Rubber/Plastic Blends Based on Devulcanized Ground Tire Rubber

Abstract

Tire and waste rubber recycling is a very important issue facing the rubber industry and science community. Compounding the ground rubber tire (GRT) with commercial polyolefins is a possible and effective way of used tire recycling which can provide new rubber/plastic blends at a much lower cost. In the present study, GRT and ultrasonically devulcanized GRT (DGRT) are incorporated into a polypropylene. In addition, DGRT is compounded and dynamically revulcanized (RGRT) in polypropylene. Compounding and dynamic revulcanization is carried out by means of a twin screw extruder and Brabender internal mixer. Sulfur and phenolic resin curing systems as well as various compatibilizers are used. Mechanical properties, rheology and morphology as well as thermal stability and melting behavior of the resulting rubber/plastic blends are studied. The obtained blends show an excellent processability along with impact strength higher than that of pure polypropylene. Among various compatibilizers and cure systems utilized, the phenolic resin cure system and maleic anhydride grafted PP compatibilizer can significantly improve the Young's modulus and tensile strength of plastic/rubber blends.

Keywords

devulcanized rubber polypropylene dynamic vulcanization twin screw extruder internal mixer compatibilizer mechanical property rheology and morphology

Get full access to this article

View all access options for this article.

References

1. B. M. Walker and C. P. Rader . 1988. Handbook of Thermoplastic Elastomers. New York: Van Nostrand Reinhold Company.

2. N. R. Legge , G. Holden and H. E. Schroeder . 1987. Thermoplastic Elastomers. New York: Hanser Publishers.

3. M. M. Nir , J. Miltz and A. Ram . 1993. Plastics Engineering, (March), 75.

4. J. Paul . 1986. Encyclopedia of Polymer Science and Engineering, H. Mark , Ed., 2nd ed., New York: John Wiley & Sons: 14-787.

5. R. D. Deanin and S. M. Hashemiolya . 1987. Polym. Mater. Sci. Eng., 57:212.

6. E. L. Rodriguez . 1988. Polym. Eng. Sci., 28:1455.

7. A. A. Phadke and S. K. De . 1986. Polym. Eng. Sci., 26:1079.

8. P. Rajalingam and W. E. Baker . 1992. Rubber Chem. Technol., 65:908.

9. K. Oliphant and W. E. Baker . 1993. Polym. Eng. Sci., 33:166.

10.

10. D. Touchman and S. L. Rosen . 1978. J. Elast. Plast., 10:115.

11.

11. F. J. Stark, Jr. and A. Leigton . 1983. Rubber World, 12:3.

12.

12. A. I. Isayev, U.S. Patent 5,258,413 (Nov. 2, 1993).

13.

13. A. I. Isayev and J. Chen, U.S. Patent 5,284,625 (Feb. 8, 1994).

14.

14. A. I. Isayev , J. Chen and A. Tukachinsky . 1995. Rubber Chem. Technol., 68:1.

15.

15. P. Galli , S. Danesi and T. Simonazzi . 1984. Polym. Eng. Sci., 24:544.

16.

16. A. M. Gessler, U.S. Patent 3,037,954 (Jun. 5, 1962).

17.

17. A. Y. Coran and R. Patel . 1980. Rubber Chem. Technol., 53:141.

18.

18. F. Cai and A. I. Isayev . 1993. J. Elast. Plast., 25:74.

19.

19. F. Cai and A. I. Isayev . 1993. J. Elast. Plast., 25:249.

20.

20. S. Chamulitrat. 1993. Master Thesis, The University of Akron.

21.

21. S. K. De and A. K. Bhowmick . 1990. Thermoplastic Elastomers from Rubber-Plastic Blends. New York: Ellis Horwood.

22.

22. S. Abdou-Sabet and R. P. Patel . 1991. Rubber Chem. Technol., 64:769.

23.

23. A. I. Coran and R. Patel . 1983. Rubber Chem. Technol., 56:1045.

24.

24. J. Folkes and P. S. Hope . 1993. Polymer Blends and Alloys. India: Blackie Academic & Professional.

25.

25. V. Y. Levin , S. H. Kim , A. I. Isayev , J. Massey and E. Von Meerwall . 1996. Rubber Chem. Technol., 69:104.

26.

26. C. D. Han . 1981. Multiphase Flow in Polymer Processing. New York: Academic Press.

27.

27. D. R. Paul and S. Newman . 1978. Polymer Blends. New York: Academic Press.

28.

28. A. P. Plochocki and S. S. Dagli . 1989. Polym. Eng. Sci., 29:61.

29.

29. A. J. Moffett and M. J. Dekkers . 1992. Polym. Eng. Sci., 32:1.

30.

30. Y. P. Khanna . 1990. J. Appl. Polymer Science, 40:569.

31.

31. Y. Aoki and M. Watanabe . 1992. Polym. Eng. Sci., 32:878.

32.

32. E. Martuscelli , F. Riva , C. Sellitti and C. Silvestre . 1985. Polymer, 26:270.