The influence of furniture and equipment layouts on airflow pattern in a clean room

Abstract

The layout of the production line in any clean rooms will change according to the production process and this posed a problem for post clean room maintenance. Air velocity is one of the many problematic issues commonly found in clean room environment. It is important to address this on-going problem whenever there is an upgrading of the production process in which more advanced equipment were being introduced to the clean room to automate the process. This paper examines the characteristics of airflow distribution within the clean room due to changes in the production process. This study was conducted for a class 100 clean room at a disk-drive manufacturing firm. The airflow distribution in the clean room was simulated using computational fluid dynamics (CFD) software. This model provides a valuable insight into the processes that are difficult and time-consuming to study experimentally. The results showed that furniture such as a workbench and a laminar flow hood have great impact on the airflow pattern in the clean room. The predicted airflow results offered substantial benefits in the design and development of a better furniture layout plan that eradicates any of the possible turbulence problems.

Get full access to this article

View all access options for this article.

References

FED-STD-209D Federal standard – clean room and workstation, requirements, controlled environment. Commissioner Federal Agency.

Broyd TW , Dean RB , Oldfield SG . The use of a computational method to assess the safety and quality of ventilation in industrial buildings Institute of Mechanical Engineers Conference on Heat and Fluid Flow in Nuclear and Process Plant Safety, London, 1983: 65–74.

Broyd TW , Dean RB , Oldfield SG . The use of computational modeling techniques for clean room design. Semicon/Europa 1983 Semiconductor Processing and Equipment Symposium, Zurich, Switzerland, 1983: 324–347.

Chen Q , Van der Kooi J . Accuracy of a program for combined problems of energy analysis indoor air flow and air quality. ASHRAE Trans. 1988; 94(2): 196–214.

Chen Q . Indoor airflow, air quality and energy consumption of buildings. Netherlands, Technical University Delft, 1989.

Chen Q , Meyers CA , Van der Kooi J . Convective heat transfer in rooms with mixed convection. International Seminar on Indoor Air Flow Patterns, University of Liege, Belgium, 1989.

Murakami S , Kato S , Suyama Y . Numerical study on diffusion field as affected by arrangement of supply and exhaust openings in convectional flow type clean room. ASHRAE Trans. 1989; 95(2): 113–127.

Schulte TE , Bergstrom DJ , Bugg JD . Numerical simulation of three-dimensional airflow in unfurbished rooms. ASHRAE Trans. 1998; 104(2): 68–76.

Kozicki MN , Hoenig SA , Robinson PJ . Cleanrooms – facilities and practices. New York: Van Nostrand Reinhold, 1991.

10.

FLUENT . Fluent Users Guide. USA: Fluent Inc, 1997.