Automatic detection of depleted fixture trap seals using the reflected wave technique

The loss of fixture trap seals presents a potential cross-contamination route for sewer-borne pathogens. The defective trap identification method was developed to assess the status of trap seals using a non-destructive ‘sonar-like’ test based on the reflected wave technique. System diagnosis, proven over several years of laboratory and sited-based validation, primarily depended on manual interpretation of system pressure responses to identify the trap location from the reflected wave return time. This paper advances the technique by introducing the developed ‘TRACER’ program which includes a time series change detection algorithm allowing automatic system diagnosis. Outputs were validated against simulations using the AIRNET numerical model which, together with the ‘PROBE’ Method, was used to determine trap pipe periods, and therefore the location of defective trap seals, with improved accuracy over those calculated theoretically. This technique thus provides a reliable and automated approach to monitoring the protective seal between habitable space and the sewer network.

Practical application: Once installed, the building drainage system is often afforded little consideration in terms of regular maintenance, due partly to the problem of the ‘out of sight, out of mind’ mentality which is so often associated with this fundamental system, but also due to the practicalities of executing such an onerous task. Armed with a greater appreciation of the health risks associated with fixture trap seal loss, due to understanding its role in the transmission of the severe acute respiratory syndrome virus in 2003, building owners, operators and regulators must take action to safeguard the integrity of this important protective seal.