In this study, series of blends were prepared by blending unextracted polyamide-6 (PA6) and thermoplastic ester elastomer (TPEE) in certain ratios. The morphologies, thermal behaviors, and mechanical properties of blends have been investigated. Scanning electron microscope results revealed that the morphology of blends was improved significantly when the content of TPEE is less than 50 wt%. Tensile fracture surface images confirmed reactive compatibilization and stress-induced crystallization in blends. The effect of unextracted PA6 content on the elasticity and tensile strength of blends was also studied, and higher elongation rate at break and breaking strength could be achieved when the content of TPEE is ≥50 wt%. The most interesting finding in this study is that the glass transition temperature for rubber phase of blends shifts to lower temperature and decreases with the increase of unextracted PA6 content at certain ratios range.
GehringerMKopplerD. Neuerungen im TPE-Bereich. Gummi Fas Kunstst2006; 59(4): 224–225.
2.
RzymskiWMRaduschHJ. New thermoplastic elastomers. Polim Polym2005; 50.
3.
HonenPJM. New developments in solvent-based elastrometric polyurethane resins. Ink Maker2004; 82(5): 42–43.
4.
ReischMS. Stretchable plastics continue to expand. Chem Eng News2005; 83: 25–26.
5.
KrijgsmanJHuskenD,GaymansRJ. Synthesis and properties of thermoplastic elastomers based on PTMO and tetra-amide. Polymer2003; 44: 7573–7588.
6.
PuskasJEChenY. Biomedical application of commercial polymers and novel polyisobutylene-based thermoplastic elastomers for soft tissue replacement. Biomacromolecules2004; 5: 1141–1154.
7.
DongJYHongH,ChungTC. Synthesis of linear polyolefin elastomers containing divinylbenzene units and applications in cross-linking, functionalization, and graft reactions. Macromolecules2003; 36: 6000–6009.
8.
DrobnyJG. Handbook of thermoplastic elastomers. Norwich: William Andrew, 2007.
9.
AustinTCWilliamJFNelb II RobertG. Polyester amides suitable for injection molding. Patent US4129715, USA, 1978.
10.
MajPForichonN. Block polyetheramides. Patent US5166309, USA, 1992.
11.
YiCPengZWangH. Synthesis and characteristics of thermoplastic elastomer based on polyamide-6. Polym Int2011; 60: 1728–1736.
12.
Van Der SchuurMNoordoverB,GaymansRJ. Polyurethane elastomers with amide chain extenders of uniform length. Polymer2006; 47: 1091–1100.
13.
BegenirAMichielsenS,PourdeyhimiB. Melt-blowing thermoplastic polyurethane and polyether-block-amide elastomers: effect of processing conditions and crystallization on web properties. Polym Eng Sci2009; 49: 1340–1349.
14.
OkadaOKeskkulaH,PaulDR. Mechanical properties of blends of maleated ethylene-propylene rubber and nylon 6. Polymer2001; 42: 8715–8725.
15.
OkadaOKeskkulaH,PaulDR. Fracture toughness of Nylon-6 blends with maleated rubbers. J Polym Sci B Polym Phys2004; 42: 1739–1758.
16.
RoederJOliveiraRVBBeckerD. Compatibility effect on the thermal degradation behaviour of polypropylene blends with polyamide 6, ethylene propylene diene copolymer and polyurethane. Polym Degrad Stabil2005; 90: 481–487.
TanJDingYMHeXT. Abrasion resistance of thermoplastic polyurethane materials blended with ethylene-propylene-diene monomer rubber. J Appl Polym Sci2008; 110: 1851–1857.
19.
OkadaOKeskkulaHPaulDR. Nylon 6 as a modifier for maleated ethylene-propylene elastomers. Polymer1999; 40: 2699–2709.
20.
KimGHHwangSSChoBG. Reactive extrusion of polypropylene and nylon blends from commingled plastic wastes. Macromol Symp2007; 249–250: 485–492.
21.
KimIWhiteJL. Synthesis of polyamide-polyesters base random-block terpolymers in a twin screw extruder via reactive extrusion, process and properties. In: Antec 2004 conference proceeding Volume II: material (Society of plastics Engineers), 2809–2813.
22.
KitayamaNKeskkulaH,PaulDR. Reactive compatibilization of nylon 6/styrene-acrylonitrile copolymer blends: Part 2. Dispersed phase particle size. Polymer2000; 41: 8053–8060.
23.
KitayamaNKeskkulaH,PaulDR. Reactive compatibilization of nylon 6/styrene-acrylonitrile copolymer blends: Part 1. Phase inversion behavior. Polymer2000; 41: 8041–8052.
24.
DaiSYeL. Effect of SEPS as a novel compatibilizer on the properties and morphology of PP/PC/POE blends. J Appl Polym Sci2008; 108: 3531–3541.
25.
LauraDMKeskkulaHBarlowJW. Effect of glass fiber and maleated ethylene-propylene rubber content on the impact fracture parameters of nylon 6. Polymer2001; 42: 6161–6172.
26.
HuangJJKeskkulaH,PaulDR. Comparison of the toughening behavior of nylon 6 versus an amorphous polyamide using various maleated elastomers. Polymer2006; 47: 639–651.
27.
HuangJJKeskkulaH,PaulDR. Elastomer particle morphology in ternary blends of maleated and non-maleated ethylene-based elastomers with polyamides: Role of elastomer phase miscibility. Polymer2006; 47: 624–638.
28.
OhlssonBHassanderH,TörnellB. Improved compatibility between polyamide and polypropylene by the use of maleic anhydride grafted SEBS. Polymer1998; 39(26): 6705–6714.
29.
KitayamaNKeskkulaH,PaulDR. Reactive compatibilization of nylon 6/styrene—Acrylonitrile copolymer blends: Part 3. Tensile stress—Strain behavior. Polymer2001; 42: 3751–3759.
30.
AleksandrovicVPoletiD,DjonlagicJ. Poly(ether-ester)s modified with different amounts of fumaric moieties. Polymer2002; 43: 3199–3208.
31.
SzymczykA. Structure and properties of new polyester elastomers composed of poly (trimethylene terephthalate) and poly(ethylene oxide). Eur Polym J2009; 45: 2653–2664.
32.
García-GaitánBPérez-GonzálezMDP,Martínez-RichaA. Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate). J Polym Sci A Polym Chem2004; 42: 4448–4457.
33.
SzymczykARosłaniecZ. Degradation and stabilization of thermoplastic ether-ester elastomers (TPE-E). Poli Polym2006; 51: 627–642.
34.
Saint-LoupRRobinJJ,BoutevinB. Synthesis of poly(ethylene terephthalate)-block-poly (tetramethylene oxide) copolymer by direct polyesterification of reactive oligomers. Macromol Chem Phys2003; 204: 970–982.
35.
StribeckNFakirovSApostolovAA. Deformation behavior of PET, PBT and PBT-based thermoplastic elastomers as revealed by SAXS from synchrotron. Macromol Chem Phys2003; 204: 1000–1013.
36.
LeeTYLeeCHChoS. Enhancement of physical properties of thermoplastic polyether-ester elastomer by reactive extrusion with chain extender. Polym Bull2011; 66(7): 979–990.
37.
ChoSJangYKimD. High molecular weight thermoplastic polyether ester elastomer by reactive extrusion. Polym Eng Sci2009; 49: 1456–1460.
38.
OkadaOKeskkulaH,PaulDR. Fracture toughness of blends of nylon 6 with maleated elastomers. Prepared for Presentation at the AIChE Annual Meeting, Austin, TX, 7–12 November 2004, pp. 5523–5525.
39.
RathTKumarS,MahalingRN. Mechanical and morphological study of polyphenylene sulfide/liquid crystalline polymer blends compatibilized with a maleic anhydride grafted copolymer. J Appl Polym Sci2007; 106(6): 3721–3728.
40.
AhmadSHRasidR,SuripSN. Mechanical and fracture toughness behavior of TPNR nanoblends. J Compos Mater2007; 41(17): 2147–2159.
MallakpourSRafiemanzelatF. Synthesis, characterization and properties of a series of copoly(amide-imide-ether-urethane)s with a new hard segment constituent: Study of the effect of hard segment content. High Perform Polym2008; 20(2): 146–165.
43.
LemoineMBrachaisCH,BoniG. Characterizations of thermoplastic block elastomers based on polybutadiene and epsilon-caprolactone. J Macromol Sci A2010; 47(8): 794–803.
