Abstract
Artificial cadaveric femoral neck fractures were internally fixed with five different devices and subjected to cyclical loading of 0–1.0 kilonewtons (approximately one body weight) whilst in an anatomical position. Displacement of the proximal fragment was detected by a transducer and charted. Bone strength was assessed by a preliminary control loading phase on the intact bone. Efficiency of each fracture fixator could then be directly compared by the relative movement in each case.
Five specimens each were tested with Moore's Pins, Trifin Nail, Garden Screws and a sliding screw-plate (OEC Ltd). By the criteria of the experiment, which put a severe shearing load on the implant, none of these devices reliably bore the representative body weight. An extended barrel-plate, which supported the sliding screw almost up to the fracture line, was then made. This device, employing some of Charnley's concepts, tolerated body weight in four cases out of five.