Epoxidized polybutadiene rubber as an effective compatibilizer for acrylonitrile butadiene rubber and polybutadiene rubber blend

Abstract

In the present study, epoxidized polybutadiene rubber (EBR; 30 mol% epoxidation) was synthesized using commercial-grade cis-polybutadiene rubber (BR). The EBR was successfully utilized as an effective compatibilizer between two incompatible elastomers, namely polar acrylonitrile butadiene rubber (NBR) and non-polar polybutadiene rubber (BR). The NBR and BR were blended in varied formulations and studied for morphological and mechanical properties. The observed properties of the blends containing EBR, as a compatibilizer, were compared with analogous blends without EBR. The optimum loading of EBR in NBR/BR formulations was found to be 5 phr (parts per hundred gram of rubber). The significant improvement in various mechanical properties such as tensile strength, tensile modulus, elongation at break and hardness were observed in presence of optimum loading of EBR in NBR/BR blends. Atomic Force Microscopy (AFM), Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analyser (DMA) studies revealed that the compatibility between two incompatible rubbers improved in the presence of EBR. The results observed with EBR-compatibilized blends revealed that EBR can be used as an effective compatibilizer between two incompatible rubbers (NBR and BR).

Keywords

Rubber blends epoxidized polybutadiene rubber acrylonitrile butadiene rubber

Get full access to this article

View all access options for this article.

References

Roland

. Immiscible rubber blends. In: Visakh

(ed) Advanced structured materials. Berlin Heidelberg: Springer-Verlag, 2013, pp. 167–181.

Mangaraj

. Elastomer blends. Rubber Chem Technol 2002; 75: 365–427.

Banerjee

Burbine

Shivaprakash

, et al. 3D-Printable PP/SEBS thermoplastic elastomeric blends: preparation and properties. Polymers 2019; 11: 347–360.

de Sousa

FDB

Zanchet

Marczynski

, et al. Devulcanized EPDM without paraffinic oil in the production of blends as a potential application of the residues from automobile industry. J Mater Cycles Waste Manage 2020; 22: 273–284.

Akkapeddi

. Commercial polymer blends. In: Utracki

Wilkie

(eds) Polymer blends handbook. Salmon Tower Building New York: Springer, Dordrecht, 2014. DOI:10.1007/978-94-007-6064-6_22.

Seier

Stanic

Koch

, et al. Effect of different compatibilization systems on the rheological, mechanical and morphological properties of polypropylene/polystyrene blends. Polymers 2020; 12(10): 2335.

Panigrahi

Sreenath

Kotnees

. Unique compatibilized thermoplastic elastomer with high strength and remarkable ductility: effect of multiple point interactions within a rubber-plastic blend. ACS Omega 2020; 22: 12789–12808.

Botros

Tawfic

. Preparation and characteristics of EPDM/NBR rubber blends with BIIR as compatibilizer. Polym Plast Technol Engineer 2005; 44: 209–227.

Menon

ARR

Visconte

LLY.

Studies on blends of polychloroprene and polybutadiene rubber containing phosphorylated cardanol prepolymer: melt rheology, cure characteristics, and mechanical properties. J Appl Polymer Sci 2006; 102: 3195–3200.

10.

Noriman

Ismail

Rashid

. Characterization of styrene butadiene rubber/recycled acrylonitrile-butadiene rubber (SBR/NBR) blends: the effects of epoxidized natural rubber (ENR-50) as a compatibilizer. Polym Testing 2010; 29: 200–208.

11.

Pazur

Cormier

Korhan-Taymaz

. The effect of acrylonitrile content on the thermo-oxidative aging of nitrile rubber. Rubber Chem Technol 2014; 87: 53–69.

12.

Cai

Yang

, et al. Effects of acrylonitrile content of nitrile rubber on mechanical properties of polyamide 6/nitrile rubber blends. Mater Res Express 2019; 6: 125362–125368.

13.

Bukhina

Kurlyand

SK.

Low-temperature behaviour of elastomers. 1st ed. Boca Raton, FL: CRC Press, 2007.

14.

Srivastava

Maity

Basak

, et al. Role of catalysis in sustainable production of synthetic elastomers. J Chem Sci 2014; 126: 415–427.

15.

Chen

Lin

Zhao

, et al. Reconstructing the mechanical response of polybutadiene rubber based on micro-structural evolution in strain-temperature space: entropic elasticity and strain-induced crystallization as the bridges. Soft Matter 2020; 16: 447–455.

16.

Srivastava

Basak

Maiti

, et al. Synthesis and utilization of epoxidized polybutadiene rubber as an alternate compatibilizer in green-tire composites. Intern J Ind Chem 2017; 8: 411–424.

17.

Yehia

Mansour

Stoll

. Detection of compatibility of some rubber blends by DSC. J Ther Anal Calor 1997; 48: 1299–1310.

18.

Hayeemase

Ismail

. Compatibilized NR/recycled-EPDM rubber blends by bio-compatibilizer. Intern J Polym Anal Character 2016; 21: 396–407.

19.

El-Sabbagh

. Compatibility study of natural rubber and ethylene–propylene diene rubber blends. Polym Testing 2003; 22: 93–100.

20.

Varkey

Augustine

Thomas

. Thermal degradation of natural rubber/styrene butadiene rubber latex blends by thermogravimetric method. Polym Plast Technol Engineer 2010; 39: 415–435.