A novel adhesion-enhancing polyhydrosiloxane containing acrylate groups (MPMS-PHMS) was prepared via the hydrolysis of 3-methacryloyloxypropylmethyldimethoxysilane and the ring-opening polymerization of octamethylcyclotetrasiloxane and tetramethylcyclotetrasiloxane, and was used as cross-linker for addition-cure silicone encapsulant (ASE) with a large amount of alumina as thermally conductive fillers. The chemical structure of MPMS-PHMS was characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, silicon nuclear magnetic resonance spectroscopy, and gel permeation chromatography. The effect of MPMS-PHMS on the properties of ASE was investigated. The results indicated that when using MPMS-PHMS as cross-linker, the cross-linking density of ASE was much higher than that of ASE using commercial poly(hydromethylsiloxane) cross-linker. It was also found that MPMS-PHMS not only markedly improved the adhesion strength of ASE to aluminum substrate but also significantly enhanced the mechanical properties of ASE. Appropriately increasing cure temperature and prolonging cure time were favorable to improve the adhesion strength of ASE. The optimal content of MPMS-PHMS was 10 phr, and the suitable cure temperature and time were approximately between 130 and 150°C and 2 h, respectively.
Ayanoor-VitikkateVChenKLParkWT. Development of wafer scale encapsulation process for large displacement piezoresistive MEMS devices. Sensor Actuat A Phys2009; 156: 275–283.
2.
ShangCYZhaoXJYangX. Epoxy resin containing trifluoromethyl and pendant polyfluorinated phenyl groups: synthesis and properties. High Perform Polym2012; 24: 683–691.
3.
Yazdan MehrMVan DrielWDJansenKMB. Photodegradation of bisphenol A polycarbonate under blue light radiation and its effect on optical properties. Opt Mater2013; 35: 504–508.
4.
ImHGKaKRKimCK. Characteristics of polyurethane elastomer blends with poly(acrylonitrile-co-butadiene) rubber as an encapsulant for underwater sonar devices. Ind Eng Chem Res2010; 49: 7336–7342.
5.
HsuHYHsiehHHTuanHY. Oxidized low density polyethylene: a potential cost-effective, stable, and recyclable polymeric encapsulant for photovoltaic modules. Sol Energy Mater Sol Cells2010; 94: 955–959.
6.
KimJSYangSCKwakSY. High performance encapsulant for light-emitting diodes (LEDs) by a sol-gel derived hydrogen siloxane hybrid. J Mater Chem2012; 22: 7954–7960.
7.
ShenMXHanYQDuanPP. Effect of crystal silica on thermal conductivity of elastic encapsulant. J Elastom Plast2014; 46(5): 401–412.
8.
LopezLMCosgroveABHernandez-OrtizJP. Modeling the vulcanization reaction of silicone rubber. Polym Eng Sci2007; 47: 675–683.
9.
WangJCPanXCXeY. Studies on the application properties of calcium sulfate whisker in silicone rubber composites. J Elastom Plast2012; 44: 55–66.
10.
DelebecqEHermelineNFlersA. Looking over liquid silicone rubbers: (2) mechanical properties vs network topology. ACS Appl Mater Inter2012; 4: 3353–3363.
11.
SimpsonTREParbhooBKeddieJL. The dependence of the rate of crosslinking in poly(dimethyl siloxane) on the thickness of coatings. Polymer2003; 44: 4829–4838.
12.
PradhanBSrivastavaSKAnanthakrishnanR. Preparation and characterization of exfoliated layered double hydroxide/silicone rubber nanocomposites. J Appl Polym Sci2011; 119: 343–351.
13.
RothJAlbrechtVNitschkeM. Surface Functionalization of silicone rubber for permanent adhesion improvement. Langmuir2008; 24: 12603–12611.
14.
O’NeillLShephardNLeadleySR. Atmospheric pressure plasma polymerised primer to promote adhesion of silicones. J Adhesion2008; 84: 562–577.
15.
NwankireCEDowlingDP. Influence of nm-thick atmospheric plasma deposited coatings on the adhesion of silicone elastomer to stainless steel. J Adhes Sci Technol2010; 24: 1291–1302.
16.
VastLDelhalleJMekhalifZ. 7-Octenyltrimethoxysilane, a model coupling molecule to study the adhesion promotion of a silicone elastomer on an Al 2024 alloy. Int J Adhes Adhes2009; 29: 286–293.
17.
IrifuneSItagakiA. Organohydrogenpolysiloxane, making method, and addition-cure silicone composition. Patent 0,015,365, USA, 2011.
18.
SuzukiTKasuyaA. Adhesion of addition-reaction type silicone elastomers. J Adhes Sci Technol1989; 3: 463–473.
19.
ZhangCShephardNERhodesSM. Headgroup effect on silane structures at buried polymer/silane and polymer/polymer interfaces and their relations to adhesion. Langmuir2012; 28: 6052–6059.
20.
AhnDCShephardNEOlneyPA. Thermal gradient enabled XPS analysis of PDMS elastomer adhesion to polycarbonate. Macromolecules2007; 40: 3904–3906.
21.
KerbouaR. Adhesion between addition-curable silicone elastomer and nylon using diallylbisphenol A as adhesion promoter. J Appl Polym Sci2003; 89: 3496–3499.
22.
HardmanBBDujackGM. Self-bonding silicone rubber compositions. Patent 4,311,739, USA, 1982.
23.
FloryPJRehnerJ. Statistical mechanics of cross-linked polymer networks. I. rubberlike elasticity. J Chem Phys1943; 11: 512–520.
24.
MazanJLeclercBGalandrinN. Diffusion of free polydimethylsiloxane chains in polydimethylsiloxane elastomer networks. Eur Polym J1995; 31: 803–807.
25.
YiSLSuYWanYH. Preparation and characterization of vinyltriethoxysilane (VTES) modified silicalite-1/PDMS hybrid pervaporation membrane and its application in ethanol separation from dilute aqueous solution. J Membrane Sci2010; 360: 341–351.
26.
ZhuMGuALiangG. High-performance transparent solvent-free silicone resins with stable storage and low viscosity based on new hyperbranched polysiloxanes. High Perform Polym2013; 25(5): 594–608.
27.
ChenDZYiSPWuWB. Synthesis and characterization of novel room temperature vulcanized (RTV) silicone rubbers using Vinyl-POSS derivatives as cross linking agents. Polymer2010; 51: 3867–3878.
28.
NyczykAPaluszkiewiczCPydaA. Preceramic polysiloxane networks obtained by hydrosilylation of 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane. Spectrochim Acta A2011; 79: 801–808.
29.
KimJSYangSCBaeBS. Thermal stability of sol-gel derived methacrylate oligosiloxane-based hybrids for LED encapsulants. J Sol-Gel Sci Technol2010; 53: 434–440.
30.
ZhaoFCZengXRLiHQ. Preparation and characterization of nano-SiO2/fluorinated polyacrylate composite latex via nano-SiO2/acrylate dispersion. Colloids and Surfaces A Physicochem Eng Aspects2012; 396: 328–335.
31.
YangXFYaoC. Synthesis and comparative properties of poly(dimethylsiloxane) grafted alkyl acrylate. J Appl Polym Sci2007; 106: 3600–3604.
32.
DengXBLuoRChenHL. Synthesis and surface properties of PDMS–acrylate emulsion with gemini surfactant as co-emulsifier. Colloid Polym Sci2007; 285: 923–930.
33.
HanYMZhangJYYangQY. Novel polymethoxylsiloxane-based crosslinking reagent and its in-situ improvement for thermal and mechanical properties of siloxane elastomer. J Appl Polym Sci2008; 107: 3788–3795.
34.
GaoLJZhouLMFangSM. New copoly(urethane-methacrylate)s obtained by adjusting the content of the poly(1,2-propanediol ortho-phthalate): transparent, thermal, and mechanical properties. J Appl Polym Sci2013; 128: 3900–3905.
35.
HaoXJJefferyJLWilkieJS. Functionalised polysiloxanes as injectable, in situ curable accommodating intraocular lenses. Biomaterials2010; 31: 8153–8163.
36.
ZhangBTLiuBLDengXB. A novel approach for the preparation of organic-siloxane oligomers and the creation of hydrophobic surface. Appl Surf Sci2007; 254: 452–458.
37.
RamliMROthmanMBHArifinA. Cross-link network of polydimethylsiloxane via addition and condensation (RTV) mechanisms. Part I: synthesis and thermal properties. Polym Degrad Stabil2011; 96: 2064–2070.
38.
XuZJFanYRTangSC. Synthesis of addition liquid vinylsiloxane rubber. I. effect of vinyl silicone oil on mechanical property of silicone rubber. China Syn Rubber Indus2002; 25: 286–288.
