with a noncompatibilized system (40PLA/55ENR/5NR). The elongation at break for the blend with 5% LNR compatibilizer showed a twofold increment compared with the blend without LNR. The increase in tensile strength and elongation at break were associated with the ability of LNR to promote the uniform dispersion between the natural rubber (NR) and PLA phases as observed in the scanning electron microscopic analysis. Moreover, the differential scanning calorimetric results indicated that the 40PLA/55ENR/5LNR showed the highest degree of crystallinity and thus contributed to improve their mechanical properties. Thermogravimetric analysis showed that two degradation transitions for both compatibilized and noncompatibilized blend systems due to higher degradation temperatures of ENR50 and NR parts. Fourier transform infrared spectroscopic analysis revealed that the PLA/ENR/NR and PLA/ENR/LNR blends were not miscible.

Keywords

PLA ENR rubber blend biodegradable polymers

Get full access to this article

View all access options for this article.

References

Vink

ETH

Rábago

Glassner

Gruber

. Applications of life cycle assessment to NatureWorks(TM) polylactide (PLA) production. Polym Degrad Stab 2003; 80(3): 403–419.

Lee

Choi

Park

Kim

. Compatibilizing effects for improving mechanical properties of biodegradable poly (lactic acid) and polycarbonate blends. Polym Degrad Stab 2011; 96(4): 553–560.

Balakrishnan

Hassan

Wahit

Yussuf

Razak

SBA

. Novel toughened polylactic acid nanocomposite: mechanical, thermal and morphological properties. Mater Des 2010; 31(7): 3289–3298.

Balakrishnan

Hassan

Wahit

. Mechanical, thermal, and morphological properties of polylactic acid/linear low density polyethylene blends. J Elastomers Plast 2010; 42(3): 223–239.

Signori

Coltelli

M-B

Bronco

. Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing. Polym Degrad Stab 2009; 94(1): 74–82.

Wang

Gross

McCarthy

. Reactive compatibilization of biodegradable blends of poly(lactic acid) and poly(∊-caprolactone). Polym Degrad Stab 1998; 59 (1 –3): 161–168.

Chen

Dong

Cheung

. Preparation and characterization of biodegradable poly(l-lactide)/chitosan blends. Eur Polym J 2005; 41(5): 958–966.

Averous

Boquillon

. Biocomposites based on plasticized starch: thermal and mechanical behaviours. Carbohydr Polym 2004; 56(2): 111–122.

Pospísil

Horák

Krulis

Nespurek

Kuroda

S-i

. Degradation and aging of polymer blends I. Thermomechanical and thermal degradation. Polym Degrad Stab 1999; 65(3): 405–414.

10.

Tanrattanakul

Sungthong

Raksa

. Rubber toughening of nylon 6 with epoxidized natural rubber. Polym Test 2008; 2 7(7): 794–800.

11.

Huang

Keskkula

Paul

. Rubber toughening of an amorphous polyamide by functionalized SEBS copolymers: morphology and Izod impact behavior. Polymer 2004; 45(12): 4203–4215.

12.

Borggreve

RJM

Gaymans

Eichenwald

. Impact behaviour of nylon-rubber blends: 6. Influence of structure on voiding processes; toughening mechanism. Polymer 1989; 30(1): 78–83.

13.

Dompas

Groeninckx

Isogawa

Hasegawa

Kadokura

. Toughening behaviour of rubber-modified thermoplastic polymers involving very small rubber particles: 2. Rubber cavitation behaviour in poly(vinyl chloride)/methyl methacrylate-butadiene-styrene graft copolymer blends. Polymer 1994; 35(22): 4750–4759.

14.

Evans

Ahmad

Gilbert

Beaumont

PWR

. Mechanisms of toughening in rubber toughened polymers. Acta Metall 1986; 34(1): 79–87.

15.

Kim

Keskkula

Paul

. The role of inherent ductility in rubber toughening of brittle polymers. Polymer 1991; 32(13): 2372–2376.

16.

Parker

Sue

Huang

Yee

. Toughening mechanisms in core-shell rubber modified polycarbonate. Polymer 1990; 31(12): 2267–2277.

17.

Ramsteiner

McKee

Heckmann

Oepen

Geprägs

. Rubber toughening of syndiotactic polystyrene and poly/(styrene/diphenylethylene). Polymer 2000; 41(17): 6635–6645.

18.

van Dommelen

JAW

Brekelmans

WAM

Baaijens

FPT

. A numerical investigation of the potential of rubber and mineral particles for toughening of semicrystalline polymers. Comput Mater Sci 2003; 27(4): 480–492.

19.

Wang

X-H

Zhang

H-X

Jiang

Wang

Z-G

Liu

C-H

Liang

H-J

Jiang

B-Z

. Toughening of nylon with epoxidised ethylene propylene diene rubber. Polymer 1998; 39(12): 2697–2699.

20.

Zabaleta

González

Eguiazábal

Nazábal

. Rubber toughening of poly(ether imide) by modification with poly(butylene terephthalate). Eur Polym J 2009; 45(2): 466–473.

21.

Ismail

. Properties of polypropylene (PP)/ethylene-propylene diene terpolymer (EPDM)/natural rubber (NR) vulcanized blends: the effect of N,N-m-phenylenebismaleimide (HVA-2) addition. Polym Plast Technol Eng 2009; 4 8(1): 25–33.

22.

Ismail

Ooi

. The effect of epoxidized natural rubber (ENR-50) as a compatibilizer on properties of high-density polyethylene/soya powder blends. Polym Plast Technol Eng:2010; 49(7): 688–693.

23.

Dahlan

Zaman

MDK

Ibrahim

. Liquid natural rubber (LNR) as a compatibiliser in NR/LLDPE blends—II: the effects of electron-beam (EB) irradiation. Radiat Phys Chem 2002; 64 (5–6): 429–436.

24.

Ibrahim

Dahlan

. Thermoplastic natural rubber blends. Prog Polym Sci 1998; 23: 665–706.

25.

Dahlan

Khairul Zaman

Ibrahim

. The morphology and thermal properties of liquid natural rubber (LNR)-compatibilized 60/40 NR/LLDPE blends. Polym Test 2002; 21(8): 905–911.

26.

Shamsuri

Daik

Ahmad

Jumali

MHH

. Nylon-6/liquid natural rubber blends prepared via emulsion dispersion. J Polym Res 2009; 16(4): 381–387.

27.

Ahmad

Abdullah

Sulaiman

Kohjiya

Yoon

. Natural rubber-HDPE blends with liquid natural rubber as a compatibilizer: I. Thermal and mechanical properties. J Appl Polym Sci 1994; 51(8): 1357–1363.

28.

Ibrahim

Zakaria

. Pendepolimeran fotokimia getah asli. Sains Malaysiana 1989; 18(2): 99–109.

29.

Fischer

Sterzel

Wegner

. Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reaction. Kolloid-Zu Z-Polymer 1973; 251: 980–990.

30.

Huang

Kinloch Anthony

Bertsch

Siebert

. Particle-matrix interfacial bonding. Washington, DC, USA: American Chemical Society, 1993, pp. 189–210.

31.

Abdullah

Ahmad

Sulaiman

. Blending of natural rubber with linear low-density polyethylene. J Appl Polym Sci 1995; 58(7): 1125–1133.

32.

Yokohara

Yamaguchi

. Structure and properties for biomass-based polyester blends of PLA and PBS. Eur Polym J 2008; 44(3): 677–685.

33.

Bitinis

Verdejo

Cassagnau

Lopez-Manchado

. Structure and properties of polylactide/natural rubber blends. Mater Chem Phys 2011; 129(3): 823–831.

34.

Zuideveld

Gottschalk

Kropfinger

Thomann

Rusu

Frey

. Miscibility and properties of linear poly(l-lactide)/branched poly(l-lactide) copolyester blends. Polymer 2006; 47(11): 3740–3746.

35.

Yew

Mohd Yusof

Mohd Ishak

Ishiaku

. Water absorption and enzymatic degradation of poly(lactic acid)/rice starch composites. Polym Degrad Stab 2005; 90(3): 488–500.