Polymer composite film containing expanded polystyrene wastes, poly (ethylene-co-vinyl acetate), epoxidized neem oil and cassava starch was prepared by solution casting technique. The composite film was characterized by FTIR, NMR, X-ray diffraction, and FESEM analysis. The thermal stability of the polymer composite film was studied by TGA and DSC. Melting point, glass transition temperature and cold-crystallization temperature of the composite films were found to decrease with increasing percentages of epoxidized neem oil plasticizer, which point towards the enhanced segmental mobility of the polymer chain. TGA results show that plasticization has enhanced the thermal stability of the polymer composite. The prepared films show improved percentage elongation with moderate tensile strength and Young’s modulus. Soil burial test was adopted to check the biodegradability. The lower values of water absorption indicate the water-resistant nature of the films. This green synthetic approach offers a simple means of up-cycling waste thermocol in a cost-effective manner which imparts partial biodegradability with potential for packaging film and eliminates the usage of toxic chemicals.
ShahDU.Towards sustainable polymers and plastics: NMR spectroscopic analysis and characterisation of vernonia seed (Vernonia galamensis) oil and epoxidised soya bean seed (Glycine max) oil. Scitech J2004; 1: 13.
2.
De Leon-CondesCARoa-MoralesGMartinez-BarreraG, et al.A novel sulfonated waste polystyrene/iron oxide nanoparticles composite: green synthesis, characterization and applications. J Environ Chem Eng2019; 7: 102841.
3.
UttaravalliANDindaSGidlaBR. Scientific and engineering aspects of recycling and reuse of expanded polystyrene waste for various potential applications: a review. Process Saf Environ2020; 137: 140–148.
4.
AyeleruOODlovaSNtuliF, et al.Synthesis and characterization of SnO2 nanofiller from recycled expanded polystyrene. Procedia Manuf2019; 30: 635–641.
5.
ZareY. Recycled Polymers: Properties and Applications, Vol. 2. Leatherhead: Smithers Information Limited, 2015,pp. 27.
6.
ArvanitoyannisIBiliaderisCG. Physical properties of polyol-plasticized edible blends made of methyl cellulose and soluble starch. Carbohydr Polym1999; 38: 47–58.
7.
MoulayS. Functionalized polystyrene and polystyrene-containing material platforms for various applications. Polym Plast Technol Eng2018; 57: 1045–1092.
8.
FonsecaWSMengXDengD. Trash to treasure: transforming waste polystyrene cups into negative electrode materials for sodium ion batteries. ACS Sustain Chem Eng2015; 3: 2153–2159.
9.
RuziwaDChaukuraNGwenziW, et al.Removal of Zn2+ and Pb2+ ions from aqueous solution using sulphonated waste polystyrene. J Environ Chem Eng2015; 3: 2528–2537.
10.
SelukaNLandeCVIngoleCG. Waste thermocol to adhesive for better environment. Int J Innov Res Adv Eng2014; 1: 98–101.
11.
JalalNMJaburARHamzaMS, et al.Sulfonated electrospun polystyrene as cation exchange membranes for fuel cells. Energy Rep2020; 6: 287–298.
12.
NgugiHNKaluliJWAbiero-GariyZ. Use of expanded polystyrene technology and materials recycling for building construction in Kenya. Am J Eng Technol Manage2017; 2: 64–71.
13.
HuTChenJLuX, et al.Synthesis of few-layer graphene sheets from waste expanded polystyrene by dense Fe cluster catalysis. ACS Omega2020; 5: 4075–4082.
14.
FaragunaFPötschkePPionteckJ. Preparation of polystyrene nanocomposites with functionalized carbon nanotubes by melt and solution mixing: investigation of dispersion, melt rheology, electrical and thermal properties. Polymer2017; 132: 325–341.
15.
ChaukuraNGwenziWBunhuT, et al.Potential uses and value-added products derived from waste polystyrene in developing countries: a review. Resour Conserv Recycl2016; 107: 157–165.
16.
MeierMAMetzgerJOSchubertUS. Plant oil renewable resources as green alternatives in polymer science. Chem Soc Rev2007; 36: 1788–1802.
17.
JiaPXiaHTangK, et al.Plasticizers derived from biomass resources: a short review. Polymers2018; 10: 1303.
18.
ChaudhariABTatiyaPDHedaooRK, et al.Polyurethane prepared from neem oil polyesteramides for self-healing anticorrosive coatings. Ind Eng Chem Res2013; 52: 10189–10197.
19.
SchlemmerDDe OliveiraEAraújo SalesM. Polystyrene/thermoplastic starch blends with different plasticizers: preparation and thermal characterization. J Therm Anal Calorim2007; 87: 635–638.
20.
DixitSYadavVL. Comparative study of polystyrene/chemically modified wheat straw composite for green packaging application. Polym Bull2020; 77: 1307–1326.
21.
ParkSJJinFLLeeJR. Synthesis and thermal properties of epoxidized vegetable oil. Macromol Rapid Commun2004; 25: 724–727.
22.
SamarthNBMahanwarPA. Modified vegetable oil based additives as a future polymeric material. Open J Org Polym Mater2015; 5: 1.
23.
ChiengBWIbrahimNAThenYY, et al.Epoxidized vegetable oils plasticized poly (lactic acid) biocomposites: mechanical, thermal and morphology properties. Molecules2014; 19: 16024–16038.
24.
ChoiJSParkWH. Effect of biodegradable plasticizers on thermal and mechanical properties of poly (3-hydroxybutyrate). Polym Test2004; 23: 455–460.
25.
PetrovićZSZlatanićALavaCC, et al.Epoxidation of soybean oil in toluene with peroxoacetic and peroxoformic acids – kinetics and side reactions. Eur J Lipid Sci Technol2002; 104: 293–299.
26.
LathiPSMattiassonB. Green approach for the preparation of biodegradable lubricant base stock from epoxidized vegetable oil. Appl Catal B2007; 69: 207–212.
27.
AdhvaryuAErhanSPerezJ. Tribological studies of thermally and chemically modified vegetable oils for use as environmentally friendly lubricants. Wear2004; 257: 359–367.
28.
Al-MullaEAJIbrahimNABShameliK, et al.Effect of epoxidized palm oil on the mechanical and morphological properties of a PLA–PCL blend. Res Chem Intermed2014; 40: 689–698.
29.
GamagePKFaridASKarunanayakeL. Kinetics of degradation of PVC-containing novel neem oil as stabilizer. J Appl Polym Sci2009; 112: 2151–2165.
30.
ChowdhuryAAnthonyP. A review on biodegradable polymeric materials derived from vegetable oils for diverse applications. Int J Sci Res2016; 5: 1786–1791.
31.
KiatkamjornwongSSonsukMWittayapichetS, et al.Degradation of styrene-g-cassava starch filled polystyrene plastics. Polym Degrad Stab1999; 66: 323–335.
32.
HuangTMiuraMNobukawaS, et al.Chain packing and its anomalous effect on mechanical toughness for poly (lactic acid). Biomacromolecules2015; 16: 1660–1666.
33.
BradleyWCantwellWJKauschHH. Viscoelastic creep crack growth: a review of fracture mechanical analyses. Mech Time Depend Mater1997; 1: 241–268.
LuzinovIXiKPagnoulleC, et al.Composition effect on the core–shell morphology and mechanical properties of ternary polystyrene/styrene–butadiene rubber/polyethylene blends. Polymer1999; 40: 2511–2520.
36.
LunaCBBSiqueiraDDAraújoEM, et al.Toughening of polystyrene using styrene-butadiene rubber (SBRr) waste from the shoe industry. REM Int Eng J2018; 71: 253–260.
37.
ChengSKChenPTWangCC, et al.Mechanical properties of ethylene–vinyl acetate/polystyrene blends studied by in situ polymerization. J Appl Polym Sci2003; 88: 699–705.
38.
LunaCBBSiqueiraDDAraújoEM, et al.Photodegradation of polystyrene/rubber waste blends compatibilized with SBS copolymer. J Elastomers Plast2020; 52: 356–379.
39.
KugimotoDKoudaSYamaguchiM. Improvement of mechanical toughness of poly (lactic acid) by addition of ethylene-vinyl acetate copolymer. Polymer Test2019; 80: 106021.
40.
UmarSAbdelmalikASadiqU. Synthesis and characterization of a potential bio-based dielectric fluid from neem oil seed. Ind Crops Prod2018; 115: 117–123.
41.
PoormohammadianSJDarvishiPDezfuliAMG. Investigating the structural effect of electrospun nano-fibrous polymeric films on water vapor transmission. Chin J Chem Eng2019; 27: 100–109.
42.
PhuaYLauNSudeshK, et al.Biodegradability studies of poly (butylene succinate)/organo-montmorillonite nanocomposites under controlled compost soil conditions: effects of clay loading and compatibiliser. Polym Degrad Stab2012; 97: 1345–1354.
43.
TeeYBTalibRAAbdanK, et al.Comparative study of chemical, mechanical, thermal, and barrier properties of poly (lactic acid) plasticized with epoxidized soybean oil and epoxidized palm oil. BioResources2016; 11: 1518–1540.
44.
RatanakamnuanUAht-OngD. Preparation and characterization of low-density polyethylene/banana starch films containing compatibilizer and photosensitizer. J Appl Polym Sci2006; 100: 2717–2724.
45.
ManafOJuraijKSneha SundaranP, et al.Polyethylene-g-starch nanoparticle biocomposites: physicochemical properties and biodegradation studies. Polym Compos2018; 39: E426–E440.
46.
ChiengBWIbrahimNAYunusWMZW, et al.Plasticized poly (lactic acid) with low molecular weight poly (ethylene glycol): mechanical, thermal, and morphology properties. J Appl Polym Sci2013; 130: 4576–4580.
47.
SilverajahVIbrahimNAYunusWMZW, et al.A comparative study on the mechanical, thermal and morphological characterization of poly (lactic acid)/epoxidized palm oil blend. Int J Mol Sci2012; 13: 5878–5898.
48.
KapanenASchettiniEVoxG, et al.Performance and environmental impact of biodegradable films in agriculture: a field study on protected cultivation. J Polym Environ2008; 16: 109–122.
49.
OpreaS. Preparation and characterization of the agar/polyurethane composites. J Compos Mater2011; 45: 2039–2045.
