Blend modified recurrent Gegenbauer orthogonal polynomial neural network control for six-phase copper rotor induction motor servo-driven continuously variable transmission system using amended artificial bee colony optimization

Abstract

Because the non-linear and time-varying characteristics of the continuously variable transmission (CVT) system driven by using a six-phase copper rotor induction motor (IM) are unknown, improving the control performance of the linear control design is time consuming. To overcome difficulties in the design of a linear controller for the six-phase copper rotor IM servo-driven CVT system with lumped non-linear load disturbances, a blend modified recurrent Gegenbauer orthogonal polynomial neural network (NN) control system, which has the online learning capability to return to the non-linear time-varying system, was developed. The blend modified recurrent Gegenbauer orthogonal polynomial NN control system can perform overseer control, modified recurrent Gegenbauer orthogonal polynomial NN control and recompensed control. Moreover, the adaptation law of online parameters in the modified recurrent Gegenbauer orthogonal polynomial NN is based on the Lyapunov stability theorem. The use of amended artificial bee colony optimization (ABCO) yielded two optimal learning rates for the parameters, which helped improve convergence. Finally, comparison of the experimental results of the present study with those of previous studies demonstrated the high control performance of the proposed control scheme.

Keywords

Artificial bee colony optimization continuously variable transmission Lyapunov stability modified recurrent Gegenbauer orthogonal polynomial neural network

Get full access to this article

View all access options for this article.

References

Ahrari

Atai

(2010) Grenade explosion method-a novel tool for optimization of multimodal functions. Applied Soft Computing 10: 1132–140.

Alizadegan

Asady

Ahmadpour

(2013) Two modified versions of artificial bee colony algorithm. Applied Mathematics and Computation 225: 601–609.

Astrom

Hagglund

(1995) PID Controller: Theory, Design, and Tuning. Research Triangle Park, NC: Instrument Society of America.

Astrom

Wittenmark

(1995) Adaptive Control. New York: Addison-Wesley.

Belmehdi

(2001) Generalized Gegenbauer orthogonal polynomials. Journal of Computational and Applied Mathematics 133: 195–205.

Biswas

Das

Debchoudhury

. (2014) Co-evolving bee colonies by forager migration: A multi-swarm based artificial bee colony algorithm for global search space. Applied Mathematics and Computation 232: 216–234.

Bojoi

Lazzari

Profumo

. (2003) Digital field-oriented control for dual three-phase induction motor drives. IEEE Transaction on Industry Applications 39: 752–760.

Brdys

Kulawski

(1999) Dynamic neural controllers for induction motor. IEEE Transactions on Neural Networks 10: 340–355.

Brush

Kirtley

Peters

(2007) Die-cast copper rotors as strategy for improving induction motor efficiency. In: Electrical Insulation Conference and Electrical Manufacturing Exhibition Organization, Nashville, TN, 22–24 October, pp. 322–327.

10.

Carbone

Mangialardi

Bonsen

. (2007) CVT dynamics: theory and experiments. Mechanism and Machine Theory 42: 409–428.

11.

Chow

TWS

Fang

(1998) A recurrent neural-network-based real-time learning control strategy applying to nonlinear systems with unknown dynamics. IEEE Transactions on Industrial Electronics 45: 151–161.

12.

Demirci

Gokasan

(2013) Adaptive optimal control allocation using Lagrangian neural networks for stability control of a 4WS–4WD electric vehicle. Transactions of the Institute of Measurement and Control 35: 1139–1151.

13.

Grino

Cembrano

Torras

(2000) Nonlinear system identification using additive dynamic neural networks–two on-line approaches. IEEE Transactions on Circuits and Systems – I 471: 150–165.

14.

Guzzella

Schmid

(1995) Feedback linearization of spark-ignition engines with continuously variable transmissions. IEEE Transactions on Control Systems Technology 3: 54–58.

15.

Hagglund

Astrom

(2002) Revisiting the Ziegler-Nichols tuning rules for PI control. Asian Journal of Control 4: 364–380.

16.

Hagglund

Astrom

(2004) Revisiting the Ziegler–Nichols tuning rules for PI control-part II: the frequency response method. Asian Journal of Control 6: 469–482.

17.

Karaboga

(2005) An idea based on honey bee swarm for numerical optimization. Technical Report TR06, Computer Engineering Department, Erciyes University, Turkey.

18.

Karaboga

Basturk

(2007a) A powerful and efficient algorithm for numerical function optimization: artificial bee colony (ABC) algorithm. Journal of Global Optimization 39: 459–471.

19.

Karaboga

Basturk

(2007b) Artificial bee colony (ABC) optimization algorithm for solving constrained optimization problems. Lecture Notes in Artificial Intelligence 4529: 789–798.

20.

Karaboga

Basturk

(2008) On the performance of artificial bee colony (ABC) algorithm. Applied Soft Computing 8: 687–697.

21.

Kim

Vachtsevanos

(2000) Fuzzy logic ratio control for a CVT hydraulic module. In: Proceedings of the IEEE Symposium on Intelligent Control, Rio, Greece, 17–19 July, pp. 151–156.

22.

Chen

(2012) Adaptive speed control of a PMSM servo system using an RBFN disturbance observer. Transactions of the Institute of Measurement and Control 34: 615–626.

23.

Liang

Yang

. (2012) Experience in China on the die-casting of copper rotors for induction motors. In: IEEE International Conference on Electrical Machines, Marseille, France, 2–5 September, pp. 254–258.

24.

Lin

(2014a) A novel hybrid recurrent wavelet neural network control of PMSM servo-drive system for electric scooter. Turkish Journal of Electrical Engineering and Computer Sciences 22: 1056–1175.

25.

Lin

(2014b) Hybrid recurrent wavelet neural network control of PMSM servo-drive system for electric scooter. International Journal of Control, Automation and Systems 12: 177–187.

26.

Lin

(2014c) Novel adaptive modified recurrent Legendre neural network control for a PMSM servo-driven electric scooter with V-belt continuously variable transmission system dynamics. Transactions of the Institute of Measurement and Control 37: 1181–1196.

27.

Lin

(2015a) Composite recurrent Laguerre orthogonal polynomials neural network dynamic control for continuously variable transmission system using altered particle swarm optimization. Nonlinear Dynamics 81: 1219–1245.

28.

Lin

(2015b) Novel adaptive recurrent Legendre neural network control for PMSM servo-drive electric scooter. ASME Journal of Dynamic Systems, Measurement and Control 137: 12 pages.

29.

Mahopatra

Gopalkumar

Somasekhar

. (2002) A novel scheme for six phase induction motor with open end windings. In: 28th Annual Conference of IEEE Industrial Electronics Society, Spain, 5–8 November, pp. 810–815.

30.

Mansouri

Asady

Gupta

(2015) The Bisection–artificial bee colony algorithm to solve fixed point problems. Applied Soft Computing 26: 143–148.

31.

Munoz

Lipo

(2000) Dual stator winding induction machine drive. IEEE Transactions on Industry Applications 36: 1369–1379.

32.

Ojo

Davidson

(2000) PWM-VSI inverter assisted stand-alone dual stator winding induction generator. IEEE Transactions on Industry Applications 36: 1604–1611.

33.

Pao

(1989) Adaptive Pattern Recognition and Neural Networks. Reading, MA: Addison-Wesley.

34.

Pao

Philips

(1995) The functional link net and learning optimal control. Neurocomputing 9: 149–164.

35.

Patra

Pal

Chatterji

. (1999) Identification of nonlinear dynamic systems using functional link artificial neural networks. IEEE Transactions on Systems Man Cybernetics – B 29: 254–262.

36.

Sastry

Santharam

Unnikrishnan

(1994) Memory neural networks for identification and control of dynamical systems. IEEE Transactions on Neural Networks 5: 306–319.

37.

Singh

Nam

Lim

(2005) A simple indirect field-oriented control scheme for multiphase induction machine. IEEE Transactions on Industrial Electronics 52: 1177–1184.

38.

Slotine

JJE

(1991) Applied Nonlinear Control. Englewood Cliffs, NJ: Prentice-Hall.

39.

Srivastava

Haque

(2008) Transient dynamics of metal V-belt CVT: effects of bandpack slip and friction characteristic. Mechanism and Machine Theory 43: 457–479.

40.

Srivastava

Haque

(2009) A review on belt and chain continuously variable transmissions (CVT): dynamics and control. Mechanism and Machine Theory 44: 19–41.

41.

Zhu

Liu

. (2013) An online outlier detection method based on wavelet technique and robust RBF network. Transactions of the Institute of Measurement and Control 35: 1046–1057.

42.

Tseng

Chen

Lin

. (2008) A hybrid dynamic simulation model for urban scooters with a mechanical-type CVT. In: IEEE International Conference on Automation and Logistics, Qingdao, China, 1–3 September, pp. 519–519.

43.

Tseng

Lue

Lin

. (2009) Dynamic simulation model for hybrid electric scooters. In: IEEE International Symposium on Industrial Electronics, Seoul, Korea, 5–8 July, pp. 1464–1469.

44.

Wang

Bai

Zhao

(2010) Robot manipulator calibration using neural network and a camera-based measurement system. Transactions of the Institute of Measurement and Control 34: 105–121.

45.

Zhang

Fang

(2007) Flutter analysis of an airfoil with bounded random parameters in incompressible flow via Gegenbauer polynomial approximation. Aerospace Science and Technology 11: 518–526.

46.

Xiang

(2013) An efficient and robust artificial bee colony algorithm for numerical optimization. Computers and Operations Research 40: 1256–1265.

47.

Cai

Zou

(2014) Neural-network-based robot time-varying force control with uncertain manipulator–environment system. Transactions of the Institute of Measurement and Control 36: 999–1009.

48.

Zhang

(2009) Gegenbauer neural network and its weights-direct determination method. IET Electronics Letters 45: 1184–1185.