Experiments on step climbing and simulations on inverse pendulum control using robotic wheelchair with inverse pendulum control

Abstract

A robotic wheelchair with inverse pendulum control has been proposed in this paper. By using the robotic wheelchair, a wheelchair-bound person can climb over a step up to about 7 cm without a helper's assistance. The robotic wheelchair moves on flat ground using four wheels. It raises its front wheels in front of a step, and maintains the inverse pendulum control. A user riding can go forwards and backwards using his/her body inclination maintaining the inverse pendulum control. The inverse pendulum control is stopped when the front wheels proceed over a step. After the front wheels land on the step, the robotic wheelchair can climb over the step, assisted by DC motor force. In order to raise the front wheels using small DC motors, the robotic wheelchair can move its rear wheel drive shafts. This paper presents the experiments on step climbing, the modelling of the control system, and the simulations on the inverse pendulum control. The step climbing function of the proposed robotic wheelchair has been successfully tested.

Keywords

inverse pendulum control robotic system simulation step climbing wheelchair.

Get full access to this article

View all access options for this article.

References

Doyle, J.C. , Glover, K. , Khargonekar, P. and Francis, B. 1989: State space solutions to H2 and H∞ control problems . IEEE Transactions on Automatic Control AC-34 831.

Hashino, S. 1996: Daily life support robot. Journal of the Robotics Society of Japan 14, 614—18 (in Japanese).

Ifukube, T. 1993: Human interface technology required for supporting devices of the elderly. Journal of the Robotics Society of Japan 11, 633—38 (in Japanese).

Koyanagi, E. 1991: Master thesis, Tsukuba University (in Japanese).

Matsumoto, O. , Kajita, S. and Tani, K. 1990: Estimation and control of the attitude of a dynamic mobile robot using internal sensors. Journal of the Robotics Society of Japan 8, 541—46 (in Japanese).

Takahashi, Y. and Hayase, M. 1996: Design of H∞ controller for precise positioning and comparison with PID control. Transactions of the Institute of Measurement and Control 18, 175—82.

Takahashi, Y. and Takahashi, A. 1989: A direct linear drive system with a laser interferometer and digital state variable feedback control. Transactions of the Institute of Measurement and Control 11, 155—62.

Takahashi, Y. and Takahashi, H. 2002: Precise positioning control with double feedback loop for ultralarge scale integrated manufacturing machine. Review of Scientific Instruments 73, 2791—96.

Takahashi, Y. and Uchida, N. 1990: A scheme for reducing vibration during precise positioning control. Review of Scientific Instruments 61, 3883—89.

10.

Takahashi, Y. , Ogawa, S. and Machida, S. 2002: Mechanical design and control system of robotic wheelchair with inverse pendulum control. Transactions of the Institute of Measurement and Control 24, 355—68.