The investigation of effects of environmental conditions on fatigue strength and spring stiffness of rubber materials

Abstract

Rubber materials are widely used in many applications. The most important applications of rubber materials are seals, tires, gaskets, hoses, hydraulic-pneumatic systems and vibration absorbers. Today, the working environment of rubbers varies. It has become important to see the responses of developed rubber materials to these challenging working conditions. Most rubber parts are subjected to fluctuating loads that can cause fatigue damage in their work environments. In this study, fatigue strength and spring stiffness of rubber materials under different environmental conditions is investigated. Three general factors that affect fatigue strength of rubber materials are the effects of mechanical loading, environmental effects and the effects of rubber formulation. In this study these factors are examined. For this purpose, fatigue strength and spring stiffness of natural rubber (NR), specially developed natural rubber (S-NR) and ethylene propylene diene monomer (EPDM) rubber were examined. The fatigue tests of rubber samples were performed before and after aging processes. During the study, the static and dynamic stiffness values of the rubber materials were examined before and after aging processes. As a result of experimental study, it was found that fatigue life decreases as a result of accelerated aging and annealing in heated oil processes for NR, EPDM and S-NR samples. Annealing in heated oil process is more effective in reducing fatigue life of rubber samples compared to accelerated aging. In this study, it is seen that S-NR rubber has the highest fatigue strength among rubber materials tested. It has been determined that production of samples with the semi-active vulcanization system is the most important parameter in increasing fatigue strength. In S-NR samples produced with the semi-active vulcanization system, the loss in spring stiffness occurring under different aging conditions is less compared to the loss in spring stiffness in conventional vulcanization system produced NR and EPDM samples.

Keywords

Rubber environmental conditions fatigue spring stiffness aging

Get full access to this article

View all access options for this article.

References

Sommer

. Troubleshooting rubber problems. 1st edn. Munich: Hanser Publishers, 2013.

Spanos

Beelen

. NR replacement by ultra high molecular weight EPDM in dynamic application. In: 186th Technical meeting of the Rubber Division ACS, Nashville, USA, 14–16 October 2014.

Spanos

Beelen

Gögelein

, et al. Formulating ultra high molecular weight EPDM to match NR fatigue and dynamic performance. In: 188th Technical meeting of the Rubber Division ACS, Clevelant, USA, 12–15 October 2015.

Dick

. How to improve rubber compounds. 2nd edn. Munich: Hanser Publishers, 2014.

Higgins

. Engineering metallurgy-applied physical metallurgy. 6th edn. London: Arnold, 1993, pp. 111–112.

Tee

Loo

Andriyana

. Recent advances on fatigue of rubber after the literature survey by Mars and Fatemi in 2002 and 2004. Int J Fatigue 2018; 110: 115–129.

Gent

. Engineering with rubber: how to design rubber components. 3rd edn. Munich: Hanser Publishers, 2012.

Mars

Fatemi

Factors that affect the fatigue life of rubber: a literature survey. J Rub Chem Technol 2004; 77: 391–412.

Candau

Chazeau

Chenal

, et al. Strain induced crystallization and melting of natural rubber during dynamic cycles. Phys Chem Chem Phys 2015; 17(23): 15331–15338.

10.

Legorju-Jago

Bathias

. Fatigue initiation and propagation in natural and synthetic rubbers. Int J Fatigue 2002; 24(2): 85–92.

11.

Chou

Huang

Lin

. Effects of thermal aging on fatigue of carbon black reinforced EPDM rubber. J Appl Polym Sci 2007; 103(2): 1244–1251.

12.

Neuhaus

Lion

Johlitz

, et al. Fatigue behaviour of an elastomer under consideration of ageing effects. Int J Fatigue 2017; 104: 72–80.

13.

Sahakaro

Talma

Datta

, et al. Blending of NR/BR/EPDM by reactive processing for tire sidewall applications. II. Characterization. J Appl Polym Sci 2007; 103(4): 2547–2554.

14.

Rivin

. Handbook on stiffness & damping in mechanical design. New York, NY: ASME Press, 2010, pp. 3–8.

15.

Hamaguchi

Samejima

Kani

. A study of aging effect on rubber bearings after about twenty years in use. AIJ J Technol Des 2012; 15(30): 393–398.

16.

Xiang

Huang

Zheng

, et al. Investigation on the thermal oxidative aging mechanism and lifetime prediction of butyl rubber. Macromol Res 2012; 21(1): 10–16.

17.

Hoffman

. Rubber technology handbook. 1st edn. New York, NY: Hanser Publishers, 1989.

18.

Simpson

. Rubber basics. 1st edn. United Kingdom: Rapra Technology Limited, 2002.

19.

Rodgers

Waddell

Rubber compounding. In: Cohen

D’ Sidocky

(eds) Encyclopedia of polymer science and technology. 3rd edn. United Kingdom: Wiley-Blackwell, 2004, pp. 612–699.

20.

Ciesielski

. An introduction to rubber technology. 1st edn. United Kingdom: Rapra Technology Limited, 1999.

21.

Manson

. Behavior of materials under conditions of thermal stresses. National Advisory Committee for Aeronautics, Report no. 1170, 1954.

22.

Mitchell

MR.

Fundamentals of modern fatigue analysis for design. In: ASM Handbook, Vol. 19: Fatigue and fracture. USA: ASM Handbook Committee, 1996, pp. 227–249.

23.

Major

Feichter

Steinberger

, et al. The test frequency dependence of the fatigue behavior of elastomers. In: Fracture of nano and engineering materials and structures, Alexandroupolis, Greece, 3–7 July 2006.

24.

Coran

AY.

Vulcanization. In: Mark

Erman

Roland

(eds) The science and technology of rubber. 4th edn. Cambridge: Academic Press, 2013, pp. 337–381.

25.

Whelan

Lee

. Developments in rubber technology, Vol. 1. 1st edn. London: Applied Science Publishers, 1979, pp. 1–151.

26.

Antioxidants & Antidegradants. http://www.nocil.com/Downloadfile/ETechnicalNote-Antioxidants-Dec2010.pdf (2010, accessed 3 February 2020).